Use the links
above to navigate our on-line catalog.
All prices
listed are in U.S. Dollars ($). Use the Personal
Currency Assistant to convert your local currency.
Electronics for Motorcycle Lighting Control
#2328 Wiring and Relay Kit
#4709 Diode Isolation Kit
#4710 Run-Turn-Brake Controller
#13-307 LED Conversion Harness
#4810 Load Equalizer for Signals
#16-28 Illuminated Rocker Switch
Lighting Control Electronics- These kits are
those most used by Scootworks in custom installations in our own Service Department and
Custom Bike Shop, and are highly recomended by us.
-> #2328 Wiring and Relay
Kit - When using
Halogen Silver Bullets as additional driving lights (or any 50+ watt driving lamps, for that matter),
we strongly
recommend wiring them separately to avoid overloading the
headlight circuit. Our kit provides you with a switch, relay,
universal wiring harness and general instructions for
installation. The kit is not intended for any particular
application, but is easily adaptable to any motorcycle.
- $28.49 BUY
THIS ITEM(photo)
-> #4709 Diode Isolation Kit - $6.60 This is often required on bikes with single turn signal indicator in instrument cluster to prevent 'cross-talk' between LED lights. BUY THIS ITEMInstallation Instructions(photo)
-> #4710 Universal Run-Turn-Brake Controller - $56.95 This slick little module
will convert single filament (1156-style) rear lamps from only blinkers to run lights, aux. brake lights, and turn signals. It also has a built-in brake light modulator that will flash the
brake lights 5 times, then turn solid, when brakes are applied. The brake light modulator is also easily disabled, if not desired. The module can also be wired to only serve as Turn-Run lights, by simply
leaving the brake input disconnected. A heck of a deal for all of these features! BUY THIS ITEMInstallation Instructions(photo)
-> #4610 Plug-N-Play Run-Turn-Brake Controller, Honda - $75.95 Same
as #4710 above, except Plug-N-Play for Honda Aero 750, Spirit 750 ('07+ shaft drive), VTX 1300 ('06+), VTX 1800 C ('05+), VTX 1800 R/S ('04+) BUY THIS ITEM(photo)
-> #4611 Plug-N-Play Run-Turn-Brake Controller, Honda - $75.95 Same
as #4710 above, except Plug-N-Play for Honda Ace 750 ('02-'03), VTX 1300 (all models, '03-'05), VTX 1800 R/S ('02-'03), VTX 1800 C ('04) BUY THIS ITEM(photo)
-> #4612 Plug-N-Play Run-Turn-Brake Controller, Yamaha - $75.95 Same
as #4710 above, except Plug-N-Play for Yamaha V-Star 650 ('04+), V-Star 1100 ('04+), V-Star 1300, Road Star 1700 ('04+) [except Warrior] BUY THIS ITEM(photo)
-> #4613 Plug-N-Play Run-Turn-Brake Controller, Yamaha - $75.95 Same
as #4710 above, except Plug-N-Play for Yamaha V-Star 650 ('99-'03), V-Star 1100 ('99-'03), Road Star 1600 ('99-'03) [except Warrior] BUY THIS ITEM(photo)
-> #13-307 LED Conversion Harness - $7.55
Here's a neat way to convert OEM turn signals to LED without losing the dual
functionality of the lights on Honda motorcycles. This LED Dual Conversion Harness
allows LED Marker Lights to operate as running and turn signal lightsOne harness is
needed for each individual light. This item is not required with Show Chrome
Accessories® Conversion Kits. BUY THIS ITEM(photo)
-> #4810 Load Equalizer - $16.10 This module
is often required to correct flasher blink rates, when installing L.E.D. lighting on your bike. Easily installed, and complete
with everything you need...including instructions! BUY THIS ITEMInstallation Instructions(photo)
-> #13-306 Electronic Signal Light Flasher - $22.95 This module
is an electronic signal light flasher, and the most efficient way of correcting signal light flash rates on
Honda cruisers when LED turn signals have been installed. Plug-n-play on Honda cruisers! BUY THIS ITEM(photo)
-> #16-28 Illuminated Rocker Switch - $2.80
This simple hole-mount rocker switch is illuminated when 'on', and easily mounted through steering head covers, side covers, or other body trim. The contacts are rated for 10 amps, while
the illumination circuit requires 12 vdc. A great way to control loads up to 120 watts. BUY THIS ITEM(photo)
Billet Auxiliary
Light Switch- This unique switch fits
right on your motorcycle handlebar and can be used to turn your light
bar lights (or other auxiliary lights) on and off independently from
your hi or low beam light switch. The switch is a single pole switch and
manufactured of billet aluminum with a chrome finish. Available for 7/8" and 1"
handlebars.
-> Auxiliary Light
Switch for 7/8" bars - $34.95 BUY THIS ITEM
-> Auxiliary Light
Switch for 1" bars- $34.95 BUY THIS ITEM
Scootworks Aux Switch, Reservoir/Clutch Perch Mounted
Scootworks New Auxiliary
Light Switch for Reservoir or Clutch Perch Mount- This cool switch
installs on your Front Brake Reservoir mount, for an easy addition of electrical control for
aux. devices like light bars, decorative lighting, etc. Can also be installed on the
Clutch Perch mount of many motorcycles. Fits Honda and Yamaha motorcycles, and other bikes
with 1-3/8" bolt spacing. Beautiful mirror finish! Used to switch your light
bar lighting (or other auxiliary lights) 'on' and 'off' independently from
your hi or low beam light switch. The switch is a single pole switch, rated at 140 watts
continuous, and comes complete with weatherproof boot. New stainless steel bolts, spacers, and
everything needed to install this switch on your bars is included.
Back-Off Module- Brake
light modulator. The Back Off signal consists of three short light pulses followed by one long
pulse (Cycle time approximately 6 seconds), then recycles. Really gets the attention of
those behind you. Easily installs, only two wires to connect!
