21" chrome wheel
installed on a VLX using Scootworks wheel adapter kit. (wheel and tire not
included, fork bullets sold separately below)
21" chrome
front wheel
installed on a '97 VLX Deluxe w/chrome rear wheel cover (sold below).
Makes a GREAT looking combination! (adjustable rear lowering kit also
available-- check out the lowering kit catalog page for more information)
VLX
(VT-600) Front Wheel Adapter Kit-Scootworks
new wheel adapter kit will allow you to change from spokes to a new custom
aluminum or chrome wheel on the front of your Honda cruiser in just
minutes!
Until
now, custom wheels were only available for H-D or other custom built
motorcycles and were rarely seen on mid-size metric bikes. Now you can install one
on your Shadow, and NO modifications to your bike are
necessary! There is a tremendous aftermarket supply of wheel designs from
companies like Rev-Tech, RC Components, Iron Horse, and others for you to
choose from. Select
any 19" or 21" aftermarket wheel, install onto our wheel adapter
kit and get ready to rumble!
Scootworks
Front Wheel Adapter Kit Includes:
Custom designed wheel/front
brake rotor adapter, mounts to your new wheel allowing the use of your factory Honda brake
rotor! CAD designed and CNC manufactured of 6160 billet aluminum and hand
polished to a mirror finish by local craftsmen.
New Slim-line
speedometer drive (optional chrome cover available below)
Speedometer cable.
New custom built front
axle
Polished aluminum spacers and
chrome mounting hardware.
Complete detailed
instruction manual to make installation easy with a minimum of tools!
Takes less than 30 minutes to install.
Sample packs of Luster
Lace, a premium billet polish to keep your billet parts with a mirror
like finish.
For all aftermarket and Harley Davidson
Narrow Glide 2.15" width wheels with sealed 3/4" I.D. bearings. This would be
any wheels that fit '84-'99 Dyna-Glide, FXR, or XL (Sportster).
600 VLX (VT-600)
Front Wheel Adapter Kit (88+) for 19" wheel-
$199.99
BUY
THIS ITEM
600 VLX (VT-600)
Front Wheel Adapter Kit (88+) for 21" wheel- $199.99 BUY
THIS ITEM
Chrome Plated
Speedometer Drive Cover- $19.99 BUY
THIS ITEM
Shown installed on a Honda VLX
(VT600/600 Steed)
Shown installed on a Honda Sprit 750
Honda Chrome Wheel
Covers- These wheel
covers are designed to cover spoke wheels and are made of heavy sheet
steel with a beautiful chrome finish. Provides that cool 'solid wheel look' for a fraction of the cost of
a wheel replacement! Solid performers in the field, we've NEVER had a single complaint about loosening or noise.
-> Ace & Spirit 750 (chain/belt driven models only!). Fits all years. $284.95 BUY
THIS ITEM
-> Ace 750 Front Wheel Cover (all w/17" front wheel) $284.95 BUY
THIS ITEM
-> Ace 1100 Front Wheel Cover ('96-'99 w/18" front wheel) $284.95 BUY
THIS ITEM
-> Aero 1100 Front Wheel Cover (all w/17" front wheel) $284.95 !IN STOCK! BUY
THIS ITEM
Wheel Accessories
#1-239 Hub Cover, VLX 600
#1208 Hub Cover, VTX 1300
Hub Covers for Front Wheels
#1-239 Hub CoverVLX 600 Front WheelEasy
to install front hub cover adds a splash of chrome and a classic look to your VT-600/600 VLX front
wheel. - $37.95 BUY THIS ITEM
#1208 Hub Covers for VTX1300 Front Wheel (pair)Bring some flash to the spun
aluminum hubs on your VTX1300. Our chrome-plated die-cast, directional hub covers fit
perfectly, giving you the benefit of custom wheels without the expense. Installation is
quite simple, but does require removing the front wheel. - $66.45 (pair) BUY THIS ITEM
Front Axle Plugs and Covers
Stiletto Axle Nut Caps for VTX
Front Axle Covers-
Front axle covers for the Magna 750, Ace/Spirit 750,
and all models of the VT-1100 from '87-present except Aero. Easy to install! -
$28.45 (pair) BUY
THIS ITEM(photo)
Billet Front Axle Plug for RH side of Valkyrie, Valkyrie Interstate,
VTX 1300 (all), and VTX 1800 (all)- $16.10 BUY
THIS ITEM(photo)
Billet Front Axle Cover for LH side of Valkyrie, Valkyrie Interstate,
VTX 1300 (all), and VTX 1800 (all)- $12.25 BUY
THIS ITEM(photo)
#1207 Stiletto Axle Nut Caps for VTX. Fits:
VTX 1300 (all), and VTX 1800 (all)- $75.95 BUY
THIS ITEM(photo)
Rear Axle Cover on VT-600
Billet Rear Axle Covers
Rear Axle Covers-
Rear axle covers for the VLX 600 / VT-600
from Show Chrome covers the unsightly rear axle and adjusters. Easy to install! Fits all 600 VLX, VLX Deluxe, Shadow 600, and VT-600's from
'88 to present. Also fits the Steed 400 and 400 VLX- $85.45 BUY
THIS ITEM(photo)
Billet Rear axle covers for the 750
Shadow ACE & 750 Spirit ('98+) [pair]- $33.20 BUY
THIS ITEM(photo)
Front
Brake Caliper Covers by CWI-
Beautiful
show chrome covers add a very nice touch to the front of your bike! Chrome
mounting hardware included.
VTX 1800 Custom and
Retro (2 sides) - $284.95 BUY
THIS ITEM
Front Brake Caliper Covers by Kuryakyn-
In
only minutes, you can make art out of an otherwise drab looking caliper. These covers install
easily with no tools or fasteners. Add the bleeder fitting cover and banjo bolt cover with
these and you'll be lookin' smart!
Front Brake Caliper Covers by
Show Chrome- These caliper covers are attractively designed
by Show Chrome with the 'ribbed' or 'stepped' pattern as used throughout their line of cruiser accessories.
Easily installs with two bolts, allow for plenty of ventilation for brake caliper. Sturdy
steel construction with a deep chrome finish.
#55-310 Caliper Cover - Stepped (right side)
Fits Honda VTX1300 R/C. All mounting hardware provided. - $56.95
BUY THIS ITEM(photo)
#55-107L Caliper Cover - Stepped (left side) Fits
Honda VTX1800 Retro/Custom. All
mounting hardware provided. - $61.70
BUY THIS ITEM(photo)
#55-107R Caliper Cover - Stepped (right side) Fits
Honda VTX1800 Retro/Custom. All
mounting hardware provided. - $61.70
BUY THIS ITEM(photo)
Front Caliper Accent
Front Brake Caliper Accents-
These caliper accents are available in smooth, fluted, and swept designs. Easily attached
in minutes, to give your brake calipers an added bit of detail.
Rear Brake
Caliper Covers-
Stamped steel raised and chromed rear brake caliper cover. Mounts
with new hardware, no drilling required for installation. Beautiful dress-up part!
-> [BB] Rear Brake
Caliper Cover- Fits VTX 1300 Standard & Retro - $56.95
BUY THIS ITEM(photo)
-> [K] #1288 Rear Brake
Caliper Cover- Fits ALL VTX 1300 models - $37.99
BUY THIS ITEM(photo)
-> [BB] Rear Brake
Caliper Cover- Fits VTX 1800 Standard & Retro - $56.95
BUY THIS ITEM(photo)
Rear Brake
Caliper Accents-
These chrome plated billet aluminum covers add serious sparkle
to your otherwise boring rear brake caliper. They are attached with tough 3m adhesive, and they
won't fall off!
Rear Brake
Caliper Accent, Swept Style - Fits all VTX 1300's - $28.45
BUY THIS ITEM(photo)
Rear Sprocket Cover on VT-600
Rear Sprocket Covers-
Rear sprocket covers for the VLX 600 / VT-600
from Show Chrome covers that greasy rear sprocket assembly. Easy to install! Fits all 600 VLX, VLX Deluxe, Shadow 600, and VT-600's from
'88 to present. Also fits the Steed 400 and 400 VLX- $24.65 BUY
THIS ITEM(photo)
Chrome Banjo Bolt and Brake Bleeder Covers
#2018 Bleeder cover- This little gem is the perfect compliment to the Banjo Bolt Cover below. Easily installed over the stock rubber cover, this piece provides a nice detail when dressing up brake calipers on metric cruisers. - $9.45 BUY THIS ITEM(PHOTO)
#2013 - Same as #2018 above, except sold in pairs for more savings! - $18.00 BUY THIS ITEM(PHOTO)
#2015 Fluted Banjo bolt cover- This trick little cover "erases" nasty looking zinc or cad plated brake line fittings that are very prone to rust or corrosion. They also add finishing detail to Master Cylinder Covers and Caliper Covers. Fits most cruisers with banjo fittings requiring a 12 mm wrench. - $14.20 BUY THIS ITEM(PHOTO)
#1-319 Smooth Billet Bleeder bolt cover- Smooth chrome cover is easy to install! - $11.35 BUY THIS ITEM(PHOTO)
#1-318 Smooth Chrome Banjo bolt cover- Smooth chrome cover is easy to install! - $12.30 BUY THIS ITEM(PHOTO)
CWI Bullets with blunt tip...
Show Chrome Fork Bullets
Honda Chrome
Fork Bullets- These
easily installed show chrome fork tips add a great look to your
motorcycle. (sold in pairs)
-> VTX1300 (all) by Show Chrome- $119.65 BUY
THIS ITEM
-> Valkyrie / Tourer (all) by CWI- $189.95 BUY
THIS ITEM
-> Valkyrie / Tourer (NOT models with front wheel speedometer drive) by Show Chrome- $119.65 BUY
THIS ITEM
Warheads
for Honda Cruisers- Drop
the bomb! The next generation has arrived. Are you ready? These mean
little monsters slide over your forks and are designed to portray
aggressive, unruly and unsocial behavior. Forget what everybody else is
bolting on their bike! You lead the trend. Guaranteed to make them
circle and stare at the next rally. Warheads are machined from
extruded billet aluminum and chrome plated. They
attach with two set screws per part, and we have NEVER had a single unit to come loose! They come in Smooth and Speed
Milled. Honda bolt kit included.
-> Eagle Front Fender Ornament
This bird is the word! Your front fender will take on
new life with this majestically sculpted chrome and gold eagle with amber lighted
eyes. One screw and the top comes off for easy bulb replacement. - $37.95 BUY THIS ITEM(PHOTO)
Studded Mudflap
Mud Flaps and Mud Guards
-> #DL-Flap
Studded leather mudflap customized by Scootworks to include
a cool Mustang chrome concho. Great way to dress up your fender while stopping
mud and stones from being thrown into the front of your engine and/or radiator! - $29.95 BUY THIS ITEM(PHOTO)(pic on bike)
VTX Fender Louvers
VTX Chrome Fender Louvers
-> #9018 Front Fender Louvers
Beautiful, easily installed chrome fender louvers for the Honda VTX Retro. Add
a nice touch of sparkle to the front fender of your bike! - $28.49 BUY THIS ITEM(PHOTO)
-> #9019 Rear Fender Louvers
Awesome chrome fender louvers for the rear fender of your Honda VTX Retro. Easy to
install, and adds a nice touch of sparkle to the rear fender of your bike! - $28.49 BUY THIS ITEM(PHOTO)
Front Fender Rail/Bumper
Front Fender Rail for VT1100 Sabre
Front Fender Extension/Trim
Fender Rails/Bumpers and Trim
-> #53-411
Chrome Front Fender Rail - Steel twin rail design mounts
to front forks. Bolts on easily to original fender mounting bracket. FITS: Honda
VT750 ACE - $61.70 BUY THIS ITEM(PHOTO)
-> #53-433
Chrome Front Fender Rail - Steel twin rail design mounts
to front forks. Bolts on easily to original fender mounting bracket. FITS: Honda
VT750 AERO - $61.70 BUY THIS ITEM(PHOTO)
-> #53-726
Chrome Front Fender Extension/Trim - This chrome steel
extension gives your bike a touch of shine with the popular ribbed pattern.. FITS:
Honda VT750 ACE, VT1100 Sabre - $66.45 BUY THIS ITEM(PHOTO)
-> #53-111
Chrome Front Fender Rail - Steel twin rail design mounts
to front forks. Bolts on easily to original fender mounting bracket. FITS: Honda
VT1100 Shadow ACE, VT1100 ACE Tourer - $47.45 BUY THIS ITEM(PHOTO)
-> #53-119
Chrome Front Fender Rail - Steel twin rail design mounts
to front forks. Bolts on easily to original fender mounting bracket. FITS: Honda
VT1100 Sabre - $61.70 BUY THIS ITEM(PHOTO)
-> #55-317
Chrome Front Fender Rail - Steel twin rail design mounts
to front forks. Bolts on easily to original fender mounting bracket. FITS: Honda
VTX1300 Retro - $61.70 BUY THIS ITEM(PHOTO)
-> #55-137
Chrome Front Fender Rail - Steel twin rail design mounts
to front forks. Bolts on easily to original fender mounting bracket. FITS: Honda
VTX1800 Retro - $43.65 BUY THIS ITEM(PHOTO)
2pc Front Fender Trim
1 pc Rear Fender Trim
1 pc Front Fender Trim
National Cycle Fender Tips
--VLX 600---
-> #N726 Rear
Fender Trim, VLX 600 -
Fits VT600, VLX 600, and 6000 VLX Deluxe, Also fits
the VT-400 and 400 Steed (export model) - $71.20 BUY THIS ITEM
--Aero 750---
-> #N7015 Front
Fender Trim, Aero 750 -
2 Piece front fender trim for front and rear edges of
front fender - $137.70 BUY THIS ITEM(PHOTO)
-> #N7016 Rear
Fender Trim, Aero 750 -
1 Piece rear fender trim for rear edge of
rear fender - $80.70 BUY THIS ITEM(PHOTO)
--ACE 750---
-> #N733 Front
Fender Trim, Ace 750 -
2 Piece front fender trim for front and rear edges of
front fender - $123.45 BUY THIS ITEM
-> #N734 Rear
Fender Trim, Ace 750 -
1 Piece rear fender trim for rear edge of
rear fender - $71.20 BUY THIS ITEM
--VT1100 Spirit/Shadow---
-> #N731 Front
Fender Trim, 1100 Spirit/Shadow -
Fits VT1100 Shadow ('87-'96), Shadow Spirit ('97+)
- $61.70 BUY THIS ITEM(PHOTO)
-> #N7001 Front
Fender Trim, VTX 1800 C/F -
2 Piece front fender trim for front and rear edges of
front fender - $137.70 BUY THIS ITEM(PHOTO)
-> #N7002 Rear
Fender Trim, VTX 1800 C -
1 Piece rear fender trim for rear edge of
rear fender - $80.70 BUY THIS ITEM(PHOTO)
--VTX 1800 R/S---
-> #N7003 Front
Fender Trim, VTX 1800 R/S -
2 Piece front fender trim for front and rear edges of
front fender - $137.70 BUY THIS ITEM(PHOTO)
-> #N7004 Rear
Fender Trim, VTX 1800 R/S -
1 Piece rear fender trim for rear edge of
rear fender - $80.70 BUY THIS ITEM(PHOTO)
Smooth Front Fender Tip
Triceptor Front Fender Tip
Kuryakyn Fender Tips
-> #7344 Smooth Front Fender Tip-
Fits all VTX1300 & VTX1800. Installs easily, no drilling required -
$28.49 BUY THIS ITEM(PHOTO)
-> #7340 Triceptor Front Fender Tip-
Fits all VTX1300 & VTX1800. Installs easily, no drilling required -
$37.99 BUY THIS ITEM(PHOTO)
Valve Stem Caps, Inflators, etc.
Valve Stem Covers
CO2 Inflator and Refills
Tire Stuff -
Valve Stem covers to add the finishing touch to your wheels, Air Pressure
Gauges to keep the pressure in check, and CO2 Inflators and Refills to get you back up and
rolling quickly!
-> Ribbed Valve Stem Covers- $6.60 (pair)
BUY
THIS ITEM
-> Eagle Valve Stem Covers- $12.30 (pair)
BUY
THIS ITEM
-> UltraFlate + CO2 Tire Inflator. Refills
tires instantly from a small CO2 container...easily stored in windshield bag or tool roll,
COMPACT Security for your tires! - $18.95
BUY
THIS ITEM(photo)
-> Moose CO2 Tire Inflator Refills for
UltraFlate+ - $12.30
BUY
THIS ITEM(photo)
*Scootworks products are protected by patent pending,
US/International patents, and/or intellectual property rights. Reproduction without
express written permission from Scootworks is forbidden and will be prosecuted to the fullest
extent of the law.
