1458 Mirror Mounts for Sport Bikes -
Replace your stock bug antenna mirrors & add the personal
style you want with these adjustable Mirror Mounts for Sport Bikes. Simply select & add custom
Küryakyn Mirrors or any other mirrors that mount with a 5/16-18 bolt. Quality die-cast
construction finished in sparkling chrome with a black rubber mounting pad. These mounts are a
must have!
Note: Installation requires mirror to be mounted on the outside of the fairing. Extremely large
billet mirrors may weigh more than stock mirrors & are not suggested for use with "stunt" style
riding.
Fits: Universal fitment for sport bikes with mirror bolt spacings from 1” to 1-5/8” apart
Kawasaki: All ’00-’08 ZX6R, ’04-’08 ZX10R, & ’06-’08 ZX14R
Chrome Switch Head Housings & Covers for Kawasaki!
Handlebar
Control Head Housings and Covers -
Cover up unsightly housings and create a smooth, full-custom look with these chrome switch head
covers or replacement switch heads. Clamshell-design chrome covers. They install easily and
encapsulate the stock housings without interfering with control functions. Simply install over
the top of your existing switch heads, no need to tinker with the internal wiring or switches!
They’re an awesome accent to ISO-Grips and our custom mirrors. The Switch Head Housings are
a copy of the switch housings in chrome...not a cover!
-> #9112 Switch Head Cover -
FITS: Kawasaki Vulcan 900 (all), Vulcan Mean Streak 1500/1600, Vulcan 2000 $63.13 (pair) BUY
THIS ITEMInstallation Instructions
-> #63-136 Switch Head Housings -
FITS: Kawasaki Vulcan 1500 Classic ('99+), Drifter 800/1500 (all), Nomad 1500/1600, 1600 Classic. NOTE* -
_NOT_ 800 Classic or "A". $72.15 (pair) BUY
THIS ITEM
-> #81-110 Switch Head Housings -
FITS: Kawasaki Vulcan 900 (all), Vulcan Mean Streak 1500/1600, Vulcan 2000. NOTE: Fits all Kawasaki cruisers where the
throttle cables exit the switch head ABOVE the front brake lever, not from the bottom of the switch head like on the
older 1500 Classic. $81.18 (pair) BUY
THIS ITEM
Billet
Mirrors- SCORPION mirrors are HOT!
One piece CNC machined billet mirrors with beautiful chrome plating. The
front side of the mirror is flat. The flat glass in these mirrors have a
light blue tint for a totally different look. No adapters required,
comes complete with all mounting hardware. This is a new item here at
Scootworks! Available in teardrop or rectangle shapes.
Maltese Cross Mirrors -
These awesome Maltese Cross Mirrors are dripping in chrome,
have a knurled outer diameter, and a raised Maltese Cross design on the back side.
-> 1445 Kawasaki mounting hardware- $8.98
(for pair of mirrors) BUY
THIS ITEM
Blind Spot Turn Signal Mirrors -
These cool mirrors are designed to direct an LED Amber turn
signal to the side, to get the attention of drivers in your “blind spot”.
-> 1445 Kawasaki mounting hardware- $8.98
(for pair of mirrors) BUY
THIS ITEM
Zombie™ Mirror -
We’ve taken your run-of-the-mill skull and added 35% more
angst and 20% more anguish to make these the nastiest mirrors on the street. Overall, the
mirror head is about 3” x 4” with round glass 3” in diameter. The smoothly arched stem
positions the center of the mirror head about 4-3/8” above and 5-1/2” outboard of the
mounting point on the handlebar control. The adjustment mechanism is unlike anything out
there; the swivel ball is captured between opposing pins. The pins are threaded to allow
quick and easy tension adjustment.
-> 1445 Kawasaki mounting hardware- $8.98
(for pair of mirrors) BUY
THIS ITEM
Scythe Mirrors -
One of the most wicked looking mirror packages
on the road! Sickle-shaped stems and angular mirror heads are among the cool features
of these mirrors.
-> 1445 Kawasaki mounting hardware- $8.98
(for pair of mirrors) BUY
THIS ITEM
Magnum™
and Ellipse Mirrors by Kuryakyn-
Called 'Magnum™' because of their rugged design. Every component has been beefed up. Unlike
others' flimsy mirrors, these feature sturdy stems and an oversized adjuster ball that holds
its position under the toughest conditions. Available in two head sizes:
approximately the same
square-inch head size as stock; or 20% smaller than stock. The Ellipse Mirrors feature convex
glass to minimize blur from vibration. All require the mounting hardware sold separately below.
-> #1428 Magnum™ Mirror- Small- $72.19
(pair) BUY
THIS ITEM
-> #1430 Magnum™ Mirror- Large- $72.19
(pair) BUY
THIS ITEM
-> #1445 Kawasaki mounting hardware- $8.98
(for pair of mirrors) BUY
THIS ITEM
Signal Light Mirrors
Stealth Mirrors
Signal
Light Mirrors-
This Küryakyn original looks good coming and going. From the drivers seat, they are a functional,
great looking custom mirror. A heavy duty locking mechanism and swivel ball keep these mirrors
adjusted just where you want them. Looking at the mirrors from the front, you’ll notice a bank
of L.E.D.’s that work as a running light and a super bright auxiliary turn signal. Unlike other
lighted mirrors, these lights only face forward so glare is not a factor. The life of this
light source will be several times that of incandescent bulbs. The necessary load equalizer is
included with this kit.
-> #1431 Ellipse Mirrors w/built-in LED signals $162.40
(pair) BUY
THIS ITEM
-> #1445 Kawasaki mounting hardware- $8.98
(for pair of mirrors) BUY
THIS ITEM
Stealth Mirrors-
These stealth style mirrors have clean back surfaces with no visual assembly screws to spoil
the look. Manufactured in the traditional a oval shape. Comes with 10mm mount to fit most
metric cruisers.
-> #1-200 Stealth Mirrors $76.67
(pair) BUY
THIS ITEM
Superman Micro, fluted
Teardrop w/milled back
Custom Slotted w/fluted back
Countour Mirror
Fireman Mirror
Custom
Mirrors from KW -
With styling typically found only on mirrors from Arlen Ness and the like, these new cool custom
mirrors from KW are making the scene quickly. Click on the photo links beside each item below
to see these slick new styles! (**NOTE** Requires the #1445 mounting hardware at the bottom of this section)
-> #1445 Kawasaki mounting hardware- $8.98
(for pair of mirrors) BUY
THIS ITEM
Chrome Cable Covering
Spring-style Chrome Hose/Wiring Covering
Chrome Cable Covering-
This synthetic Chrome Cable Covering
is available in various sizes, allowing it to hide
most electrical accessory lighting wiring in chrome. Synthetic
non-conductive composition makes it great for covering electrical wiring.
The Spring-type covering (2nd photo on left) is similar to that found on the hydraulic hoses of
many motorcycles as shipped from the factory. Our covering is chrome plated to
a high luster, unlike most of the OEM covering. It can also be used on electrical
wiring, and it's steel composition holds shape well in tight bends. This is packaged in
packs of 3 pieces, each being 31" long and 5/8" in diameter.
-> Chrome Cable Covering, 3/16" diameter x 5', spiral wrap - $7.17
BUY
THIS ITEM(photo)
-> Chrome Cable Covering, 5/16" diameter x 5', spiral wrap - $7.18
BUY
THIS ITEM(photo)
-> Chrome Cable Covering, 3/8" diameter x 3.5', split down one side - $15.30
BUY
THIS ITEM(photo)
Chrome Handlebar Wire Clips and Ties-
These clips are designed to snap into the holes on the underside
of your handlebars to cleanly route your wiring and/or cables from the switch heads and controls
down towards the triple trees. They can be installed in smooth bars by drilling holes for them
to snap into, or simply replace the black plactic guides already installed on your bars. The wire ties
are made of nylon, chrome plated, and are 7" long zip ties in a 10-pack.
Chrome Handlebar Cable & Hose Clamps -
Scootworks sources these in large quantities and is passing the
savings along to you! You'll not find a better deal on chrome throttle cable, clutch cable, and
hose clamps. These CNC machined and chromed beauties are just what the doctor ordered when you're
putting the finishing touches on the details of your bars...like cleanly routing your cables! These fit
1" and 1-1/4" handlebars and frame tubes (depending on the model selected). Grab a handful and get your
cable routing cleaned up today!
-> Chrome Ball Milled Dual Throttle Cable Clamp for 1" handlebars and 1" frame tube sections - $7.55
BUY
THIS ITEM(photo)
-> Chrome Ball Milled Clutch Cable Clamp for 1" handlebars and 1" frame tube sections - $7.55
BUY
THIS ITEM(photo)
-> Chrome Ball Milled Clutch Cable Clamp for 1-1/4" handlebars and 1-1/4" frame tube sections - $7.55
BUY
THIS ITEM(photo)
Handlebar/Riser Adapter Studs
Handlebar/Riser Adapter Studs -
These Adapter Studs are designed to screw into the bottom of any H-D/American Riser or
drag T-bar assembly to adapt them to the 10mm bores used on Kawasaki Cruisers. They are
custom machined, hardened, and finished with a tough black oxide top coat. Sold in pairs.
-> SWH-001 Coarse (most common), 1/2"-13 x m10-1.25
- 1/2"-13 coarse thread on one end to fit into the American riser/bars, m10 x 1.25 on the other to
fit down into your triple tree and use your OEM nuts. $17.95 (pair)
BUY
THIS ITEM
-> SWH-002 Fine, 1/2"-20 x m10-1.25
- 1/2"-20 fine thread on one end to fit into the American riser/bars, m10 x 1.25 on the other to
fit down into your triple tree and use your OEM nuts. $17.95 (pair)
BUY
THIS ITEM
Wide Style Levers in Chrome!
Chrome
Brake and Clutch Lever Sets -
These chrome levers are a beautiful addition to your bike. They are wider and more comfortable
than stock. Easy to install and inexpensive, a great way to add a bit more sparkle to your handlebars
and improve comfort at the same time!
Lever Accessories -
Foam-based lever grips (padding) and lever wraps are manufactured by Show Chrome. They slide over the brake and
clutch levers, providing gentle comfort for those long runs.
These durable lace-up lever covers/fringe are made of quality Black Leather by BBP. These Lever wraps are 1-3/4" x
4-1/2" wide add extra comfort and style to any Cruiser. Fringe measures 12" long, and can be easily
trimmed to any length with scissors.
-> #17-99 Lever Grips
Easily installed on all levers -$3.75 (pair)
BUY
THIS ITEM(photo)
-> #17-110 Lever Fringe
Lace-on lever fringe/leather by BBP - $11.69 (pair)
BUY
THIS ITEM(photo)
-> #350-114 Braided Lever Fringe
Lace-on lever fringe/leather by SACS, Pearl White/Black. 14-15
inches long; fringe is 10 1/2 - 11 inches long. Fringe can be trimmed to your preferred
length. - $27.03 (pair)
BUY
THIS ITEM(photo)
Free Spirit Reservoir Covers
Smooth Reservoir Cover
Reservoir Covers-
These reservoir covers are easily installed accessories to greatly
beautify your handlebar mounted master cylinder reservoirs. They come complete with everything
needed, including longer screws (if needed).
The simple addition of these trick Master Cylinder Covers will
really add sizzle to Vulcan Hand controls. Easily installed with only two fasteners, you'll be
stylin in no time! Fits: Clutch and Brake Master Cylinders.
EN500 ('96+)
-> #9108 Chrome Clutch Perch Cover
for Kawasaki Vulcan EN500
- $45.08 (each) BUY
THIS ITEM(photo)
-> #7810 Brake & Clutch Master Cylinder Covers (by Kuryakyn) for Vulcan EN500 ('96+) for the Brake Reservoir,
only 1/2 is needed. #9108 Clutch Perch cover above is needed for the EN500 Clutch lever perch.
- $45.08 (pair) BUY THIS ITEM
-> #7810 Brake & Clutch Master Cylinder Covers (by Kuryakyn) for Vulcan 800 (all) for the Brake Reservoir,
only 1/2 is needed. #9108 Clutch Perch cover above is needed for the VN800 Clutch lever perch.
- $45.08 (pair) BUY THIS ITEM
-> #7813 Front Brake Master Cylinder Cover
(by Kuryakyn) for Vulcan 900 Custom, Classic, & Classic LT - $45.12 (each) BUY
THIS ITEM
VN1500
-> #7810 Brake & Clutch Master Cylinder Covers (by Kuryakyn) for Vulcan 1500 Classic (Carb'd) and
1500 A, B, C, and L models, 1988-1997.
- $45.08 (pair) BUY THIS ITEM
-> #7811 Brake & Clutch Master Cylinder Covers
(by Kuryakyn) for Vulcan 1500 Classic, Vulcan 1500FI Classic, all Nomad 1500, 1500 Drifter 1998+ - $54.10 (pair) BUY
THIS ITEM
VN1600
-> #1743 Clutch Master Cylinder Cover
for Kawasaki all Vulcan 1600 models '03+, including Mean Streak - $45.12 (each) BUY
THIS ITEM(photo)
-> #7813 Front Brake Master Cylinder Cover
(by Kuryakyn) for all Vulcan 1600 models '03+, including Mean Streak - $45.12 (each) BUY
THIS ITEM
VN2000
-> #9108 Chrome Clutch Perch Cover
for Kawasaki VN2000 (all models) - $45.08 (each) BUY
THIS ITEM(photo)
-> #7813 Front Brake Master Cylinder Cover
(by Kuryakyn) for Vulcan VN2000 (all models) - $45.12 (each) BUY
THIS ITEM
