Use the links
above to navigate our on-line catalog.
All prices
listed are in U.S. Dollars ($). Use the Personal
Currency Assistant to convert your local currency.
The Water Buffalo System
The Ultimate Drink and Water Bottle Holder!
|
The NEW Water Buffalo Beverage Holder!
|
The NEW Water Buffalo Beverage
Holder - This innovative and low weight system will
accomodate handlebars, crash bars, nerf bars, and engine guards of several sizes... 7/8", 1", and 1 1/8", and even 1 1/4" in diameter!
Holds most any soda or water bottles or cans, and doesn't have a messy mug to contend with. Very light weight
and durable construction for years of service. EASY to install! Check out the photos below:
Photo 1
Photo 2
Photo 3
Photo 4
Photo 5
Photo 6
Photo 7
Photo 8
Photo 9
-> The NEW Water Buffalo Beverage Holder -
- $34.95
BUY THIS ITEM
|
|
The Extreme
Motorcycle Mug Holder
Motorcycle Mug
Holder & Accessories
|
Unobtrusive mounting bracket shown mounted on RH handlebar of Kawasaki Vulcan 800 (small black bracket)
Large 32 oz. Driver's set shown installed on Kawasaki Vulcan 800 (great for long road trips!)
Small 20oz. Driver's Set mounted on Kawasaki Vulcan 800
'Sip top' (included) for hot drinks!
Small 20oz. Driver's Set on Honda Shadow 600 VLX |
32 oz. set on ElectraGlide LH Drivers posiiton (can be mounted on either side)
The Butler
Motorcycle Mug Holder- This
mug holder is enjoyed by motorcyclists worldwide. No spills, No bouncing
out, the Butler motorcycle mug holder was specifically designed to
handle the rough conditions encountered while riding. They are so
good, the Scootworkers have them on their motorcycles! This motorcycle cup holder
is your perfect companion for the road.
Check out these
features:
- The motorcycle cup holder
installation is easy
- Designed to lock
the cup into the holder to prevent the cup from bouncing out on
rough terrain
- Insulated container keeps hot drinks
hot, and cold drinks cold
- Comes complete with straw top and closable straw for cold drinks, and sip top for hot drinks!
- Large handle, even
gloved hands can grab on
- Folds out of the
way when not in use
- The Butler motorcycle cup holder is
attractive on all bikes
- The driver set fits
on the handlebar
- The passenger set
fits on the armrest of most touring bikes, and is easily adapted for
use on Nomad, Venture, and other cruisers
- No modification to
your motorcycle is needed, and the kit comes complete with Metric and SAE hardware!
- Does not interfere
with your motorcycle controls
- Fits all
motorcycles that use the typical two-bolt clutch/brake handlebar
brackets/clamps
- Easily removed when
not in use or when parked
- REMEMBER, NEVER
DRINK AND DRIVE!
Large (34 oz.)
Driver's Set- Includes an
adjustable driver mounting bracket, mounting bolts and hardware,
one 34 oz. compression ring, one black 34 oz. Insulated
Aladdin beverage mug, one standard lid, one Butler extreme lid,
one seal-fit straw with two straw / vent caps- $54.72
BUY THIS ITEM
|
Small (20 oz.)
Driver's Set- Includes an
adjustable driver mounting bracket, mounting bolts and hardware,
one 20 oz. compression ring, one black 20 oz. Insulated
Aladdin beverage mug, one standard lid, one Butler extreme lid,
one seal-fit straw with two straw / vent caps- $54.72
BUY
THIS ITEM
|
Large (34 oz.)
Passenger's Set- Includes an
adjustable driver mounting bracket, mounting bolts and hardware,
one 34 oz. compression ring, one black 34 oz. Insulated
Aladdin beverage mug, one standard lid, one Butler extreme lid,
one seal-fit straw with two straw / vent caps- $54.72
BUY
THIS ITEM
|
Small (20 oz.)
Passenger's Set- Includes an
adjustable driver mounting bracket, mounting bolts and hardware,
one 20 oz. compression ring, one black 20 oz. Insulated
Aladdin beverage mug, one standard lid, one Butler extreme lid,
one seal-fit straw with two straw / vent caps- $54.72
BUY
THIS ITEM
|
20 oz. set on GL1800 Passenger posiiton
|
|
Large (34oz.) Cup Set
Small (20oz.) Cup Set
Lid Set
Drivers Bracket Set
Compression Ring
|
Extra
Cups, Lids, and Mounting Brackets-
It's always good to have a few extra cups and lids on hand for your
fellow bikers.
Large (34oz.) Cup Set-
Includes
one 34 oz. insulated
Aladdin beverage mug, one standard lid, one Butler extreme lid,
one seal-fit straw with two straw / vent caps- $14.30
BUY THIS ITEM
|
Small (20oz.) Cup Set-
Includes
one 20 oz. insulated
Aladdin beverage mug, one standard lid, one Butler extreme lid,
one seal-fit straw with two straw / vent caps- $14.30
BUY THIS ITEM
|
Large 6 Pack
Butler Extreme Lids- Includes
six 34 oz. Butler extreme lids, six seal-fit straws and
twelve straw / vent caps- $31.23
BUY THIS ITEM
|
Small 6 Pack
Butler Extreme Lids- Includes
six 20 oz. Butler extreme lids, six seal-fit straws and
twelve straw / vent caps- $31.23
BUY THIS ITEM
|
Driver's Bracket
Set- Includes mounting plate,
female hinge, and all required stainless steel hardware for
mounting- $27.94
BUY THIS ITEM
|
Passenger's
Bracket Set- Includes
mounting plate, female hinge, and all required stainless steel
hardware for mounting- $27.94
BUY THIS ITEM
|
Large Compression
Ring- Includes
one 34 oz. compression ring with bolt and knob- $19.00
BUY THIS ITEM
|
Small Compression
Ring- Includes
one 20 oz. compression ring with bolt and knob- $19.00
BUY THIS ITEM
|
32 oz. set on GL1800 LH Drivers posiiton (can be mounted on either side)
|
RoadRunner Drink Holder
RoadRunner Drink Holder
by Kuryakyn
|
RoadRunner Drink Holder on 1" Handlebars
|
RoadRunner Drink Holder
for 1" Handlebars- This cool chrome
drink holder mounts on the handlebars of most cruisers with 1" bars. Attach the
billet clamp to the handlebar and slide the cup holder ring in place. The
unique mounting ring makes it possible to position the cup vertically
no matter the angle of the bars. Includes 16-ounce insulated stainless steel cup.
|
|
