#8802 fits the following:
SUZUKI: Volusia 800 (R)
$18.99 (pair)
BUY THIS ITEM

#8820 fits the front peg mounts for the following:
SUZUKI: VS800 Intruder, VZ800 Marauder, VS1400 Intruder, Boulevard S50, Boulevard S83
$18.99 (pair)
BUY THIS ITEM

#8821 fits the rear peg mounts for the following:
SUZUKI: VS700 Intruder, VS750 Intruder, VS800 Intruder, VZ800 Marauder, VS1400 Intruder, VL1500LC Intruder, Boulevard S50, Boulevard S83, Boulevard C90
$18.99 (pair)
BUY THIS ITEM

#8822 fits the rear peg mounts for the following:
SUZUKI: M109R
$18.99 (pair)
BUY THIS ITEM

#8823 fits the rear peg mounts for the following:
SUZUKI: Boulevard C50, M50
$18.99 (pair)
BUY THIS ITEM

#7947 Footpeg Mount Offsets without Footpeg Adapters - Footpeg Mount offsets make it possible to adjust peg placement anywhere in a 360° radius 2-1/2 from the original mounting point. For instance very short passengers may position the peg 2-1/2 straight up from the stock position. Tall passengers can place the peg 2-1/2 lower than stock. (REQUIRES ONE SET OF FOOTPEG ADAPTERS FOR ATTACHMENT TO YOUR BIKE, AND ONE PAIR OF MALE MOUNT PEGS.) $44.05 (pair)
BUY THIS ITEM  (PHOTO)

#4029 (heel shift/brake pedal cover) FITS: Brake on Volusia 800, Boulevard M50, Boulevard C50, Marauder 800
$28.45
BUY THIS ITEM

#82-215 Brake Pedal cover FITS: Brake on Volusia 800, Boulevard M50, Boulevard C50, Marauder 800
$28.45
BUY THIS ITEM (photo)

#4034 (shifter peg cover) For oval shifters with a width of 5/8" or less. Recommended for use on all 2000-earlier models with an oval shifter, including oval heel-toe applications.
$18.04
BUY THIS ITEM

#4036 (shifter peg cover) For oval shifters with a width greater than 5/8". Recommended for use on all 2001+ models with an oval shifter, including oval heel-toe applications.
$18.00
BUY THIS ITEM

-> #4045 (brake pedal cover) FITS:
SUZUKI: '04-'06 Marauder 1600/Boulevard M95. Looks like the 4029.
$28.49
BUY THIS ITEM

#8004 (universal shifter peg) Like the 8021 below, but only 2-1/4" long. We use these in our shop for the beefiest and coolest metric shifter peg ever. Requires cutting off the OEM peg, drilling/tapping to 5/16-24 for installation. Info on installation can be seen HERE and HERE.
$14.24
BUY THIS ITEM

#8021 (universal shifter peg) This peg is 2-3/4" long. We use these in our shop for the beefiest and coolest metric shifter peg ever. Requires cutting off the OEM peg, drilling/tapping to 5/16-24 for installation. Info on installation can be seen HERE and HERE.
$15.19
BUY THIS ITEM (PHOTO)

#1665 SUPER-Shift peg (universal shifter peg) This monsta is 3-3/4" long! We use these in our shop for the beefiest and coolest metric shifter peg ever. Requires cutting off the OEM peg, drilling/tapping to 5/16-24 for installation. Info on installation can be seen HERE and HERE.
$15.94
BUY THIS ITEM (PHOTO)

#8857 (Brake Pedal cover) FITS:
SUZUKI: Boulevard C50 & C50T, 1500LC ('98-'04). Requires one hole drilled
$28.49
BUY THIS ITEM (PHOTO)

#8044 (universal brake pedal cover) We use these in our shop for a great looking and robust metric brake pedal cover, especially on applications where no cover of this type exists. Requires drilling one hole for installation. Will fit on most any pedal that is 2-3/8" wide x 1-3/4" tall or less. You can also trim the flat metal pad on the OEM brake pedal down to fit into the 2-3/8" wide x 1-3/4" tall recess on the bottom of this pedal cover, as we do on the Kawasaki Mean Streak. On textured and slightly curved pedals (like on the Honda VT-600 VLX), we use a grinder to flatten the face of the OEM pedal, than bolt this beauty on. A very universal part to work with! You can also see some info on installation HERE and HERE.
$28.49
BUY THIS ITEM (PHOTO)

#8851 (shifter peg cover) FITS:
SUZUKI: Volusia 800 (heel and toe shift), Boulevard M50/C50 Shifter, Marauder 800, Marauder 1600 Shifter peg cover
$16.14
BUY THIS ITEM

#81-112 (brake pedal cover) FITS:
SUZUKI: VZ1600 Marauder, M95
$37.95
BUY THIS ITEM