Marauder 800 "WideDrive" Belt Drive Conversion Kit w/Black Rear Pulley

Example of our beautifully designed Polished Aluminum rear pulley on a Marauder

Another shot of the rear pulley on a Marauder 800. Notice that the chain guard can still be mounted if desired.

Features of Scootworks NEW Marauder 800 WideDrive™ Belt Drive Kit:

• Available with a polished or black powder coated rear pulley.
• Custom designed black front pulley and hub assembly.
• New "WideDrive" MonstaBelt is ~1.20 inches (30mm) wide and uses the newest technology in high strength power transmission belting available.
• Lower highway RPM's with the 2.22:1 final drive ratio. This drive ratio has been tested extensively and works great at all speeds. The Marauder engine has plenty of torque to handle this drive ratio throughout the power bands.
• RPM's with our drive ratio is ~2750 @ 60 mph. RPM's with original sprocket combination is ~3800 @ 60 mph. Gives an approximate 28% reduction of engine RPM's at highway speeds! Feels like you have a 6th gear. No more of that highway 'buzzing' feeling like you have with your chain drive.
• No more cleaning of chain grease and grime from your rear wheel and tire. 
• No more of that nasty chain lubrication maintenance and routine chain adjustments. 
• Our belt drive is nearly silent, no more noisy chains.
• Kit includes custom built WideDrive front and rear pulley assemblies, MonstaBelt, belt tension gauge, and detailed installation instruction manual, making it an easy do-it-yourself modification for most bike owners (This is the easiest belt drive installation we have done yet!).

Scootworks strongly recommends that you use a tension gauge to correctly set the tension of your replacement belt. If you do not have a tension tester purchase one below.