|
Honda WideDrive™ Belt Drive Kit for the ACE/Spirit 750 To Select Your Proper Kit Version: Honda manufactures the ACE and Spirit 750 using two different sizes of shifter linkage rod. The only way to determine which linkage rod you have is to check it with a wrench. Use a 10mm and 12mm open end wrench to check the fit on the jam nut on the shifter linkage rod. This is the chrome rod that connects the shifter pedal to the transmission shifter rod. You can check it on either end...so the end up near your shifter pedal is the easiest place to do it, and you will not have to remove any covers on your bike (see the photo below). If the jam nut requires a 10mm wrench then you should purchase Kit #1 If the jam nut requires a 12mm
wrench then you should purchase Kit #2
The jam nut is located just behind the shifter footpeg, and in front of the kickstand pivot bolt.
|
