Scootworks Newsletter- February '07

Scootworks- Custom Accessories for Metric Motorcycles
Wow! The new year has just begun and the Scootworkers have been busy out in the development shop. It's been too cold to ride so we have been designing some new parts to make your ride even better! Check out the latest accessories from our designers and builders. 
You can also read about these and all of our new products everyday by going to the Scootworks blog at 
 OK, here we go....
- New Scootworks Intake Kit for VT-600 (VLX 600)
Scootworks has developed a new intake system for the Honda VLX 600
dual carb, years 1998 and OLDER. This has been a tough bike to get a
performance intake for, so we're now manufacturing small runs of
these. You can see this new intake online at:
http://www.scootwor shop/partsintake 600.htm
This comes fitted with a Hypercharger, and can be supplied with a
ProCharger or Pro-R Charger, for a nominal fee.

- New 750 Aero Risers ready to ship
Scootworks is now producing handlebar risers for the Aero 750. As a
result of your top triple tree angle, this kit will move your
factory handlebars up approximately 2", and back approximately 1-
7/8". This easy-to-install kit comes with everything needed, and is
an inexpensive boost for comfort on your Aero 750. This new part can
be seen on our Honda Handlebar Riser page at:
http://www.scootwor shop/partshonhan dle.htm

- New Handlebar Risers for Kawasaki Mean Streak, Suzuki Marauder & M95
Scootworks is producing a riser kit to fit the Kawasaki Vulcan Mean
Streak 1500 & Mean Streak 1600, and the Suzuki Marauder 1600 & M95.
This kit is compatible with the original factory handlebars, wiring
length, and hoses/cables. need to replace your bars and install
conventional risers and handlebar, just to get a bit more
comfortable. You can see these at the bottom of the page at:
http://www.scootwor shop/partskawhan dle.htm and
http://www.scootwor shop/partssuzhan dle.htm

- New Risers for VN2000
Scootworks now has a version of our PhatRisers™ for the Kawasaki
Vulcan VN2000 Classic and Classic LT (not for the LTD with the
fairing over the handlebar mount). These are available in Polished
billet, Gloss Black, and Chrome finish. We also have a handlebar
riser spacer for the VN2000 Classic and Classic LT OEM riser that
can be found a little closer to the bottom of the same page. You can
see these new parts at:
http://www.scootwor shop/partskawhan dle.htm

- Scootworks PhatRisers™ in Black Powdercoat!
Scootworks' PhatRisers™, PhatRisersII™ , and PhatRisersIII™ are now
available for all models in #3 Gloss Black Powdercoat (in addition
to Micro-polished billet and Show Chrome) finish. We have over
different 168 fitments of these, in house! You can find these for
your particular motorcycle by visiting www.scootworks. com ,
select "Shop Online", then choose your brand of motorcycle. All
PhatRiser™ versions are in the [Handlebar Risers for 1" bars]
catalog section for each motorcycle brand.
Inexpensively add comfort and style to your cruiser or touring bike
with PhatRisers™, manufactured exclusively by Scootworks !

- New Scootworks Suspension Components available...
Scootworks !Slammers!™ lowering kits are now completed and shipping for the
following bikes:

Suzuki - C50, M50, Volusia 800 (all models)

Yamaha - Vstar 1100, Vstar 1300

These lowering packages allow for lowering these motorcycles up to
3", in 1" increments. These are easy to install, and give your bike
a clean boulevard stance. Low is the law, and we help you abide!

- Front lowering kits for '07+ Spirit 750 now available
Scootworks has a new front lowering kit for the '07 Honda Spirit 750
(shaft drive version) available. This simple accessory can drop the
front of your '07+ Shaft drive Spirit 750 in 1" increments, from 1"
to 3". A perfect companion for our '07 Shaft Drive Spirit 750 rear
lowering kits. You can see these on the Honda suspension page at:
http://www.scootwor shop/partshonlow er.htm
- New Risers for Honda VTX-1300C
We have just released a new product for the Honda VTX-1300C. This is
a new Scootworks Handlebar Riser kit to inexpensively provide more
rise and pullback for your factory bars (yep, this works with your
OEM handlebars that have built-in riser stubs!). These are a snap to
install, and come with all hardware needed. You can see this new
product at:
http://www.scootwor shop/partshonhan dle.htm

- New Handlebar Risers for Kawasaki Vulcan 500 ('96+)
Scootworks has designed a set of our famous risers for the Kawasaki
Vulcan 500. This works with the OEM (factory) handlebars of the
500's built since 1996 and newer, without the need to replace your
handlebars! The kit is designed to perfectly match the contours and
fitments of your Vulcan 500, comes with everything needed for
installation, and is very easy to install without rerouting the
cables, wiring , or brake hose of your motorcycle. Polished to a
mirror finish, and is an inexpensive addition to your Vulcan 500 to
greatly improve the comfort of your bike. No more "burning between
the shoulders" or "upper back stress" associated with your handlebar

You can see this new product online at:
http://www.scootwor shop/partskawhan dle.htm

- New Vulcan 900 product released...
The new LoRidr 1"-3" adjustable lowering kit is now in full
production, online, and ready for sale. It's been in development for
a while, but is now a reality. Vulcan 900 owners can easily slam
their bike to 3 different levels with this new product. You'll find
it in the online catalog, under Kawasaki -> Lowering Kits.
You can see this new product online at:
http://www.scootwor shop/partskawlow er.htm

- New Vulcan 500 Exhaust for Kawasaki EN500, '96+!
Scootworks has now released a new exhaust package for the EN500
Kawasaki Vulcan. The new Scootworks Scorpion™ Exhaust fits the
Vulcan 500, 1996 and NEWER ('96+). This easy addition gives a nice,
deep, and louder exhaust sound to your Vulcan 500 Cruiser. You can
see this new exhaust system on our site at:
http://www.scootwor shop/partspipesk aw.htm

There's also a slideshow with more pics of our customized Vulcan
EN500 on our site in the 'Project Bikes' section at:
http://www.scootwor s/retailstore/ projects/ index.htm

- Vulcan 800 Sissybar BLOWOUT!
For a limited time, we have deeply discounted our Scorpion™ Sissybar
& Luggage rack combo for the Vulcan 800, as well as the TALL Easy
Rider Sissybar for the Vulcan 800. These backrests fit all years of
the Vulcan 800 Classic, and Vulcan 800 "A" (Custom). You can choose
either version for only $129.99, a huge markdown from our normal
pricing of these beautifully chromed pieces.

Visit www.scootworks. com and click the "Vulcan Sissybar Blowout"
link at the top of the page, or go directly to:
http://www.scootwor shop/partskawsis sy.htm
Now go to our website and buy these parts! You'll be glad you did, besides where else are you gonna spend that tax refund check?
If you wish to be removed from this mailing list, please send an email to with 'unsubscribe' in the subject field.