Lightbar Replacement Parts- Replacement lamp assemblies for lightbar replacements or custom lightbar assembly. Can also be purchased and used with our Clamshell mounts from the 'Mounting Hardware' section below.  

Driving Light Bar and Supporting Bar w/LED signals for Custom Applications

Kuryakyn Driving Light Bar- This is one COOL lightbar. It does not come with mounts for any specific motorcycle, and is for custom installation. Fabrication of mounting bracket is required (see custom installation in photo on left). Has built-in LED signals below the silver bullet halogen lamps. Note: This Light Bar is compatible with most windshields, but does not fit with Memphis Fats in most installations.

PIAA Fork Mounted Driving LIghts (set)

Kuryakyn 5001 PIAA Fork Mounted Driving LIghts (set)- These complete fork mounted driving light sets utilize the PIAA Xtreme White lighting technology, and really light up the road! Complete with beautiful chrome housings, mounting brackets, wiring harness, remote switch...everything you need for installation on your favorite cruiser!

20 Watt Large Silver Bullets


Bezels for 20 Watt Large Silver Bullets


[BB] 50 watt Halogen


[BB] 25 watt Halogen marker/signals

Halogen Driving lights, halogen signals, and halogen marker lights -  'Homebrew' your own custom driving, fog, signal, and/or marker light package with these versatile components. These lights can be easily coupled with the Clamshell, P-Clamp, or 2-piece Fork Mounts found below on this page, for attachment to your crashbar, highway pegs, engine guard, handlebars, saddlebag guards, etc...your imagination is the only limit! The #2319 has a solid 5/16" mounting stud (not-hollow) and wiring exiting through the rear of the shell, just behind the mounting bolt. The #2320 has wiring exiting through the hollow 3/8" mounting bolt for hidden wiring applications.

Next, check out these cool matching Visors available for the 20 Watt Large Halogen lamps (only). Top mount, left and right side mount, and bottom mount visors allow for installation of visors on the driving lights in most any position.

Hollow Mounting Stud for concealed wiring




P-Clamp Style Mount




Clamshell type mounting




Two-Piece Fork Mount

Mounting Hardware, clamps, and Custom Mounts for Lights and Signals - These mounting products can be combined with the various lights, mini-signals, spots, etc. on this page for installation on your bike.

Before you order, read these notes to help with your selection of mounting hardware:

- The Hollow Stud Mounting kits allow installation via fender rail bolts, where the wire is totally concealed within the light and mount. The hollow mounting stud replaces the rear fender rail bolt, and provides a threaded stem for the light to attach. The wire passes through the center of the stud and under the fender, completely invisible from the outside. These are available in two sizes: 8mm diameter mounts, and 10mm diameter mounts. This will allow adaptation of these lights to all Victory motorcycle models. Check your rear fender rail bolt size (diameter of the bolt SHAFT will be either 8mm or 10mm, not the size of the bolt head) before ordering.

- The P-clamp Mounting kits allows the installation of lights on un-shrouded front forks, etc. Note that the P-Clamp mounts may require the mounting hole to be enlarged with a drill, depending on the light attachment hardware.

- Clamshell Mounts are a very universal mounting method, and accomodate nearly every type of light. They are a bit more robust, and a good choice when attaching large spotlights, 50 watt Halogen lamps, etc.

- Two-Piece Fork Mounts are best for applications where the wiring exits the light housing, not from within a hollow mounting stud.

- Most OEM Engine Guards are 1-1/4" diameter.

- The 1" diameter clamp makes a great 1" handlebar mount for speakers, tachometers, GPS, etc.

- Aftermarket Cobra, MC Enterprises, and Linby engine guards are 1-1/4" diameter.

- Most frame down tubes are 1-1/4" in diameter.

Rainbow Strobe Prism

Headlight/Spotlight Visors