|
#8309 Vented Chrome
Flush Mount Gas Cap
These slick flush mount gas caps
have the high-tech look of aviation-style fuel fillers. The built in trim ring protects the
painted surface around the filler opening from dings and gas stains. A keyed entry system
permits their ultra thin profile and prevents tampering. This is a vented cap.
Fits: 'All '82-'08 H-D tanks. - $59.99
BUY
THIS ITEM
(photo)
|
|
|
#8200 Phantom Covers, Chrome (pr)
Cover up the unsightly axle nuts,
adjusters, etc. All hardware and instructions are included. They take only a few minutes to
install.
Fits: All ‘86-’07 Softails models (ex. ’00-’07 FLSTF, FXSTD; ‘05-‘07 FLSTN; ‘06-’07 FXST,
FXSTB, FXSTC, FXSTS)
Note: Will fit ‘00-’06 FLSTF, ‘00-’07 FXSTD, or ‘05-’07 FLSTN if stock exhaust has been
removed and replaced by a staggered dual or 2-1 system
- $79.99
BUY
THIS ITEM
(photo)
|
|
|
#8239 Mid-frame covers
Create a smoother, creamier look by
concealing unsightly frame welds with this luscious, chrome-plated steel cover. Installs easily
in just a matter of minutes.
Fits: '08 Dressers, Road Kings, Road Glide and Street Glide
- $109.99
BUY
THIS ITEM
(photo)
|
|
|
#2017 Chrome
Clutch Cable Adjuster Cover
Here is a classy
cover to hide the crude, zinc plated cable adjuster. It's simple, two
piece design encapsulates the threaded adjuster. It installs in
moments with easy to handle spring clips and can be removed just as
quickly should you need to adjust your cable. Fits: 'All ’87-’05 H-D Models with
Stock Cables and most Steel Braided Cables .355 in Diameter or Less.
- $41.99
BUY
THIS ITEM |
|
 |
#2024 Chrome Clutch Cable Ferrule Accent
This is an easy to
install trim cover for the clutch cable where it enters the transmission or
primary cover. Fits clutch cables on '87-'99 Big Twin and '91-'05 XL's - $19.99
BUY THIS ITEM
(photo)
|
|

Universal Kickstand Extension
|
Universal Chrome Kickstand Extension
This is a part that has been requested
by lots of 'vertically challenged' riders, and now we have it! Makes reaching the kickstand from
a seated position much easier for shorter riders. Easily installed... flip
the kickstand up, place the extension in a place that clears the engine, mark the hole,
flip the stand down, drill one hole and install. Below are links to pics of it in a generic
application.
|
|
Louvered & V-Style Reflector Grilles
Kuryakyn Reflector Grilles
|
Louvered and V-Style Reflector Grilles
These Louvered and V-Style Side Reflector Grilles
are a two piece universal ABS chrome grille set. Fits 3-1/4" x 1-1/4" side reflectors.
#2-156A Louvered Chrome Reflector Grilles - $DISCONTIN (pair)
BUY
THIS ITEM
(photo)
|
#53-112 V-Style Chrome Reflector Grilles - $12.95 (pair)
BUY
THIS ITEM
(photo)
|
-> # 9001 Chrome Reflector Covers.
Fits: Motorcycles with reflectors that are 3-5/16” by 1-1/4” or smaller with 1/4” of clearance
around the reflector. - $19.99 (pair)
BUY
THIS ITEM
(photo)
|
-> # 9002 Chrome Reflector Covers.
Fits: Motorcycles with
reflectors that are 3-1/2” by 1-3/8” or smaller with 1/4” of clearance around the reflector.
- $19.99 (pair)
BUY
THIS ITEM
(photo)
|
|
|
|
Chrome
Flame Accents- Chrome plated laser cut steel FLAME
accents. Easily attached with 'gorilla' adhesive tape, and WILL NOT fall off!
|

#8127 Horn Cover

3-1/2" & 3-1/4" Horn Covers
|
Horn Covers-
Cool horn covers to fit a miltitude of bikes. These covers
install easily, and add a touch of sparkle to your otherwise drab horn!
-> #7715 V-Shield kit. This kit
works on H-D Big Twins (carbureted and injected) ’92-’05, as long as the stock
horn is located between the cylinders. Also comes with some adapters and linkages
for other fitment. - $69.99
BUY
THIS ITEM
(installation instructions)
|
-> 3-1/2" Slotted
Horn Cover (BBP). Fits 3-1/2" round horns. $10.95
BUY THIS ITEM
(PHOTO)
|
-> 3-1/4" V-Twin
Horn Cover (BBP). Fits 3-1/4" round horns. $14.95
BUY THIS ITEM
(PHOTO)
|
|

Universal Visors by 'Who Did It'
|
Meter/Instrument Visors -
The visors pictured by 'Who Did It, Inc.' are
an attractive chrome visor that easily affixes to the instruments of several cruisers. Besides
the sleek appearance, you'll really appreciate the reduction in glare with these visors
installed! -
|
-> #4015 Universal Visor (Who Did It). Fits instruments of 3 3/4" diameter with
at least 7/16" of exposed sidewall. Fits Road Glides, '04-'05 Sportster Customs,
Victory Vegas & King Pin, and many other bikes. - $26.99
BUY THIS ITEM
|
-> #4016 Universal Visor (Who Did It). Fits instruments of 3 1/4" diameter with
at least 1/8" of exposed sidewall - $25.99
BUY THIS ITEM
|
|