Universal Windshields for 1" Handlebars! -These
cool windshields are just the ticket for a trim, clean look. Easy to install with awesome
HEAVY-DUTY chrome plated hardware for that show quality look. Fits bikes with 1" handlebars, adjusts
for riser widths of all cruisers. Available in two heights.. 15" and 18". Complete with all hardware
needed for installation, and a well detailed instruction page (the diagram can be seen in the photo links
below). The windshield lens is of thick construction to provide years of service without cracking.
Adjustable Windshields for Select Harley-Davidson motorcycles-Our Classic Cruiser Windshields are made in the USA, and
constructed of 3/16" LuciteŽ acrylic. Sometimes called wind screens, fly
screens, bug screens, etc,
these wind shields are very durable, resistant to breakage and cracks, easily
cleaned, and adjustable in height and angle. Available in 17" or 22" height. All brackets and
trim are chrome plated, and chrome bolts / washers / acorn nuts are supplied to compliment the
hardware package. Choose from Clear or Tinted. Check out our prices...these high
are the best deal going! (Note: 17" windshields are 17" tall from the top of the headlight, to the
top of the windshield. 22" windshields are 22" tall from the top of the headlight to the
top of the windshield.)
Windshields for Harley-Davidson
Dyna Superglide, Dyna Low Rider, Dyna Wide Glide, Softail Custom, Sportster Custom, 883 Hugger,
and any other model with 39 or 41mm unshrouded front forks.
#MEM-series Front Fork Deflectors/Lowers shown on shrouded fork legs
Windshield Lowers -Acrylic fork deflector panels
mount to each fork with a clamp that incorporates the familiar fluted design commonly used
with many motorcycle accessories. Some available in Clear or Smoke.
#MEM-9884 Front Fork Deflectors /
Windshield Lowers combo in Clear or Black (pair) for 35mm-43mm diameter unshrouded forks.
- $81.99 BUY CLEAR BUY BLACK
#MEM-9891 Front Fork Deflectors /
Windshield Lowers combo in Clear or Black (pair) for 69mm-75mm diameter (2-3/4" - 3" dia.) shrouded forks.
- $81.99 BUY CLEAR BUY BLACK
PolarHands to provide a windbreak and help keep your hands WARM!
Handlebar Chaps shown installed. Install easily with velcro
closures. Fits all known Cruisers, Touring bikes, and Sport Bikes.
Shown here with hand in PolarHands, nice and warm! Plenty of
room for lever and throttle control. Hand removes easily without hinderance.
Handlebar Chaps for
Cruisers and Touring bikes -
Keep your hands out of the chilling
blast of wind this winter with PolarHands! These handlebar chaps provide a barrier from the wind,
much like the protection afforded by the fairing on touring bikes. The insulated inner liner helps hold the warmth of your
hands inside, while allowing full movement of your fingers on the controls. No more large bulky
gloves that cause you to loose mobility and make controlling your bike difficult.
Most riders that use these wind protectors find that they can wear only a pair of thin summer gloves
for riding in cold weather. An average thickness riding glove should allow you to ride comfortably in the cold
weather! Get a set of PolarHands for yourself or a friend this winter, they'll bring back the joy of riding in cold weather!
Polar Hands have a velcro opening in top and bottom to facilitate installation around mirrors,
drink holders, and even bottom mounted turn signals. They also have a velcro strap around the
handlebars to keep out the blast of cold air from around the bars. The opening for your hands is
large to allow hands to be easily place in, and allow plenty of free space for your levers and