Scootworks Deluxe Chaps shown on 1998 Kawasaki 800 Classic with Highway Pegs turned
inward and helmet lock exposed. These chaps fit over most crashbar mounted accessories.
Scootworks Deluxe Chaps shown on 1999 Kawasaki 800 Classic with Highway Pegs and extensions.
Scootworks Deluxe Chaps shown on 1999 Honda 1100 Aero with Cobra Bar and dual helmet locks.
Notice how the chaps conform to the shape of the helmet locks, and still allow access to the lock through the side opening. This photo was taken
to demonstrate the amount of protection from road spray and cold wind the rider
receives.
Hopnel Pac-A-Derm Engine Guard Chaps with pouch for select motorcycle
fitments.
At long last... Scootworks Deluxe Chaps for the Sabre and Spirit
1100! These bike pose a special challenge due to a combination of engine guard shape,
interaction with the exhaust system, and horn/brake pedal brackets. This is a shot of the
Scootworks Chaps on the LH side of the bike...
...and a shot of the Scootworks Chaps on the RH side of the
bike. Now, Spirit and Sabre 1100 riders can keep warmer and dryer while riding on wet
roadways and during winter months!
Scootworks Deluxe Chaps shown on 2000 Kawasaki Drifter with the OEM engine guard
by Fire and Steel. Notice the protection immediately in front of the driver's
floorboards. This protects the feet and lower legs from road spray and blocks
the cold winter wind!
Scootworks Deluxe Chaps shown on
1997 Honda VLX Deluxe with OEM (Hondaline) engine guard. They keep the cold air from blasting on your
legs
during cold weather months, thus helping to extend your riding season.
Scootworks Deluxe Chaps shown on
a new Yamaha V-Star 1300 Tourer with the factory Yamaha engine guard. Nice fit, and plenty of rom for hiway pegs!
Crash Bar Chaps for
Select Metric Cruisers-
Stay dryer in rain and on damp roads, and warmer during the winter riding season, with these premium accessories. These
"soft lowers" are among the best accessories for riding in adverse weather.
Fabricated from durable 'leather-like' material, they have the look and texture of leather, but without the maintenance of real leather.
These chaps slip on and off in a matter of seconds, and are easily stored in your saddlebags or can simply be left
installed. Be sure to click on the 'Description' of each design, and compare to others selling for much more!
Check the list below for the models available now. Don't see your
bike/crash bar listed? Let us know at
sales@scootworks.com. We have several other models in development
for Honda, Suzuki, and Yamaha at this
time.
*
Hopnel Pac-A-Derm Chaps for Honda 750 Aero/Spirit C2 (Shaft Driven) w/Show Chrome 53-434 Crashbar - $107.96
BUY THIS ITEM(photo)
***VT-1100***
*
Scootworks Deluxe Chaps for Honda 1100 Aero/Ace w/Cobra Boulevard Crashbar
(currently available only for Aero
with aftermarket pipes; does not fit with Aero factory 2-into-1 pipes.)
- $80.00
BUY THIS ITEM(description)(instructions)
*
Scootworks Deluxe Chaps for Honda 1100 Aero/Ace w/Hondaline (OEM) Crashbar
(currently available only for Aero
with aftermarket pipes; does not fit with Aero factory 2-into-1 pipes.)
- $80.00
BUY THIS ITEM(description)(instructions)
PolarHands to provide a windbreak and help keep your hands WARM!
Handlebar Chaps shown installed. Install easily with velcro
closures. Fits all known Cruisers, Touring bikes, and Sport Bikes.
Shown here with hand in PolarHands, nice and warm! Plenty of
room for lever and throttle control. Hand removes easily without hinderance.
Handlebar Chaps for
Cruisers and Touring bikes -
Keep your hands out of the chilling
blast of wind this winter with PolarHands! These handlebar chaps provide a barrier from the wind,
much like the protection afforded by the fairing on touring bikes. The insulated inner liner helps hold the warmth of your
hands inside, while allowing full movement of your fingers on the controls. No more large bulky
gloves that cause you to loose mobility and make controlling your bike difficult.
Most riders that use these wind protectors find that they can wear only a pair of thin summer gloves
for riding in cold weather. An average thickness riding glove should allow you to ride comfortably in the cold
weather! Get a set of PolarHands for yourself or a friend this winter, they'll bring back the joy of riding in cold weather!
Polar Hands have a velcro opening in top and bottom to facilitate installation around mirrors,
drink holders, and even bottom mounted turn signals. They also have a velcro strap around the
handlebars to keep out the blast of cold air from around the bars. The opening for your hands is
large to allow hands to be easily place in, and allow plenty of free space for your levers and
finger movement.
*Scootworks products are protected by patent pending,
US/International patents, and/or intellectual property rights. Reproduction without
express written permission from Scootworks is forbidden and will be prosecuted to the fullest
extent of the law.
<- VISIT
