Lighting Control Electronics- These kits are
those most used by Scootworks in custom installations in our own Service Department and
Custom Bike Shop, and are highly recomended by us.
-> #2328 Wiring and Relay
Kit - When using
Halogen Silver Bullets as additional driving lights (or any 50+ watt driving lamps, for that matter),
recommend wiring them separately to avoid overloading the
headlight circuit. Our kit provides you with a switch, relay,
universal wiring harness and general instructions for
installation. The kit is not intended for any particular
application, but is easily adaptable to any motorcycle.
- $49.99 BUY
-> #4710 Universal Run-Turn-Brake Controller - $89.99 This slick little module
will convert single filament (1156-style) rear lamps from only blinkers to run lights, aux. brake lights, and turn signals. It also has a built-in brake light modulator that will flash the
brake lights 5 times, then turn solid, when brakes are applied. The brake light modulator is also easily disabled, if not desired. The module can also be wired to only serve as Turn-Run lights, by simply
leaving the brake input disconnected. A heck of a deal for all of these features! BUY THIS ITEMInstallation Instructions(photo)
-> #4610 Plug-N-Play Run-Turn-Brake Controller, Honda - $89.99 Same
as #4710 above, except Plug-N-Play for Honda VTX 1300 ('06+), VTX 1800 C ('05+), VTX 1800 R/S ('04+) BUY THIS ITEM(photo)
-> #4611 Plug-N-Play Run-Turn-Brake Controller, Honda - $89.99 Same
as #4710 above, except Plug-N-Play for Honda Ace 750 ('02-'03), VTX 1300 (all models, '03-'05), VTX 1800 R/S ('02-'03), VTX 1800 C ('04) BUY THIS ITEM(photo)
-> #4612 Plug-N-Play Run-Turn-Brake Controller, Yamaha - $89.99 Same
as #4710 above, except Plug-N-Play for Yamaha V-Star 650 ('04+), V-Star 1100 ('04+), V-Star 1300, Road Star 1700 ('04+) [except Warrior] BUY THIS ITEM(photo)
-> #4613 Plug-N-Play Run-Turn-Brake Controller, Yamaha - $DISCONTINU Same
as #4710 above, except Plug-N-Play for Yamaha V-Star 650 ('99-'03), V-Star 1100 ('99-'03), Road Star 1600 ('99-'03) [except Warrior] BUY THIS ITEM(photo)
-> #4859 Run-Turn-Brake module w/pulse brake. - $89.99
Direct plug-in for: ’96-’08 Softails; ’97-’08 Dynas, Dressers, Road Kings; and ’99-’03 Sportsters. Important: P/N 4859 is not compatible with aftermarket or accessory modules that alter the functions of the stock taillight and turn signals. If you have already made modifications to your bikes taillight and/or turn signals, you will have to return your bike to stock form before installing our Controller.
Bikes equipped with factory security system and low-draw L.E.D. lights also require P/N 4857 - Alarm Compatible Load Equalizer. BUY THIS ITEM(photo)
-> #13-307 LED Conversion Harness - $8.96
Here's a neat way to convert OEM turn signals to LED without losing the dual
functionality of the lights on Honda motorcycles. This LED Dual Conversion Harness
allows LED Marker Lights to operate as running and turn signal lightsOne harness is
needed for each individual light. This item is not required with Show Chrome
Accessories® Conversion Kits. BUY THIS ITEM(photo)
-> #4810 Load Equalizer - $18.99 This module
is often required to correct flasher blink rates, when installing L.E.D. lighting on your bike. Easily installed, and complete
with everything you need...including instructions! BUY THIS ITEMInstallation Instructions(photo)
-> #16-28 Illuminated Rocker Switch - $2.66
This simple hole-mount rocker switch is illuminated when 'on', and easily mounted through steering head covers, side covers, or other body trim. The contacts are rated for 10 amps, while
the illumination circuit requires 12 vdc. A great way to control loads up to 120 watts. BUY THIS ITEM(photo)
Add LED signal lights to your bike to reduce load, and correct the flash without adding extra load through
-> #13-306 Electronic Signal Light Flasher - $23.36 This module
is an electronic signal light flasher, and the most efficient way of correcting signal light flash rates on
Honda cruisers when LED turn signals have been installed. Plug-n-play on Honda cruisers! BUY THIS ITEM(photo)
-> #13-305 Universal Electronic Signal Light Flasher - $49.95 This module
is a universal electronic signal light flasher, easily added to most all motorcycles. Replaces the mechanical
flasher on your bike. BUY THIS ITEM(photo)
Light Switch- This unique switch fits
right on your motorcycle handlebar and can be used to turn your light
bar lights (or other auxiliary lights) on and off independently from
your hi or low beam light switch. The switch is a single pole switch and
manufactured of billet aluminum with a mirror finish. Available with 1 or 2 switches.
Scootworks Aux Switch, Reservoir/Clutch Perch Mounted
Scootworks New Auxiliary
Light Switch for Reservoir or Clutch Perch Mount- This cool switch
installs on your Front Brake Reservoir mount, for an easy addition of electrical control for
aux. devices like light bars, decorative lighting, etc. Can also be installed on the
Clutch Perch mount of many motorcycles. Fits Honda and Yamaha motorcycles, and other bikes
with 1-3/8" bolt spacing. Beautiful mirror finish! Used to switch your light
bar lighting (or other auxiliary lights) 'on' and 'off' independently from
your hi or low beam light switch. The switch is a single pole switch, rated at 140 watts
continuous, and comes complete with weatherproof boot. New stainless steel bolts, spacers, and
everything needed to install this switch on your bars is included.
# 13-207 Dual Aux Switch Kit- This dual switch unit boasts
a heavy cast aluminum housing, two pushbutton switches, dual LED indicators, and can be mounted on
the left or right side of standard 1" diameter handlebars.
Master Cylinder Switchbox for H-D. 2 switches
w/black powder coat finish. Replaces OEM reservoir cover. FITS: H-D RH brake reservoir on
years '82+. Comes with all needed hardware for mounting. $49.95 BUY
Smart Switch- Works
with your headlight hi-lo beam switch. you can hide the smart switch
anywhere on your bike to control any auxiliary light.
on your hi-lo switch, auxiliary lights may be on or off with either
hi beam or low beam on or off.
Requires only a 4
wire connection inside your headlight shell. Instructions included.
Back-Off Module- Brake
light modulator. The Back Off signal consists of three short light pulses followed by one long
pulse (Cycle time approximately 6 seconds), then recycles. Really gets the attention of
those behind you. Easily installs, only two wires to connect!