Used by H-D, Triumph, Moto Guzzi, and many older cruisers
What is the difference between
MicroPolished and Chrome Plated PhatRisers™ ??
Read this FIRST before you buy...
...it could save you some money! Our micro-polished PhatRisers
rival chrome in looks, and far outlasts chrome on aluminum billet. For many years, we only
manufactured these in micro-polish, and would often receive messages from customers like "what
a beautiful chrome finish", "I can't tell the difference between your micro-polish and my
chrome parts", etc. Micro-polish has a mirror polish without the microscopic crevices that
detract from reflectivity of typical polished aluminum. Since it's not a plating like chrome,
it'll never chip or peel. It is also less expensive to you as a purchased item. Chrome _never_
has an infinite life when applied over aluminum (as opposed to steel parts), like on risers,
wheels, levers, etc.
NEW! PhatRisers™ for 7/8" bars PhatRisers™ w/hardware PhatRisers™ disassembled
NEW! PhatRisers™ & PhatRisers II™ in BLACK for 7/8" bars Black PhatRisers™ w/hardware
PhatRiser™ and PhatRiser II™ for 7/8" Handlebars by Scootworks-
These handlebar risers were kitted especially for motorcycles
with 7/8" diameter handlebars like Triumph, Moto Guzzi, and many of the older cruisers. Put
your hands and shoulders in a more comfortable location by
raising the bars 1.5" and putting your grip point 2" closer to you with the PhatRisers,
or raise the bars 2" and pull your grips back 3" with the PhatRiser II's. CAD
designed, FEPro tested, CNC machined from T6 (6061) billet to Scootworks' strict specifications,
and micro-polished to a beautiful mirror finish by local craftsmen for Scootworks. Our POLISHED risers w
ill _NEVER_ blister, peel, or rust (one of the benefits of polished billet)...we
guarantee it!!!
A beautifully simple design, yet extremely robust...weighing in at over 1.35 pounds each for the
PhatRiser™, and 1.6 pounds each for the PhatRiser II™. We even supply samples of the premium
polish for billet on the planet....Luster Pad! At these prices, these heavy-duty custom built
billet risers are the best deal on the planet!
Both versions have the handlebar bore offset 1 1/4" from vertical. PhatRiser™ is approximately
4" x 1.25", the PhatRiser II™ is approximately 5.5" x 1.25". The dimensions of the base footprint
of these beefy risers is 1 1/2" wide by 1 5/8" deep. Click
HERE
to see a better closeup and comparison of the dimensions.
First, choose the riser model you want below, then select the hardware kit you think is best for
your custom application. Drop us a note at
support@scootworks.com
and let us know what you fitted these risers to. We manufactured these because people kept asking
for risers for 7/8" handlebars. Since we don't see many bikes in our shop with 7/8" bars, we'd
love to compile a fitment list from our users so as to help others like you! Also, don't hesitate
to let us know if you need different hardware for your specific application.
KNOWN FITMENT THUS FAR:
- Triumph 900 Speed Triple (hardware kit #10)
- Most Moto Guzzi with 7/8" handlebars (hardware kit #10)
- Honda 750 Nighthawk with handlebars (hardware kit #4 & #7)
-> NEW <- PhatRisers™ & PhatRiser II's™ are now available
for 7/8" handlebars in #4 GLOSS BLACK POWDER COAT! Simply choose 'BUY BLACK' when you choose below...
Please note that some applications may require
the purchase and installation of cables and hoses, or rerouting of your cables and/or hoses
_BEHIND_ the triple tree. Since this is a custom application, you must make these decisions on
your part.
-> Hardware Kit #1 - Comes with a pair of m10 x 1.5 x 45mm socket head bolts for
offset mounting through 10mm holes in triple tree, a pair of 10mm x 45mm studs for central mounting
through 10mm holes in triple tree, washers - $16.00
BUY
THIS ITEM
-> Hardware Kit #2 - Comes with a pair of m12 x 1.75 x 50mm socket head bolts for
mounting through 12mm holes in triple tree, washers - $10.00
BUY
THIS ITEM
-> Hardware Kit #4 - Comes with a pair of m12 x 1.75 x 70mm socket head bolts for
mounting through 12mm holes in triple tree, washers - $12.00
BUY
THIS ITEM
-> Hardware Kit #6 - Comes with a pair of m12 x 1.75 x 60mm socket head bolts for
mounting through 12mm holes in triple tree, a pair of m12 x 1.75 x 30mm socket head bolts for
mounting through 12mm holes in triple tree, washers - $12.00
BUY
THIS ITEM
-> Hardware Kit #7 - A pair of tubular spacers
designed to fit up into the base of the riser and down into a rubber mount cavity in some triple trees
to help provide stability in rubber mount applications. Works in rubber mount cavities 7/8" I.D.
or greater. - $8.00 (pair)
BUY
THIS ITEM
-> Hardware Kit #8 - Comes with a pair of m14 x 2.0 x 65mm studs for
mounting through 14mm holes in triple tree, washers - $16.00
BUY
THIS ITEM
-> Hardware Kit #10 - Comes with a pair of m10 x 1.25 x 85mm studs for
mounting through 10mm holes in triple tree, washers - $16.00
BUY
THIS ITEM
-> Hardware Kit #12 - Comes with a pair of 7/8" I.D. x 1" O.D. split
handlebar adapters for installing 7/8" handlebars into 1" risers. Can also be used to adapt 1" lighting clamps onto
7/8" tubular structures - $10.00
BUY
THIS ITEM
Scootworks 'Classic' Yamaha Virago Riser Kit
Scootworks 'Round' Yamaha Virago Riser Kit
Yamaha VIRAGO Handlebar Risers!! -
Finally, Yamaha Virago riders can easily add risers to ALL Yamaha Virago models.
Scootworks has developed and tested riser kit to raise the Yamaha Virago bars up approximately 2", and provide
1-3/4" pullback from the sock riser location. An easy way to add comfort to your Yamaha Virago without the hassles of
replacing handlebars! NOTE* Read the instructions below...
-> 'Round' 133-Series Risers for Yamaha Virago (all models) - $139.99
Raises the handlebar 2", moves your grip
point 1 3/4" closer to you. BUY
THIS ITEM(photo 1)(instructions)
*Scootworks products are protected by patent pending,
US/International patents, and/or intellectual property rights. Reproduction without
express written permission from Scootworks is forbidden and will be prosecuted to the fullest
extent of the law.