What is the difference between
MicroPolished and Chrome Plated PhatRisers™ ??
Read this FIRST before you buy...
...it could save you some money! Our micro-polished PhatRisers
rival chrome in looks, and far outlasts chrome on aluminum billet. For many years, we only
manufactured these in micro-polish, and would often receive messages from customers like "what
a beautiful chrome finish", "I can't tell the difference between your micro-polish and my
chrome parts", etc. Micro-polish has a mirror polish without the microscopic crevices that
detract from reflectivity of typical polished aluminum. Since it's not a plating like chrome,
it'll never chip or peel. It is also less expensive to you as a purchased item. Chrome _never_
has an infinite life when applied over aluminum (as opposed to steel parts), like on risers,
wheels, levers, etc.
PhatRisers™ by Scootworks-
Now also available in Black, SHOW CHROME, and engraved with Flames! -
These
handlebar risers were created especially for Honda motorcycles. Put your hands and shoulders in a more
comfortable location by raising the bars 1.5" and putting your grip point 2"
closer to you. Works with original cables/hoses (in most installations), but may require you to
reroute them behind the triple tree in some applications.
Beautiful polished finish!! They come with their own upper handlebar
clamps for mounting, and do not require any drilling of the triple
trees! A direct bolt-on accessory for your bike.
Check out these pics of the new Flamed Phatrisers™
(these pics were taken while still sealed in plastic):
(photo)(photo)
CNC machined from T6 6061
billet, and hand micro-polished
to a beautiful mirror finish by Scootworks. Our POLISHED risers w
ill _NEVER_ blister, peel, or rust (one of the benefits of polished billet)...we
guarantee it!!!
All hardware is included to mount the risers to your bike, and to attach the handlebars. CAD designed, FEPro tested, and CNC machined from T6
(6061) billet to
Scootworks' strict specifications, specially designed to work with your Honda motorcycle. A beautifully simple
design, yet extremely robust...weighing in at over 1.35 pounds each. Starting at
$119.95,
these heavy-duty custom built billet risers and hardware are the best deal on the planet!
Please note that VT1100 and
Sabre applications may require the purchase and installation of 2"-longer
cables and lines (though rerouting _BEHIND_ the triple tree is usually sufficient). Standard PhatRisers are shorter than stock for the VTX-1800 F/N.
Honda VLX prior to 1994 with risers built into handlebars may
require new 1" handlebars to work correctly with risers.
Prices are: $119.95 (Micro-Polished), $119.95 ( black), $149.95 (Show Chrome), $159.95 (Flames)
PhatRisers SWR-24 for Honda VT-1100 Ace, Spirit, & Shadow
PhatRisers II™ by Scootworks-
Now also available in Black and SHOW CHROME! -
These
handlebar risers were created especially for 'vertically challenged'
riders and folks who just want _more_ pullback!
Raises the bars 2" above that of the OEM Honda mount, and pulls your
grips back 3"
closer to you. Works with original cables/hoses (except as noted for the
PhatRisers™ above), but requires you to
reroute them behind the triple tree in some applications. PERFECT
for riders with short arms or being 5'5" or shorter. Weighing in
at over 1.6 lbs each, these hefty risers come with the
same great features as our PhatRisers™ above, and are available now!
Prices are: $129.95 (Micro-Polished), $129.95 ( black), $154.95 (Show Chrome), $164.95 (Flames)
- Check out these pics of the new Flamed Phatrisers™ in Chrome
(these pics were taken while still sealed in plastic):
(photo)(photo)
PhatRisers III™ by Scootworks- These
handlebar risers were originally created for the VT-750 Spirit, then everyone else wanted them!
These raise the bars 1 3/4" above that of the OEM Honda 750 Spirit mount, and pulls your
grips back 2.5" closer to you. Usually works with original cables/hoses on the Spirit 750,
but requires you to reroute them behind the triple tree. For all other
applications, we recommend 4" over length cables and hoses. These can be found on our
Cables and Hoses Page.
These risers are the biggest, fattest risers we manufacture. Weighing in at 2 lbs. per riser,
these babies are PHAT! Check out these additional pics:
(photo 1)(photo 2)(photo 3)(photo 4)
Prices are: $144.95 (Micro-Polished), $144.95 ( black), $174.95 (CHROME), $154.95 (FLAMED)
-> For VT1100 Shadow, 1100 Shadow Ace, and Spirit 1100- See the VT1100 Shadow and Spirit Risers 3 Sections Down This Page!
-> PhatRisers III™ for VTX 1300 Retro, S, N, & T. The VTX-1300C/Custom requires handlebar replacement, or our new 1300C Riser kit found further down this page -
BUY
POLISHEDBUY
BLACKBUY
CHROMEBUY
FLAMED
PhatRisers III on a 750 Spirit with stock cables/hose
!!NEW!! PhatRisers III-X™ by Scootworks- These
handlebar risers were originally created for a VTX-1300R/S rider with a
shoulder injury and were so well received that we decided to release
them to the general public. These new PhatRiser 3-X risers raise your
bar 2" and have a pullback of 5" to get it way back to you. They also work on the Honda 750
Spirit, and 750 Aero.
PhatRisers III-x on a 1300R with stock cables/hose
Pullback Risers for the VTX1800C! -
Looking for more comfort in your riding position? Try these 6" CNC machined,
custom billet aluminum risers for your VTX. They bolt on easily and are made
to accept the stock speedo housing. To install them simply unbolt the stock
risers from below the triple tree and unscrew the four allen head bolts from
the speedo housing on the top. Install these risers using the bolt kit we
provide and replace the stock speedo housing using the stock bolts.
The 6" risers are polished aluminum to match the stock housing. The pullback
is 1 1/2" and raises the handle bars 1 1/8" up. Stock control cables and
wiring will work fine.
-> Pullback risers for the VTX1800C- $144.95
BUY
THIS ITEM
PhatRisers for the Honda VT1100 Ace, Spirit, Shadow, & Tourer! -
Scootworks has developed a PhatRiser especially for the VT-1100's... They are perfect for the Ace, Ace Tourer, Spirit, and Shadows with the speedometer
cluster and indicators mounted on the top of the triple tree. We designed these to provide the proper clearance for the
instrument cluster, cluster mounting brackets, the Honda insignia, and the rear edge of the tree. PhatRiser looks and strength,
yet custom fitted to this famous line of Honda VT-1100's
These Phatrisers provide approximately 2" of additional pullback over the stock risers, and work with the stock
hoses and cables...no rerouting required! Complete with mounting hardware & and instructions. Click the link below to see more pics and order your new
PhatRiser 1H risers today!
-> Pullback risers for the Honda VT1100 Ace, Spirit, Shadow, & Tourer - $119.95
BUY
THIS ITEM
Scootworks Riser Kit For Honda Aero 750, '07 and earlier-
This custom designed riser package works perfectly with the built-in riser stems of your
factory Aero 750 bars! No need to replace handlebars to use risers and get more rise and pullback
for your Aero 750, simply install our kit on your bars for increased comfort. As a result of your
top triple tree angle, this kit provides
approximately 2" rise and an additional 1-7/8" of pullback for your factory bars. Easy to
install, supplied with all hardware needed for installation, and polished to a mirror finish.
This simple riser extension goes under your OEM handlebar mount, and provides approximately
1-5/8" rise and 1-3/8" additional pullback. Simple to install, and are an inexpensive way to add
comfort to your handlebars.
This custom designed riser package works perfectly with the built-in riser stems of your
factory VTX-1300C bars! No need to replace handlebars to use risers and get more rise and pullback
for your VTX-1300C, simply install our kit on your bars for increased comfort. This kit provides
approximately 1-3/4" rise and an additional 1-1/2" of pullback for your factory bars. Easy to
install, supplied with all hardware needed for installation, designed to match all factory contours and
alignment features, and polished to a mirror finish.
Scootworks Riser Kit For Honda Phantom 750 -
New Scootworks SWR-29's are the perfect answer for those of you with the new Honda
Phantom 750 with Satin Black bars. Easy installation with a factory fit. Raise and pulls back your bars for a more comfortable fit.
-> Scootworks risers for the Honda Phantom 750 - $79.95
BUY
THIS ITEM
Scootworks Riser Kit For Honda Fury -
Scootworks SWR-27's are a direct bolt-on for the factory T-Bars on your Honda Fury. Easy
installation with a factory fit. Designed to mesh smoothly with the factory contours found on the Honda Fury bar.
Available in polished or satin black.
-> Scootworks Satin Black risers for the Honda Fury - $79.95
BUY
THIS ITEM
Round Bodied Risers for Honda
Round-bodied
Handlebar Riser- Tested by Scootworks, and kitted
with our hardware kits for correct fitment on your motorcycle.
Cool new handlebar risers to fit the Honda VLX 600, Ace 750, Aero 750 (not for use on OEM handlebar w/built-in risers. Requires handlebar change. See further up this page for new Scootworks kit to retain factory handlebars on 750 Aero!),
VT1100 Shadow, Spirit 1100,
Sabre 1100, VTX1300 R/S/C, 1800 Retro/S, and Valkyrie has deep chrome finish. Lifts
the bars about 3/4" up and 1/2" back from their OEM mounting location. Easy to install by following the
installation instructions for our PhatRisers™ above.
-> Round Handlebar Risers for Honda VLX 600, Ace 750, Aero 750 (not for use on OEM handlebar w/built-in risers. Requires handlebar change. See further up this page for new Scootworks kit to retain factory handlebars on 750 Aero!),
Aero 1100, Ace 1100, Sabre 1100, Spirit 1100 - $130.96
BUY
THIS ITEM
-> Round Handlebar Risers for Honda VTX-1300 R, S, & C (1300C requires handlebar replacement, or our new 1300C Riser kit found further up this page)- $130.96
BUY
THIS ITEM
-> Round Handlebar Risers for Honda VTX 1800R/S, Valkyrie Std & Tourer - $130.96
BUY
THIS ITEM
4" X 1" Honda Riser (riser caps ARE NOT included, see details)
Classic Style
4" X 1" Honda Riser- Tested by Scootworks, and kitted
with our hardware kits for correct fitment on your motorcycle.
These handlebar risers fit Honda Spirit 1100, Aero 1100, VTX Retro & S 1300/1800, and most other Honda
Cruisers. They are of the
Classic style and have a deep chrome finish. The centerline of the handlebar bore is up 4" from the
triple tree, and has 1" of pullback. Easy to install by following the
installation instructions for our PhatRisers™ above. These risers do not come with riser caps
(the upper clamp that holds the bars in place), you re-use the original Honda riser caps from
your bike when installing these. A great way to economically install risers on your Honda!
-> #51-445 Classic Handlebar Risers for Honda (without caps) VLX 600,
Ace 750, Aero 750 (not for use on OEM handlebar w/built-in risers. Requires handlebar change. See further up this page for new Scootworks kit to retain factory handlebars on 750 Aero!), Aero 1100, Ace 1100, Sabre 1100, Spirit 1100- $114.15
BUY
THIS ITEM
-> #51-445 Classic Handlebar Risers for Honda (without caps) VTX-1300
R, S, & C (1300C requires handlebar replacement, or our new 1300C Riser kit found further up this page)- $114.15
BUY
THIS ITEM
-> #51-445 Classic Handlebar Risers for Honda
(without caps) VTX 1800R/s, Valkyrie Std & Tourer- $114.15
BUY
THIS ITEM
4" X 1" Honda Riser
Classic Style
4" X 1" Honda Riser with caps- Tested by Scootworks, and kitted
with our hardware kits for correct fitment on your motorcycle.
These handlebar risers fit Honda Spirit 1100, Aero 1100, VTX Retro/s 1300/1800, and most other Honda
Cruisers. They are of the
Classic style and have a deep chrome finish. The centerline of the handlebar bore is up 4" from the
triple tree, and has 1" of pullback. Easy to install by following the
installation instructions for our PhatRisers™ above.
-> #55-304X Classic Handlebar Risers for Honda VLX 600,
Ace 750, Aero 750 (not for use on OEM handlebar w/built-in risers. Requires handlebar change. See further up this page for new Scootworks kit to retain factory handlebars on 750 Aero!), Aero 1100, Ace 1100, Sabre 1100, Spirit 1100- $142.45
BUY
THIS ITEM
-> #55-304X Classic Handlebar Risers for Honda VTX-1300
R, S, & C (1300C requires handlebar replacement, or our new 1300C Riser kit found further up this page)- $142.45
BUY
THIS ITEM
-> #55-304X Classic Handlebar Risers for Honda
VTX 1800R/S, Valkyrie Std & Tourer- $142.45
BUY
THIS ITEM
4" X 1" Square Body Risers w/cutouts
4" X 1" Square Body Risers w/cutouts- Tested by Scootworks, and kitted
with our hardware kits for correct fitment on your motorcycle.
These Square Body Risers w/cutouts fit most Honda cruisers. They have a robust style and have a
deep chrome finish. The centerline of the handlebar bore is up 4" from the
triple tree, and has 1" of pullback. Easy to install by following the
installation instructions for our PhatRisers™ above.
-> #55-135X Square body Risers w/cutouts for Honda VLX 600,
Ace 750, Aero 750 (not for use on OEM handlebar w/built-in risers. Requires handlebar change. See further up this page for new Scootworks kit to retain factory handlebars on 750 Aero!), Aero 1100, Ace 1100, Sabre 1100, Spirit 1100- $130.96
BUY
THIS ITEM
-> #55-135X Square body Risers w/cutouts for Honda VTX-1300
R, S, & C (1300C requires handlebar replacement, or our new 1300C Riser kit found further up this page)- $143.90
BUY
THIS ITEM
-> #55-135X Square body Risers w/cutouts for Honda
VTX 1800R/S, Valkyrie Std & Tourer- $143.90
BUY
THIS ITEM
4" X 1" Square Body Risers
4" X 1" Square Body Risers - Tested by Scootworks, and kitted
with our hardware kits for correct fitment on your motorcycle.
These Square Body Risers fit most Honda cruisers. They have a robust style and have a
deep chrome finish. The centerline of the handlebar bore is up 4" from the
triple tree, and has 1" of pullback. Easy to install by following the
installation instructions for our PhatRisers™ above.
-> #55-316X Square body Risers for Honda VLX 600,
Ace 750, Aero 750 (not for use on OEM handlebar w/built-in risers. Requires handlebar change. See further up this page for new Scootworks kit to retain factory handlebars on 750 Aero!), Aero 1100, Ace 1100, Sabre 1100, Spirit 1100- $130.96
BUY
THIS ITEM
-> #55-316X Square body Risers for Honda VTX-1300
R, S, & C (1300C requires handlebar replacement, or our new 1300C Riser kit found further up this page)- $143.90
BUY
THIS ITEM
-> #55-316X Square body Risers for Honda
VTX 1800R/S, Valkyrie Std & Tourer- $143.90
BUY
THIS ITEM
VTX1800 Retro/S Handlebar Clamp
Custom
Handlebar Top Clamps (bridge) -
This is a machined cast aluminum chrome plated grooved clamp to replace the large OEM handlebar
clamp. Great looking upgrade from the factory part!
-> #55-120 Custom Handlebar Clamp for VTX1300 R/S/T and VTX1800 F/N/R/S/T - $59.95
!!NOTE!! This also works with the Scootworks PhatRisers and PhatRisers II when used
on the above Honda models! BUY
THIS ITEM
*Scootworks products are protected by patent pending,
US/International patents, and/or intellectual property rights. Reproduction without
express written permission from Scootworks is forbidden and will be prosecuted to the fullest
extent of the law.