Amber Silver Bullets on the front forks


Red Silver Bullets on the rear fender struts


LED Mini-Bullets (grooved shown)

Silver Bullet L.E.D. Signal Lights - All new L.E.D. Silver Bullets. Beautifully chromed Silver Bullets feature a distinctive, slotted bezel with clear lenses. The CAD designed lenses enhance the already bright L.E.D. output to provide exceptional, jewel-like illumination.

These are two-circuit lights, and can be wired to operate as motorcycle turn signals with dual functions like "run-signal", "run-brake", signal-brake", etc. These lights come with an extra trim ring for a different look, as well as the load equalizer to keep your signals flashing at the correct rate (you don't need to buy the equalizer separately!).

See the mounting kits and info in the 'Mounting Hardware' section below, for alternative mounting methods on your bike.

Iron Cross L.E.D. Light

Iron Cross L.E.D. Light - This L.E.D. Iron Cross light is great added visibility and old school style. This LED light functions as a run & brake light. It measures 4-1/2" x 5" and is 3/4" thick. Great for many custom applications.

Under Fender L.E.D. Tail Light & License Mount -

##16-201A Mini Markers


##16-107A LED Marker Lights


##25-9501B LED Marker Lights

Marker and Mini-Marker Lights and Signals - These lights are universal mount, and can be used for cornering lights, mini-signals, functional replacements for reflectors, etc.

#16-111 Starburst Series Lighting


#16-113 Eagle Eye Series Lighting

NEW LED Lighting Units by Show Chrome - These lights are universal mount mini-signals and marker lights. A compact, inexpensive, and bright custom lighting alternative with low power drain! Be sure to check out the #53-439T Turn Signal Adapters for easier installation on Honda motorcycles, located further down this page.

Hollow Mounting Stud for concealed wiring




P-Clamp Style Mount




Clamshell type mounting




Two-Piece Fork Mount




Custom Two-Piece Fork Mount for VTX/Valk

Mounting Hardware, clamps, and Custom Mounts for Lights and Signals - These mounting products can be combined with the various lights, mini-signals, spots, etc. on this page for installation on your bike.

Before you order, read these notes to help with your selection of mounting hardware:

- The Hollow Stud Mounting kits allow installation via fender rail bolts, where the wire is totally concealed within the light and mount. The hollow mounting stud replaces the rear fender rail bolt, and provides a threaded stem for the light to attach. The wire passes through the center of the stud and under the fender, completely invisible from the outside. These are available in two sizes: 8mm diameter mounts (like those used on the Honda Ace 750, Kawasaki Vulcan 800/1500, etc), and 10mm diameter mounts (for mounting on the Honda Spirit 750 and other bikes with m10x1.25 fender rail bolts).

- The P-clamp Mounting kits allows the installation of lights on un-shrouded front forks (like those on the Honda 750 Spirit), etc. Note that the P-Clamp mounts may require the mounting hole to be enlarged with a drill, depending on the light attachment hardware.

- Clamshell Mounts are a very universal mounting method, and accomodate nearly every type of light. They are a bit more robust, and a good choice when attaching large spotlights, 50 watt Halogen lamps, etc.

- Two-Piece Fork Mounts are best for applications where the wiring exits the light housing, not from within a hollow mounting stud. - The small diameter vertical section of the F&S Engine guards (nearest the frame) for the Vulcan 800 and 1500 Classic are 1" diameter.

- The small OEM engine guards on the V-Star 650 is 1" diameter.

- The 1" diameter clamp makes a great 1" handlebar mount for speakers, tachometers, GPS, etc.

- Cobra and MC Enterprises engine guards are 1-1/4" diameter.

- Frame down tubes on a V-Star 650 and 1100 are 1-1/4" in diameter.

- Frame down tubes on most Vulcan's and Honda Cruisers are 1.35" diameter.

Silver Bullet Signals for the VTX Retro! Replace your bulky original equipment turn signals with our sleek and streamlined L.E.D. Silver Bullets. The kit also includes both slotted and visor bezels, you choose the look you like best. The lights are assembled with clear lenses, but red lenses are available separately. Designed specifically to mount in place of the stock assemblies, these single circuit red L.E.D. turn signals are an awesome additions to your bike.

License Plate Bracket and LED Signals for VTX 1300C/1800C. Two vast improvements in one! The sleek VTX License Plate Mount slides over the eye-sore version of a mount that comes standard on the fender, plus replaces stock turn signals with Kuryakyn's exclusive Silver Bullets. These CAD-designed lenses on L.E.D. Silver Bullets provide exceptional, jewel-like illumination. Comes with a pair of slotted and visor bezels.

Tombstone Tail Light - Go back in time without giving up any modern conveniences. This new #4990 Tombstone Tail Light provides old school styling with cutting edge L.E.D. technology, a finely chromed housing and rich, red lens. Hi-intensity L.E.D.s make sure you get noticed.

The #4990 Universal Tombstone is a Taillight only, it does not incorporate turn signal mounting bar/base plate as seen in the photo to the left. Intended for use in custom applications, mounting and wiring holes must be drilled for installation. It looks like the #4491 and #4992 on the left, without the turn signal mounting bar/base.

Make sure you are seen on the open road! This kit allows you to change your stock turn signals into Run-Turn-Brake lights with easy Plug and Play installation. The optional flash mode flashes the taillights when the brakes are hit – catching the attention of anyone behind you.

This kit includes Plug and Play Run-Turn-Brake Controller and replacement lenses or bulbs to update turn signals to Red.

Note: Triple Whammy includes everything you need for installation on motorcycles equipped with OEM turn signals. Installation of this product may be in violation of FMVSS #108.

#4804 (l) & #4803 (r)

Tru-Sphere L.E.D. Bulbs - These are the best L.E.D. replacement bulbs on the market. Each bulb features 32 mega-bright red or 32 super bright amber L.E.D.s in a completely sealed package. Tru-Sphere's unique design provides full hemispherical illumination; you won't believe the improvement over an incandescent bulb. It's dimensions are the same as a standard 1156 incandescent bulb so it can be used as a direct replacement for those applications.

LED Turn Signal Conversion Kits
Update the turn signals on your Honda cruiser (1998+) with these new L.E.D. turn signal kits. They come with modules containing 21 L.E.D.s for each light, are MUCH brighter than the original incandescent lamps in your bike's signals, and consume less power than the originals! The lens is a new cool looking clear lens, and is a direct replacement for your original. No wiring, simply plug the new wiring into the socket where the original bulb was installed. Lasts many times longer than a standard bulb, so you also reduce maintenance.

Deep Dish Bezels for turn signals
Install these kits onto your existing OEM turn signal housings for a cool and modern look. These deep dish bezels have a serious chrome finish, and add a neat chrome hood around your signal lights. Available with red, amber, or smoke lens. The smoke lens also allows for installation of the supplied amber or red lamps for a great new look without the hassles of changing a bunch of electrical gizmos! FITS: Honda VLX 600 ('98+), Ace/Spirit/Aero 750, VT1100 Sabre ('00+), VTX 1300 ('03-'09 R/S/C/T), VTX 1800 ('02-'05 R/S/C)

Turn Signal Visors/Grilles

Tail Light Visors- Chrome plated steel tail light visors that incorporate popular raised rib/fluted, teardrop, and louvered designs. Easily installed in minutes!

Rear Signal Relocator- Moves the rear flashers to the license plate bracket without original flasher arms, rail, fender or other bracket. Usually requires drilling new mounting holes to install. Sold in pairs.

Rear Signal Relocator Bars & Mounts- Moves the rear flashers to the license plate bracket.

Cleanup Kit for Aero 750

Lighted Wrap-around License Frame for Aero 750 - Replace your bulky original equipment licence mount on the Aero 750 with this cool LED lighted chrome license frame assembly. FITS: Honda 750 Aero, all years.

#53-439T Turn Signal Adapter - Allows the replacement of the OEM turn signals with the Big Bike Parts line of lights including the 16-111A, 16-111R, 16-113A, and the 16-114A lights above. These also work on any other motorcycle where the OEM signals attach via 8mm stud.