What is the difference between
MicroPolished and Chrome Plated PhatRisers™ ??
Read this FIRST before you buy...
...it could save you some money! Our micro-polished PhatRisers
rival chrome in looks, and far outlasts chrome on aluminum billet. For many years, we only
manufactured these in micro-polish, and would often receive messages from customers like "what
a beautiful chrome finish", "I can't tell the difference between your micro-polish and my
chrome parts", etc. Micro-polish has a mirror polish without the microscopic crevices that
detract from reflectivity of typical polished aluminum. Since it's not a plating like chrome,
it'll never chip or peel. It is also less expensive to you as a purchased item. Chrome _never_
has an infinite life when applied over aluminum (as opposed to steel parts), like on risers,
wheels, levers, etc.
Polished, Black, and Chrome
Pull Back Risers
PhatRisers™ w/hardware
PhatRiser 1X on VN1700 Nomad
Measurement of PhatRisers
Flamed PhatRisers™
PhatRisers™ disassembled
PhatRisers II™ mounted on a Nomad with stock cables and NO rerouting required!
NEW! PhatRisers II™ PhatRisers II™ as seen on a Vulcan 900 at Corbin.com! Click the
pic for a larger view.
PhatRisers II™ on Vulcan 800
Above and below are PhatRisers II™ on
Vulcan 1600. Stock cables, no re-routing required. Click the pics for a larger view.
PhatRisers™ by Scootworks-
Now also available in BLACK, Show Chrome, and engraved with Flames!! -
These
handlebar risers were created especially for Kawasaki Vulcan, Nomad, and Drifter owners. Put your hands and shoulders in a more
comfortable location by raising the bars 1.5" and putting your grip point 2"
closer to you. Works with original cables/hoses, but may require you to
reroute them behind the triple tree in some applications. These will work with all Vulcan
400/800/900/1500's and Nomad 1500. They come with their own upper handlebar
clamps for mounting, and do not require any drilling of the triple
trees! A direct bolt-on accessory for your bike. Beautiful polished finish!!
NOTE** The PhatRiser 1X raises the bars approximately 2", and pulls them back 2"
from the stock location for the VN1600, VN1700, & VN2000 motorcycles. These also eliminate the rubber mount on the VN1700 for a more firm
and comfortable feel.
Check out these pics of the new Flamed Phatrisers™
(these pics were taken while still sealed in plastic):
(photo)(photo)
CNC machined from T6 6061
billet, and hand micro-polished
to a beautiful mirror finish by Scootworks. Our POLISHED risers w
ill _NEVER_ blister, peel, or rust (one of the benefits of polished billet)...we
guarantee it!!!
All hardware is included to mount the risers to your bike, and to attach the handlebars. CAD designed, FEPro tested, and CNC machined from T6
(6061) billet to
Scootworks' strict specifications, specially designed to work with entire Vulcan motorcycle family. A beautifully simple
design, yet extremely robust...weighing in at over 1.35 pounds each. Starting at
$119.95,
these heavy-duty custom built billet risers & hardware are the best deal on the planet!
Pricing is:
$119.95 (micropolished), $119.95 (black), $149.95 (show chrome), $159.95 (Flames)
-> Scootworks risers for Vulcan 500 (1996+) - see this new
product at the bottom of this page...
PhatRisers II™ by Scootworks-
Now also available in BLACK and Show Chrome!! - These
handlebar risers were created especially for Kawasaki Vulcan 1500 Classic,
1500 Drifter, and Nomad (due to their longer
steering head moments), and for 'vertically challenged' 800 Vulcan owners .
Raises the bars 2.5" and pulls your grips back 3"
closer to you. Works with original cables/hoses, but requires you to
reroute them behind the triple tree in some applications. These will work
with all Vulcan 400/800/900/1500/1600/2000's and Nomad 1500/1600, too. Our favorite for the Nomad and
1500/1600 Classic (F.I. or Carb'd), due to their slightly longer stance. PERFECT
for Vulcan 800 & 900 owners with short arms or being 5'5" or shorter. Clears the
Speedometer nacelle perfectly, and allows for two possible mounting locations
to fine tune your handlebars to your specific comfort requirements. Weighing in
at over 1.6 lbs each, these hefty risers come with the
same great features as our PhatRisers™ above! Pricing is:
$129.95 (micropolished), $129.95 ( black), $154.95 (show chrome), $164.95 (Flames)
4" overlength front brake hose kits for select models can be purchased below, though are
not normally needed on the Nomads. Cables and hose for all models can be found on our 'Cables & Hoses' page.
Check out these pics of the new Flamed Phatrisers™ in Chrome
(these pics were taken while still sealed in plastic):
(photo)(photo)
-> Scootworks risers for 500 (1996+) - see this new
product at the bottom of this page...
!!NEW!! PhatRisers III™ by Scootworks
Now also available in BLACK!!- These
handlebar risers were originally created for the VT-750 Spirit, then everyone else wanted them!
For all applications we recommend 4" over length cables and hoses. These can be found on our
Cables and Hoses Page.
These risers are the biggest, fattest risers we manufacture. Weighing in at 2 lbs. per riser,
these babies are PHAT! These risers are the equivalent of an 8" x 1.25" riser, being 2 3/4" taller
than our PhatRiser II's. Check out these additional pics:
(photo 1)(photo 2)(photo 3)(photo 4)
Pricing is:
$144.95 (micropolished), $144.95 ( black), $174.95 (CHROME), $154.95 (FLAMED)
-> Scootworks risers for Vulcan 500 (1996+) - see this new
product at the bottom of this page...
-> Scootworks' PhatRisers III™ for Mean Streak- These accept any 1" handlebars, and allow many handlebar choices
for your Mean Streak!) BUY
POLISHEDBUY
BLACKBUY
CHROMEBUY
FLAMED
These Adapter Studs are designed to screw into the bottom of any H-D/American Riser or
drag T-bar assembly to adapt them to the 10mm bores used on Kawasaki Cruisers. They are
custom machined, hardened, and finished with a tough black oxide top coat. Sold in pairs.
-> SWH-001 Coarse thread (most common), 1/2"-13 x m10-1.25 $17.95 (pair)
BUY
THIS ITEM
-> SWH-002 Fine Thread, 1/2"-20 x m10-1.25 $17.95 (pair)
BUY
THIS ITEM
Scootworks Riser Kit For Vulcan 500 ('96+) -
This custom designed riser package works perfectly with the built-in riser stems of your
factory VN-500, 1996+! No need to replace handlebars to use risers and get more rise and pullback
for your 1996 or newer Vulcan 500, simply install our kit on your bars for increased comfort. This kit provides
approximately 1-3/4" rise and an additional 1-1/2" of pullback for your factory bars. Easy to
install, supplied with all hardware needed for installation, and polished to a mirror finish.
This riser package was designed to mesh perfectly with the contours of the built-in riser
stems of your original Vulcan 900 Custom Handlebars. This easy to install kit inexpensively adds
increased comfort. As a result of your top tree angle, this kit provides approximately 1-3/4"
rise and an additional 1-1/2" of pullback for your factory bars. Easy to install, supplied with
all hardware needed for installation, and polished to a mirror finish. Works with factory
wiring and hoses/cables, so you don't need anything else!
Riser Extensions For Kawasaki Vulcan 800/900/1500/1600/VN2000 (not Mean Streak or
Vulcan VN2000 LTD [model with shroud over handbar mount])-
This simple riser extension goes under your OEM handlebar mount, and as a result of your top tree angle, they
provide approximately
1-3/4" rise and an additional 1-1/2" of pullback for your factory bars. Simple to install, and are an inexpensive way
to increase comfort.
This custom designed riser package works perfectly with the stock handlebar risers of the Vulcan 1700 Classic, 1700 Classic LT, 1700 Nomad, 1700 Voyager, & 1700 Vaquero.
Easy to install, supplied with all hardware needed for installation, and polished to a
mirror finish.
Provides an additional 1-1/2" of rise, and 1-1/4" of pullback over your stock risers. Get the grips up away from the tank and your knees! Works with existing hoses and cables.
This is a sample of our round riser kits. The final installation looks similar to the 900 Custom in the photo above.
This kit is design to properly fit your factory bars perfectly.
Scootworks Riser Kit For Mean Streak 1500 & 1600 -
This custom designed riser package works perfectly with the built-in riser stems of your
factory Vulcan Mean Streak, and fits the 1500's and 1600's. No need to replace handlebars to use risers and get more rise and pullback
for your Mean Streak, simply install our kit on your bars for increased comfort. As a result of your top
tree angle, this kit provides
approximately 1-3/4" rise and an additional 1-1/2" of pullback for your factory bars. Easy to
install, supplied with all hardware needed for installation, and polished to a mirror finish.
Works with factory wiring and hoses/cables, so there's no need to buy anything else!
*Scootworks products are protected by patent pending,
US/International patents, and/or intellectual property rights. Reproduction without
express written permission from Scootworks is forbidden and will be prosecuted to the fullest
extent of the law.