Kawasaki Signal Lights, Tail Lights, Blinkers, Mounting Adapters & Accessories
VN1700 Vaquero & Voyager LED Signal/Speaker Grilles!
VN1700 Vaquero & Voyager LED
Signal/Speaker Grilles! - Chrome speaker grilles with embedded amber turn signal strip.
Improves visibility of blinkers from behind.
-> VN1700 Vaquero & Voyager LED Signal/Speaker Grilles - $142.45 BUY
THIS ITEM(PHOTO)
Amber Silver Bullets on the front forks
Red Silver Bullets on the rear fender struts
LED Mini-Bullets (grooved shown)
Silver Bullet L.E.D. Signal
Lights -
All new L.E.D. Silver Bullets. Beautifully chromed Silver Bullets feature a distinctive,
slotted bezel with clear lenses. The CAD designed lenses enhance the already bright L.E.D.
output to provide exceptional, jewel-like illumination.
These are two-circuit lights, and can be wired to operate as motorcycle turn signals with dual functions like "run-signal",
"run-brake", signal-brake", etc. These lights come with an extra trim ring for a different look,
as well as the load equalizer to keep your signals flashing at the correct rate (you
don't need to buy the equalizer separately!).
See the mounting kits and info in the 'Mounting Hardware' section below, for alternative
mounting methods on your bike.
-> #2385 Smooth L.E.D. Mini Bullets, Amber (pair) - $DISCONTINU BUY THIS ITEM
-> #2386 Smooth L.E.D. Mini Bullets, Red (pair) - $DISCONTINU BUY THIS ITEM
-> #2295 Small Visor, top mount (pair) - $DISCONTINU BUY THIS ITEM
-> #2296 Small Visor, bottom mount (pair) - $OutOfStock BUY THIS ITEM
-> #2297 Small Visor, left and right mount - $OutOfStock BUY THIS ITEM
-> #2377 Red lens for LED Silver Bullets (pair) - $DISCONTINU BUY THIS ITEM
-> #2378 Amber lens for LED Silver Bullets (pair) - $DISCONTINU BUY THIS ITEM
-> #4709 Isolation Kit - $7.99 This is often required on bikes with single turn signal indicator in instrument cluster to prevent 'cross-talk' between LED lights.
BUY THIS ITEMInstallation Instructions
Iron Cross L.E.D. Light
Iron Cross L.E.D. Light -
This L.E.D. Iron Cross light is great added visibility and old
school style. This LED light functions as a run & brake light. It measures 4-1/2" x 5" and is
3/4" thick. Great for many custom applications.
Marker and
Mini-Marker Lights and Signals - These lights
are universal mount, and can be used for cornering lights, mini-signals, functional replacements
for reflectors, etc.
-> #16-201A Amber Angle Mini Marker Light (pair) - $Discontinu (pair) BUY
THIS ITEM
-> #16-107A Amber LED Marker Lights w/Amber lens-
These marker lights replace the reflectors found on most Cruisers. These lights
greatly enhance visibility by incorporating 15 mini high visibility LED's. Mounts
with double sided adhesive to replace both tape and screw mounted reflectors.
Measure 1-1/4" x 3-1/2". Great replacement for radiator side reflectors. - $59.95 (pair) BUY
THIS ITEM
-> #16-107R RED LED Marker Lights w/Red lens -
These marker lights replace the reflectors found on most Cruisers. These lights
greatly enhance visibility by incorporating 15 mini high visibility LED's. Mounts
with double sided adhesive to replace both tape and screw mounted reflectors.
Measure 1-1/4" x 3-1/2". Great replacement for radiator side reflectors. - $disc (pair) BUY
THIS ITEM
-> #16-117A Amber LED Marker Lights w/CLEAR lens -
Same as 16-107A above, except with CLEAR lens - $DISCONTINU (pair) BUY
THIS ITEM(photo)
-> #16-117RS RED LED Marker Lights w/CLEAR lens -
Same as 16-107R above, except with CLEAR lens (and comes only in single unit per package) - $DISCONTINU (each) BUY
THIS ITEM(photo)
-> #25-9501 Chrome LED Marker, self-adhesive, clear lens, red LED -
Flush mount, chrome body, chrome lens, LED light. Measure 2.5" L x 1" W x 3/4" H. - $16.95 (pair) BUY
THIS ITEM(photo)
-> #25-9501B Chrome LED Marker, stud mount, clear lens, red LED -
Flush mount, chrome body, chrome lens, LED light. Measure 2.5" L x 1" W x 3/4" H. - $19.95 (pair) BUY
THIS ITEM(photo)
-> #25-9503 Chrome LED Marker, self-adhesive, clear lens, amber LED -
Flush mount, chrome body, chrome lens, LED light. Measure 2.5" L x 1" W x 3/4" H. - $16.95 (pair) BUY
THIS ITEM(photo)
-> #25-9503B Chrome LED Marker, stud mount, clear lens, amber LED -
Flush mount, chrome body, chrome lens, LED light. Measure 2.5" L x 1" W x 3/4" H. - $19.95 (pair) BUY
THIS ITEM(photo)
#16-111 Starburst Series Lighting
#16-113 Eagle Eye Series Lighting
NEW LED Lighting
Units by Show Chrome - These lights
are universal mount mini-signals and marker lights. A compact, inexpensive, and bright custom lighting
alternative with low power drain!
-> #16-111A Amber Starburst-series lights -
1-5/8" dia. x 2-1/2" long, comes with M8 x 35mm mounting stud - $119.95 (pair) BUY
THIS ITEM(photo)
-> #16-111R Red Starburst-series lights -
1-5/8" dia. x 2-1/2" long, comes with M8 x 35mm mounting stud - $119.95 (pair) BUY
THIS ITEM(photo)
-> #16-113A SMALL Amber Eagle Eye-series lights -
1-1/4" dia. x 3-3/4" long, comes with M8 x 35mm mounting stud - $DISC (pair) BUY
THIS ITEM(photo)
-> #16-114A LARGE Amber Eagle Eye-series lights -
1-5/8" dia. x 4-5/8" long, comes with M8 x 35mm mounting stud - $DISC (pair) BUY
THIS ITEM(photo)
Hollow Mounting Stud for concealed wiring
P-Clamp Style Mount
Clamshell type mounting
Two-Piece Fork Mount
Mounting Hardware,
clamps, and Custom Mounts for Lights and Signals - These
mounting products can be combined with the various lights, mini-signals, spots, etc. on this
page for installation on your bike.
Before you order, read these notes to help with your selection of mounting hardware:
- The Hollow Stud Mounting kits allow installation via fender rail bolts, where the wire is
totally concealed within the light and mount. The hollow mounting stud replaces the rear fender
rail bolt, and provides a threaded stem for the light to attach. The wire passes through
the center of the stud and under the fender, completely invisible from the outside. These are
available in two sizes: 8mm diameter mounts (like those used on the Honda Ace 750, Kawasaki
Vulcan 800/1500, etc), and 10mm diameter mounts (for mounting on the Honda Spirit 750 and other
bikes with m10x1.25 fender rail bolts).
- The P-clamp Mounting kits allows the installation of lights on un-shrouded front forks
(like those on the Honda 750 Spirit), etc. Note that the P-Clamp mounts may require the mounting
hole to be enlarged with a drill, depending on the light attachment hardware.
- Clamshell Mounts are a very universal mounting method, and accomodate nearly every type of light.
They are a bit more robust, and a good choice when attaching large spotlights, 50 watt Halogen
lamps, etc.
- Two-Piece Fork Mounts are best for applications where the wiring exits the light housing,
not from within a hollow mounting stud.
- The small diameter vertical section of the F&S Engine guards (nearest the frame) for the
Vulcan 800 and 1500 Classic are 1" diameter.
- The small OEM engine guards on the V-Star 650 is 1" diameter.
- The 1" diameter clamp makes a great 1" handlebar mount for speakers, tachometers, GPS, etc.
- Cobra and MC Enterprises engine guards are 1-1/4" diameter.
- Frame down tubes on a V-Star 650 and 1100 are 1-1/4" in diameter.
- Frame down tubes on most Vulcan's and Honda Cruisers are 1.35" diameter.
-> #2289 Mounting kit for 8mm Fender rail bolts (pair) - $12.99 BUY THIS ITEM
-> #2285 39mm Two-Piece Fork Mounts
(for use with lights where wiring does not exit via a hollow mounting
stud)- $59.99 (pair) BUY
THIS ITEM
-> #2286 41mm Two-Piece Fork Mounts (for use with lights where wiring does not exit via a hollow mounting
stud)- $59.99 (pair) BUY
THIS ITEM
-> #2287 49mm Two-Piece Fork Mounts (for use with lights where wiring does not exit via a hollow mounting
stud)- $59.99 (pair) BUY
THIS ITEM
Cleanup Kit for the Kawasaki Mean Streak - Replace
your bulky original equipment turn signal mounts and license plate framing with this sleek looking
chrome beauty! Brings your rear turn signals in nice and tight, while providing a cool chrome
fender trim and slanted license plate mount. FITS all Kawasaki Mean Streak 1500's and 1600's
#9157 Matching Curved License Plate for #4991 above
Tombstone Tail Light -
Go back in time without giving up any modern conveniences. This new #4991 Tombstone Tail Light (shown to the left)
provides old school styling with cutting edge L.E.D. technology, a finely chromed housing
and rich, red lens. Hi-intensity L.E.D.s make sure you get noticed. More than just a tail light,
the base incorporates a removable license plate bracket. Moreover, it was designed for the
base plate to work with the sleek Silver Bullets. The Silver Bullets are
required for signals, and are sold separately below.
The #4990 Universal Tombstone is a Taillight only, it does not incorporate turn signal
mounting bar/base plate. Intended for use in custom applications, mounting and wiring
holes must be drilled for installation. It looks like the #4491 and #4992 on the left,
without the turn signal mounting bar/base.
-> #4991 Tombstone Tail Light for Vulcan 1600 Classic - $DISCONTIN BUY THIS ITEM
-> #4990 Universal Tombstone Tail Light- $139.99 BUY THIS ITEM
-> #2366 L.E.D. Red Silver Bullets (pair) for use with Tombstone above- $DISCONTINU BUY THIS ITEM
-> #2367 L.E.D. Amber Silver Bullets (pair) for use with Tombstone above- $DISCONTINU BUY THIS ITEM
-> #9157 Curved License Plate Frame -
This cool curved license plate frame puts the finishing touches on our #4991 Tombstone
Taillights. It accepts 4" x 7" plates and attaches to the existing holes on the #4991
base plate. -
$69.99
BUY THIS ITEM(PHOTO)
-> #2265 Clear Replacement Turn
Signal Lenses. Fits: Kawasaki All '07-'08 Vulcan 900, '02-'08 Vulcan 1500/1600 Mean
Streak Models only - $10.99 (pair) BUY
THIS ITEM(photo)
Make sure you are seen on the open road! This kit
allows you to change your stock turn signals into Run-Turn-Brake lights with easy Plug and
Play installation. The optional flash mode flashes the taillights when the brakes are hit –
catching the attention of anyone behind you.
This kit includes Plug and Play Run-Turn-Brake Controller and replacement lenses or bulbs to
update turn signals to Red.
Note: Triple Whammy includes everything you need for installation on motorcycles equipped
with OEM turn signals. Installation of this product may be in violation of FMVSS #108.
-> #4606 Triple Whammy™ Run-Turn-Brake Light Kit.
Fits: Kawasaki All '03-'08 Vulcan 1600 Models (ex. Mean Streak)
- $DISCONTINU BUY
THIS ITEM(photo)
-> #4607 Triple Whammy™ Run-Turn-Brake Light Kit.
Fits: Kawasaki All '07-'08 Vulcan 900 Models & All '02-'08 Vulcan 1500/1600 Mean Streak Models Only - $DISCONTINU BUY
THIS ITEM(photo)
#4804 (l) & #4803 (r)
Tru-Sphere L.E.D. Bulbs
- These are the best L.E.D. replacement bulbs
on the market. Each bulb features 32 mega-bright red or 32 super bright amber L.E.D.s in
a completely sealed package. Tru-Sphere's unique design provides full hemispherical
illumination; you won't believe the improvement over an incandescent bulb. It's dimensions
are the same as a standard 1156 incandescent bulb so it can be used as a direct
replacement for those applications.
-> #4801 Red L.E.D. Single Circuit Bulb (ea) [replaces 1156] - $39.99 BUY
THIS ITEM
-> #4804 Amber L.E.D. Single Circuit Bulb (ea) [replaces 1156] - $DISCONTINU BUY
THIS ITEM
Celestar™ Style Accents
Smooth Billet Turn Signal Visor
Turn Signal and Reflector Accents and Visors
-> #63-113 Celestar™ Turn Signal and Reflector Accents- Surface
mounts to 1-7/8" (and larger) signals and reflectors - $10.95 (pair) BUY THIS ITEM(photo)
-> #61-109 Celestar™ Turn Signal Accent Grilles- Surface
mounts to 2-3/8" (and larger) signals and reflectors $14.95 (pair) BUY THIS ITEM(photo)
->#71-115 Chrome Reflector Grille for rectangular reflector with 2-1/2" x 1-1/2" lens - FITS: Kawasaki
Vulcan 500, 750, 800, 900 (all), 1500, 1600, 2000 $11.95 (pair) BUY THIS ITEM(photo)(photo)
-> #82-225 Round Chrome Grilles- FITS: Any 2" diameter round reflector or light. $16.95 (pair) BUY THIS ITEM(photo)
Deep dish bezels with smoke lens/colored lamps
Deep Dish Bezels for turn signals Install these kits onto your existing OEM turn signal housings for
a cool and modern look. These deep dish bezels have a serious chrome finish, and add a neat chrome hood around
your signal lights. Available with red, amber, or smoke lens. The smoke lens also allows for
installation of the supplied amber or red lamps for a great new look without the hassles of changing
a bunch of electrical gizmos! FITS: Vulcan 1600 Classic, 1600 Mean Streak, 1600 Nomad, Vulcan 2000.
-> #2270 Deep Dish Bezels w/ Smoke Lens and Amber 2-circuit bulbs (1157-style lamps)- $39.99 (pair) BUY THIS ITEM(instructions)
-> #2271 Deep Dish Bezels w/ Smoke Lens and Red 1-circuit bulbs (1156-style lamps)- $49.99 (pair) BUY THIS ITEM(instructions)
CWI Flasher Relocator
Cobra Flasher Relocator
Rear Signal Adapters-
Can be used to remove the black rubber spacer from the rear turn signal stems, or to relocate
the signals to another location like a license plate bracket, fender rail, fender or
other bracket. Usually requires drilling new
mounting holes to install. Sold in pairs.
-> Kawasaki Flasher
Adapter for VN1500 A,B,C '87-'99 [CWI], CNC Machined billet - $52.95 BUY
THIS ITEM
-> Kawasaki Flasher
Adapter for VN1500 D,E,N '96+ [CWI], CNC Machined billet - $94.95 BUY
THIS ITEM
Universal Flasher Relocator Bar (may be black or chrome)
Chrome License Plate Lighting Bracket
Rear Signal
Relocator Bars & Mounts- Moves
the rear flashers to the license plate bracket.
-> #05-201 Universal Flasher Relocator Bar. $15.95 BUY THIS ITEM