KLR Adjustable Lowering Kit

KLR-650 & KLX-650 Adjustable Lowering Kits- Scootworks first designed and marketed this kit in January 1999, so we know KLR & KLX lowering! This lowering kit from Scootworks lowers the rear of your KLR-650 or KLX-650 dual purpose motorcycle 1, 2, or 3 inches for a lower saddle height. Now you can adjust the height to fit the rider. Helps you get both feet flat on the ground for better stability.

EN500 Lowering Kit  - Finally, a bolt-on lowering kit for the 1990+ Vulcan EN500. Drop your Vulcan 500 1-1/2" - 2" (depending on shock setting) in a matter of minutes with this easily installed kit. Requires NO modifications to your bike or shocks. Drops your bike 1-1/2" - 2" for the lowest ride. Everything you need is included in this kit, including installation instructions. This kit can be installed in as little as 15 minutes with common tools. An easy do-it-yourself project! Our REAR lowering kit is CAD designed, FEPro tested, CNC machined, and laser cut for exact tolerances. For use with stock OEM shocks. These have not been tested for use with aftermarket shocks. Scootworks originally designed and marketed this kit in June 2007 for one our own show bikes, so we understand the needs of the EN-500 rider!

Next, lower your Vulcan 500's front suspension in increments of 1, 2, or 3 inches with the Scootworks (SW) kit. Kit includes everything you need to lower your front suspension, including detailed installation instructions...easy install!

Model Years: 1990+  

"LoRidr" Adjustable Lowering Kit - Originally designed in mid-1998 by Scootworks for the 'LoRider' (featured in November 2001 V-Twin, December 2001 Insider, & February 2002 Motorcycle Cruiser Magazines), we've since manufactured thousands of these units. They've been spotted on lots of award winning custom bikes (including Bryan Long's Vulcan 800A January 2006 Bikers2000 Magazine) and customized cruisers all over the world. For Vulcan 400 & 800A, Classic (B), and 800 Drifter - Lower your bike's rear suspension w-a-y down, 1, 2, or 3 inches lower! Gives you a lower seat height and helps you get your feet flat on the ground. Includes a pre-load kit for loads up to 240 lbs.

• For loads greater than 240 lbs, Scootworks recommends that you purchase and install  the "Pre-Load Accessory Kit" below.

• To Install any of the Pre-Load kits, it will be necessary to compress your rear shock spring. For do-it-yourselfers, this can be done by using our "Shock Compression Kit" (sold below), or by taking your rear shock to a dealer or repair shop and letting them do it for you.

Model Years: All 

 Scootworks Special Buy... Purchase all 3 items above and save! 

Rear Shock Pre-Load Improvement Kit - for Vulcan 400, 800/Drifter 800 & KLR Motorcycles. This kit provides up to 14 additional rear shock pre-load settings, and includes snubbers to raise the mechanical stop of your shock.

• Should be used when the load is greater than 240 lbs.

• To Install  the Pre-Load kit, it will be necessary to compress your rear shock spring. For do it yourselfers, this can be done by using our "Shock Compression Kit" (sold below), or by taking your rear shock to a dealer or repair shop and letting them do it.

Rear Shock Spring Compression Kit - for Vulcan 400, 800/Drifter 800 & KLR Motorcycles. Use this handy tool for any rear shock work you may have to do. Works great when installing the pre-load kits above.

Model Years: all 

Vulcan 900 'LoRidr' Adjustable Lowering Kit  - for Vulcan 900 Classic and Custom Motorcycles. Lower your bike's rear suspension w-a-y down, 1, 2, or 3 inches lower. Gives you a lower seat height and helps you get your feet flat on the ground. Easy to install, and comes complete with new precision bearings pre-installed and a detailed instruction manual! No preload kit or shock spring compressor is required for this system. We were the first to design and market this in the fall of '06 to lower your VN900, so we can provide the tech support and stand behind our product...after all, we designed it!

PS Custom Shock Kits

Rear Suspension Lowering Kit - Lower your bike's rear suspension with these custom rear shock packs. This allows for lowering of motorcycles that conventional lowering kits don't exist for. Easy to install, and adds a cool low look to your machine!

Model Years: All 

Air Balance Kit

Accessories for Air Shocks and Progressive Suspension - Add our Air Balance Kit to your air shocks to make air adjustment a snap by feeding both shocks from a common source. Next, use our air shock pump to accurately fill your expensive air shocks without fear of damage to the internal air bladder!

Scootworks Front Lowering Kits


PS Lowering Kits


PS Spring Pack

Front Suspension Lowering Kit - Lower your bike's front suspension in increments of 1, 2, or 3 inches with the Scootworks (SW) kits, or continuously variable lowering with the PS Spring packs. Kits include everything you need to lower your front suspension, including detailed installation instructions.

Model Years: All