Scootworks Vulcan 400, 800, & 1500 Classic -
Front Wheel Adapter Kit- We are now producing Custom Wheels,
and are phasing out our wheel adapter kits.This
is no longer available as a kit, only partial components for the 'Do It Yourselfers",
while components last. See below:
--> Front Rotor Adapter: High quality CNC Machined rotor adapter allows you to install the OEM Kawasaki front brake rotor
onto any 16" H-D compatable front wheel. This allows for correct rotor location within your Kawasaki
fork leg mounted brake caliper (H-D rotors are slightly smaller and H-D wheel hubs are a different width, and do not work
as well with your OEM caliper location). This was an expensive part to manufacture, and are only available
while this batch lasts. The outer portion of the rotor adapter is radiused and polished, and
has 5 countersunk bolt locations to fit your H-D compatable wheel. The reverse side has the recess for early and late
model seal sizes, and perfectly locates your Vulcan 400 Classic, 800 Classic, and 1500 Classic
front rotor on the wheel. Check out the picture links below. $40.00 !! The perfect item for Do-It-Yourselfers! BUY
THIS ITEM(top pic)(bottom pic)
--> Wheel/Axle Spacer Kit: High quality CNC Machined wheel and axle spacers. Each kit comes with a pack of 4 in the following
lengths: .623"/15.82mm, .795"/19.3mm, .792"/20.10mm, & 1.340"/34.05mm. These have a .750" (3/4") inner bore, and standardized
1.125" (1 1/8") outer diameter to fit all H-D style axle seals and diameters. The spacers can be seen in the picture link below.
$20.00 !! The perfect item for Do-It-Yourselfers! BUY
THIS ITEM(pic)
--> Wheel/Axle Shims: High quality CNC Machined wheel and axle spacers. These are .0795"/2.0mm thick, have a .750" (3/4") inner bore, and standardized
1.125" (1 1/8") outer diameter to fit all H-D style axle seals and diameters. These are often VERY helpful when assembling a custom wheel
package, as they allow you to shim the wheel to one side or the other on the axle. A MUST when installing most H-D wheels on
metric bikes! The shims can be seen in the picture link below.
$1.50 each The perfect item for Do-It-Yourselfers! BUY
THIS ITEM(pic)
Shown installed on a Vulcan 800
Classic "w/ Rev-Tech "Inferno" Wheels
VN400A/VN800A Front Wheel Adapter Kit
Front Rotor Adapter for 400/800A
Wheel Spacer Kit
Wheel/Axle Shims
Scootworks Vulcan 400 and 800 "A" (Standard) -
Front Wheel Adapter Kit-Scootworks wheel
adapter kit will allow you to change from spokes to a new custom
aluminum or chrome wheel on the front of your Vulcan cruiser in just
minutes! Until
now, custom wheels were only available for H-D or other custom built
motorcycles and were rarely seen on metric bikes. Now you can install
one on your Vulcan in just a few minutes, and NO modifications to your
bike are necessary! There is a tremendous aftermarket supply of wheel
designs from companies like Rev-Tech, RC Components, Iron Horse, and
others for you to choose from. Utilize any 21" aftermarket wheel
designed for the H-D Wide-Glides, equipped with tapered serviceable or
sealed 3/4" I.D. bearings (pre-2000). Click the
"Description" link below for more information.
Model Years: 1995 to present
--> For all aftermarket and Harley Davidson wheels with std or sealed 3/4" I.D. bearings $199.99 NOTE: !!!LIMITED QUANTITy!!!... BUY
THIS ITEM(description)
RC Components wheels shown fitted for a Vulcan 800
'A' with single piston caliper
--> Front Rotor Adapter for A models: High quality CNC Machined rotor adapter allows you to install the OEM Kawasaki front brake rotor
onto any H-D compatable wheel. This allows for correct rotor location within your Kawasaki
'A' model fork leg mounted brake caliper (H-D rotors are slightly smaller and H-D wheel hubs are a different width, and do not work
as well with your OEM caliper location). This was an expensive part to manufacture (requires a LARGE slug of billet!), and are only available
while this batch lasts. The outer portion of the rotor adapter is radiused and polished, and
has 5 countersunk bolt locations to fit your H-D compatable wheel. The reverse side has the recess for early and late
model seal sizes, and perfectly locates your Vulcan 400 'A', 800 'A', and 'A'
front rotor on the wider hubs found on the Wide-Glide sytle wheels. Check out the picture links below. $50.00 The perfect item for Do-It-Yourselfers! BUY
THIS ITEM(top pic)(bottom pic)
--> Wheel/Axle Spacer Kit: High quality CNC Machined wheel and axle spacers. Each kit comes with a pack of 4 in the following
lengths: .623"/15.82mm, .795"/19.3mm, .792"/20.10mm, & 1.340"/34.05mm. These have a .750" (3/4") inner bore, and standardized
1.125" (1 1/8") outer diameter to fit all H-D style axle seals and diameters. The spacers can be seen in the picture link below.
$20.00 The perfect item for Do-It-Yourselfers! BUY
THIS ITEM(pic)
--> Wheel/Axle Shims: High quality CNC Machined wheel and axle spacers. These are .815"/2.0mm thick, have a .750" (3/4") inner bore, and standardized
1.125" (1 1/8") outer diameter to fit all H-D style axle seals and diameters. These are often VERY helpful when assembling a custom wheel
package, as they allow you to shim the wheel to one side or the other on the axle. A MUST when installing most H-D wheels on
metric bikes! The shims can be seen in the picture link below.
$1.50 each. The perfect item for Do-It-Yourselfers! BUY
THIS ITEM(pic)
Shown installed on a Vulcan 800
Kawasaki Chrome Wheel
Covers- These wheel
covers are designed to cover spoke wheels and are made of heavy sheet
steel with a beautiful chrome finish. Provides that cool 'solid wheel look' for a fraction of the cost of
a wheel replacement! Solid performers in the field, we've NEVER had a single complaint about loosening or noise.
--> Vulcan 800 FRONT, fits all Classic Vulcan 800's w/16" Front Wheel $208.76 BUY
THIS ITEM(pic)
--> Vulcan 800 REAR, fits all Classic and "A" model Vulcan 800's! $208.76 BUY
THIS ITEM(pic)
--> Vulcan 1500 FRONT, fits all Classic Vulcan 1500's w/16" Front Wheel $208.76 BUY
THIS ITEM(pic)
--> Vulcan 1500 REAR, fits all Classic models, EFI & Carb'd $208.76 BUY
THIS ITEM(pic)
Wheel
Accessories
Scootworks Rear Axle Adjuster Covers -
Designed for select Kawasaki Cruisers. NEW from Scootworks! Dress up the rear of
your Kawasaki Cruiser with our new axle adjustment covers. These covers fit over the rear wheel axle adjustment
bolts/nuts to hide those unsightly zinc plated bolts. Scootworks axle adjustment covers screw on and off easily
whenever you need to adjust your chain or belt drive tension. Several styles available!
Chrome
Caliper Caps- These wicked looking
caliper covers install in minutes on 800 and 1500 Vulcan front brakes. No tools required. NOTE:
Nomad requires 2 parts.
Vulcan 1500 Nomad, carb'd and F.I. - $19.31 (pair) BUY
THIS ITEM
Lower Fork Skins
Chrome Lower Fork Skin Kits
-> #8690 Chrome Lower Fork Skins
Fits: All All '03-'08 Vulcan 1600 Models (except Mean Streak) - $147.19 BUY THIS ITEM(photo)
Fluted Front Caliper Accent
Brake Caliper Accents-
These caliper accents are available in fluted, and swept designs. Easily attached
in minutes, to give your brake calipers an added bit of detail.
-> FRONT Caliper Accent, Fluted
- Fits Kawasaki Vulcan 800 Classic, Vulcan 900 (all), Vulcan 1500 A/B/C/L, Vulcan 1500 Classic (carb'd and F.I.) - $32.15 (each)
BUY THIS ITEM(photo)
-> FRONT Caliper Accent, Fluted
- Fits Kawasaki Vulcan 1500 Nomad, carb'd and F.I. - $68.95 (pair)
BUY THIS ITEM(photo)
-> FRONT Caliper Accent, Swept
- Kawasaki Vulcan 800 Classic, Vulcan 900 (all), Vulcan 1500 A/B/C/L, Vulcan 1500 Classic (carb'd and F.I.) - $32.15 (each)
BUY THIS ITEM(photo)
-> FRONT Caliper Accent, Swept
- FITS Kawasaki Vulcan 1500 Nomad, carb'd and F.I. - $68.95 (pair)
BUY THIS ITEM(photo)
-> FRONT Caliper Accent, Fluted
- Fits Kawasaki Vulcan VN2000 - $DISC (pair)
BUY THIS ITEM(photo)
-> FRONT Caliper Accent, Swept
- Kawasaki Vulcan Mean Streak 1500/1600 (all) - $64.35 (pair)
BUY THIS ITEM(photo)
Chrome
Caliper Covers- Beautiful
chrome covers by CWI and Show Chrome [SC] add a nice touch to the brake calipers of your
bike! Chrome mounting hardware included.
-> Vulcan 800 Classic (all) [CWI], heavy chromed billet FRONT caliper cover- $107.96 BUY
THIS ITEM(PHOTO)
-> Vulcan 900 (all), heavy chromed steel Left FRONT caliper cover- $71.96 BUY
THIS ITEM(PHOTO)
-> VN900 [SC], REAR brake caliper cover. This cool stepped design rear caliper
cover is made of stamped steel with a heavy chrome plating for long lasting beauty. Easy
installation with the included hardware. - $71.96 BUY
THIS ITEM(PHOTO)
-> Vulcan 1500
Classic (95+) [CWI], heavy chromed billet FRONT caliper cover- $107.96 BUY
THIS ITEM(PHOTO)
-> Nomad (2 sides)
(all) [CWI], heavy chromed billet FRONT caliper cover- $215.96 BUY
THIS ITEM(PHOTO)
-> Vulcan Mean Streak 1600 ('04+) [SC], chromed FRONT caliper cover - $71.96 (comes as pair!) BUY
THIS ITEM(PHOTO)
-> VN1500 Nomad, VN1600 Nomad, Mean Streak 1500/1600 [SC], REAR brake caliper cover. This cool stepped design rear caliper
cover is made of stamped steel with a heavy chrome plating for long lasting beauty. Easy
installation with the included hardware. - $71.96 BUY
THIS ITEM(PHOTO)
-> Vulcan VN2000 (all), heavy chromed steel LEFT FRONT caliper cover- $71.96 BUY
THIS ITEM(PHOTO)
-> Vulcan VN2000 (all), heavy chromed steel RIGHT FRONT caliper cover- $71.96 BUY
THIS ITEM(PHOTO)
-> 71-125 Vulcan VN2000 (all), heavy chromed steel REAR caliper cover- $71.96 BUY
THIS ITEM(PHOTO)
Chrome Banjo Bolt and Brake Bleeder Covers
-> #2018 Bleeder cover- This little gem is the perfect compliment to the Banjo Bolt Cover below. Easily installed over the stock rubber cover, this piece provides a nice detail when dressing up brake calipers on metric cruisers. - $10.11 BUY THIS ITEM(PHOTO)
-> #2013 - Same as #2018 above, except sold in pairs for more savings! - $18.39 BUY THIS ITEM(PHOTO)
-> #2015 Fluted Banjo bolt cover- This trick little cover "erases" nasty looking zinc or cad plated brake line fittings that are very prone to rust or corrosion. They also add finishing detail to Master Cylinder Covers and Caliper Covers. Fits most cruisers with banjo fittings requiring a 12 mm wrench. - $14.71 BUY THIS ITEM(PHOTO)
-> #1-319 Smooth Billet Bleeder bolt cover- Smooth chrome cover is easy to install! - $11.35 BUY THIS ITEM(PHOTO)
-> #1-318 Smooth Chrome Banjo bolt cover- Smooth chrome cover is easy to install! - $13.46 BUY THIS ITEM(PHOTO)
#1203 Kuryakyn Axle Caps for Kawasaki Vulcan
It's amazing what a difference
adding a small detail like this will do for a front end. In minimal time, rusted, corroded,
or chewed up axle ends and hardware are replaced with a pristine chrome finish! Fits all years of
Kawasaki Vulcan 800 Classic (not "A" or Standard), Vulcan 900 (left side), 1500 Classics, Drifter 800/1500, and all Nomad 1500's (not 1600).
$19.31 (pair) BUY THIS ITEM
# 71-118 Axle Plug for Kawasaki Vulcan
This simple yet attractive chrome axle plug is
an easy install, and just presses into the open bore in the end of your front axle. Fits Kawasaki Vulcan 1600 Mean Streak and VN2000.
$22.46 BUY THIS ITEM
-> Vulcan 1500 & 1600 Classic/Nomad (NOTE- Electronic Speedometer models only, not for models with front wheel driven speedometer)
by Show Chrome - $152.96 BUY
THIS ITEM(PHOTO)
Warheads for Vulcan, Drifter, Nomad and Mean Streak- Drop
the bomb! The next generation has arrived. Are you ready? These mean
little monsters slide over your forks and are designed to portray
aggressive, unruly and unsocial behavior. Forget what everybody else is
bolting on their bike! You lead the trend. Guaranteed to make
them circle and stare at the next rally. Warheads are machined
from extruded billet aluminum and chrome plated. They attach with two set
screws per part, and we've NEVER had one to loose! Come in Smooth and Speed
Milled.
-> Eagle Front Fender Ornament
This bird is the word! Your front fender will take on
new life with this majestically sculpted chrome and gold eagle with amber lighted
eyes. One screw and the top comes off for easy bulb replacement. - $42.31 BUY THIS ITEM(PHOTO)
Front Fender Rail/Bumper
Front Fender Rail/Bumpers for Nomad
Fender Rails/Bumpers and Trim
Vulcan 900
-> #71-317
Chrome Front Fender Rail - Steel twin rail design mounts
to front forks. Bolts on easily to original fender mounting bracket. FITS: Kawasaki
VN900 Classic & Classic LT - $71.96 BUY THIS ITEM(PHOTO)
Vulcan 1500 Classic/Std
-> #66041
Chrome Front Fender Rail - Steel twin rail design mounts
to front forks. Bolts on easily to original fender mounting bracket. FITS: Vulcan 1500 Classic (all),
VN1500 Standard ('96-'99) - $150.83 BUY THIS ITEM(PHOTO)
Vulcan 1500 Nomad
-> #66042
Chrome Front Fender Rail - Steel twin rail design mounts
to front forks. Bolts on easily to original fender mounting bracket. FITS: Vulcan 1500 Nomad (all) - $150.95 BUY THIS ITEM(PHOTO)
Vulcan 1600 Nomad
-> #1405-0018
Chrome Front Fender Rail - Steel twin rail design mounts
to front forks. Bolts on easily to original fender mounting bracket. FITS: Vulcan 1600 Nomad (all) - $150.95 BUY THIS ITEM(PHOTO)
Vulcan VN2000
-> #71-122
Chrome Front Fender Rail - Steel twin rail design mounts
to front forks. Bolts on easily to original fender mounting bracket. FITS: Kawasaki
VN2000 - $71.96 BUY THIS ITEM(PHOTO)
Studded Mudflap
Mud Flaps and Mud Guards
-> #DL-Flap
Studded leather mudflap customized by Scootworks to include
a cool Mustang chrome concho. Great way to dress up your fender while stopping
mud and stones from being thrown into the front of your engine and/or radiator! - $29.95 BUY THIS ITEM(PHOTO)(pic on bike)
1 pc Front Fender Trim
1 pc Rear Fender Trim
2pc Front Fender Trim
National Cycle Fender Tips
--VN800 Classic---
-> #N719 Front
Fender Trim, Vulcan 800 Classic -
Fits all years VN800B (Classic) -
$61.70 BUY THIS ITEM(PHOTO)
-> #N721 Rear
Fender Trim, Vulcan 800 Classic -
Fits all years VN800B (Classic) -
$71.20 BUY THIS ITEM(PHOTO)
--VN900 Classic & LT---
-> #N7021 Front
Fender Trim, Vulcan 900 Classic & LT-
For Front and back ofr Front Fender. Fits all years VN900 (Classic & LT) -
$130.49 BUY THIS ITEM
-> #N7022 Rear
Fender Trim, Vulcan 900 Classic & LT -
Fits all years VN900 (Classic & LT) -
$80.95 BUY THIS ITEM
--VN1500 Classic---
-> #N724 Front
Fender Trim, Vulcan 1500 Classic -
Fits all years Vulcan 1500 Classic (Carb & F.I.) -
$61.70 BUY THIS ITEM(PHOTO)
-> #N720 Rear
Fender Trim, Vulcan 1500 Classic -
Fits all years Vulcan 1500 Classic (Carb & F.I.) -
$71.20 BUY THIS ITEM
--VN1500 Nomad---
-> #N739FF Front
Fender Trim, Vulcan 1500 Nomad -
FRONT tip of FRONT fender. Fits all years Vulcan 1500 Nomad (Carb & F.I.) -
$61.70 BUY THIS ITEM(PHOTO)
-> #N739RF Front
Fender Trim, Vulcan 1500 Nomad -
REAR tip of FRONT fender. Fits all years Vulcan 1500 Nomad (Carb & F.I.) -
$61.70 BUY THIS ITEM
-> #N720 Rear
Fender Trim, Vulcan 1500 Nomad -
Fits all years Vulcan 1500 Nomad (Carb & F.I.) -
$71.20 BUY THIS ITEM
--VN1600 Nomad---
-> #N739FF Front
Fender Trim, Vulcan 1600 Nomad -
FRONT tip of FRONT fender. Fits all years Vulcan 1500 Nomad (Carb & F.I.) -
$61.70 BUY THIS ITEM(PHOTO)
-> #N739RF Front
Fender Trim, Vulcan 1600 Nomad -
REAR tip of FRONT fender. Fits all years Vulcan 1500 Nomad (Carb & F.I.) -
$61.70 BUY THIS ITEM
-> #N7014 Rear
Fender Trim, Vulcan 1600 Nomad -
Fits all years Vulcan 1600 Nomad -
$80.70 BUY THIS ITEM(PHOTO)
--VN1600 Classic---
-> #N7013 Front
Fender Trim, Vulcan 1600 Classic -
Fits all years Vulcan 1600 Classic. 2pc Fender trim for front and
rear of front fender! -
$137.70 BUY THIS ITEM
-> #N7014 Rear
Fender Trim, Vulcan 1600 Classic -
Fits all years Vulcan 1600 Classic -
$80.70 BUY THIS ITEM(PHOTO)
--VN2000---
-> #N7011 Front
Fender Trim, Vulcan 2000 -
Fits all years Vulcan 2000. 2pc Fender trim for front and
rear of front fender! -
$137.70 BUY THIS ITEM(PHOTO)
-> #N7012 Rear
Fender Trim, Vulcan 2000 -
Fits all years Vulcan 2000. 1pc Fender trim for rear of rear fender! -
$80.70 BUY THIS ITEM(PHOTO)
Valve Stem Caps, Inflators, etc.
Valve Stem Covers
CO2 Inflator and Refills
Tire Stuff -
Valve Stem covers to add the finishing touch to your wheels, Air Pressure
Gauges to keep the pressure in check, and CO2 Inflators and Refills to get you back up and
rolling quickly!
-> Ribbed Valve Stem Covers- $8.96 (pair)
BUY
THIS ITEM
-> Eagle Valve Stem Covers- $13.46 (pair)
BUY
THIS ITEM
-> UltraFlate + CO2 Tire Inflator. Refills
tires instantly from a small CO2 container...easily stored in windshield bag or tool roll,
COMPACT Security for your tires! - $18.95
BUY
THIS ITEM(photo)
*Scootworks products are protected by patent pending,
US/International patents, and/or intellectual property rights. Reproduction without
express written permission from Scootworks is forbidden and will be prosecuted to the fullest
extent of the law.
