H4 Halogen Head Lamp Bulbs -
These are the most common lamps used in motorcycle headlights today. Pay close attention
to the shape of the two different lamp base (metal bottom section) in the photos to the left
when you select the bulb below for your application.
-> #BL-43STR Rainbow Strobe. Metal cage with glass prisms fits around H4 bulbs and adds multi-colored rainbow effect to
your headlight. Really gets the attention of oncoming vehicles! - $26.95 BUY THIS ITEM(photo)
H3 Base Overview
H3 Driving Light Replacements -
These are commonly found in the Yamaha factory driving lights, and are the units used in the
[RC] brand driving lights found on the Scootworks website. These are of the Halogen and Quartz
-> #70323 H3 Lamp, 35 watts,
Halogen type. This is the 'Xtreme White' version. It produces 70 watts of light while
consuming only 35 watts of energy. This lamp is the recommended replacement for lightbars
installed on smaller motorcycles where alternator output may be marginal for a pair of 50 watt
lamps. - $41.95 BUY THIS ITEM(photo)
Replacement Halogen Lights for Silver Bullets
Replacement Sockets for Halogen Lights
Lights for Silver Bullets -
Exact replacement lamp units for Kuryakyn Silver Bullet small halogen blinkers and
large driving lights.
-> #10-1624 50 Watt Halogen Bulb, MR11, 1.65" dia. lamp, fits 2-1/4" dia. driving lights and lamps [SC] - $9.86 NOTE: These also fit the
Show Chrome 2-542, 16-104, and 16-108 lights found in the 'Lighting' section of our catalog. BUY THIS ITEM
Replacement Sealed Beam
Lamps for Lightbars -
These sealed beam replacement lamps are 4-1/2" in diameter and fit most all
light bars that use 4-1/2" diameter sealed beam lamps including 'Fire & Steel', Cobra, CWI (the sealed beam
units), etc. Wiring attaches via two screw terminals on the rear of the lamp.
-> Sealed Beam replacement lamp, 4.5", Amber, 35 watts.
Wiring attaches via two screw terminals on the rear of the lamp. - $30.95 BUY THIS ITEM(photo)
-> Sealed Beam replacement lamp, 4.5", Clear, 35 watts.
Wiring attaches via two screw terminals on the rear of the lamp. - $26.95 BUY THIS ITEM(photo)
-> Sealed Beam replacement lamp, 4.5", Clear, 30 watts.
Wiring attaches via plug in terminals on the rear of the lamp. - $DISCONTIN BUY THIS ITEM(photo)
05-0092 Specialty Bulb for CWI lightbars
These specialty lamps are specific replacements for various unique lights and lighting
systems sold by Scootworks.
-> Replacement lamp for the CWI lightbar
that DOES NOT use a sealed beam lamp - $4.95 BUY THIS ITEM(photo)
#4804 (l) & #4803 (r)
Tru-Sphere L.E.D. Bulbs -
These are the best L.E.D. replacement bulbs on the market. Each bulb features 32
mega-bright red or 32 super bright amber L.E.D.s in a completely sealed package.
Tru-Sphere's unique design provides full hemispherical illumination; you won't believe
the improvement over an incandescent bulb. It's dimensions are the same as a standard
1156 incandescent bulb so it can be used as a direct replacement for those
-> #4801 Red L.E.D. Single Circuit
Bulb (ea) [replaces 1156] - $39.99 BUY THIS ITEM
-> #4804 Amber L.E.D. Single
Circuit Bulb (ea) [replaces 1156] - $DISCONTINU BUY THIS ITEM
Rotating LED Lamp, 1157
Rotating LED Lamp, 1157 -
This crazy lamp is a direct replacement for 1157's, and is usually used in rear tail lamps.
A ring of LEDs rotates in both directions, reversing direction every 2 second while in 'RUN'
mode. Provides a bright, attention grabbing light for your rear brake and run lights!