|
#CD8201-52 Lighted License Plate Frame
#9163 Ball-Milled License Plate Frame
#9165 Universal Lay Down License Plate Mount for fender mounted license plates
#9166 License Frame & Back Plate Set
#9167 Lighted License Plate Frame
#3-2 Smooth License Plate Frame
#52-692 LED Frame w/aux lights
#9168 Inspection Plate
Hog Jockey Inspection Sticker Plate
|
License Plate Frames/Trim and Inspection Plates -
Scootworks stocks these beautifully chromed License
plate trim frames, entire license plate mounts/assemblies, and inspection sticker mounts
from several vendors. The parts on this page are generic in design, meaning they can be
installed on most bikes. For side mount plates and tail cleanup/trim kits that are custom
fitted to your specific model, return to the main catalog page
and select the "Lighting -> Signals, LEDs, Tail Lights, Blinkers" link for your brand.
-> #CD8201-52 Lighted License Plate Frame -
Lighted License plate frame with brilliant white LED light strip for a clean illuminated look
to your motorcycle license plate. Frame dimensions: 7-3/16" x 4-1/4", Mounting holes: 5-3/4" x
2-13/16" (Fits Standard 7-3/16" x 4-1/4" License Plates). Mounting Hardware Included -
$39.95
BUY THIS ITEM
(PHOTO)
|
-> #9157 Curved License Plate Frame -
This cool curved license plate frame puts the finishing touches on our #4991 or #4992 Tombstone
Taillights. It accepts 4" x 7" plates and attaches to the existing holes on the #4991 and #4992
base plate. -
$64.39
BUY THIS ITEM
(PHOTO)
|
-> #9159 Lighted License Plate Frame - This
new, versatile Lighted License Plate Frame holds either small or large license plates, lights
the plate with brilliant L.E.D.s, and streamlines the back of your bike. Because the fasteners
that secure the frame to the back plate are installed from the rear, this frame can be
installed only on license plate mounts less than 8-1/4" wide allowing unobstructed access to
the back of the plate. This frame is perfect for use on our #9165 license plate holder below. -
$DISCONTIN
BUY THIS ITEM
(PHOTO)
|
-> #9163 Ball-Milled License Plate Frame - This
great looking new frame is finished in glistening chrome, and has ball-milled accents. - $28.45
BUY THIS ITEM
(PHOTO)
|
-> #9165 Universal Lay Down License Plate Mount - Most
stock license plate holders bear a strong resemblance to roadside billboards. If you'd like to
make yours a little less conspicuous, or are just looking for a cool slant on mounting, here's just the thing.
(NOTE* This is for fender-mounted license plate mounts, not those mounted on the turn signal bar) - $38.63
BUY THIS ITEM
(PHOTO)
Installation Instructions
|
-> #9166 License Frame & Back Plate Set - This baby
streamlines and cleans up your plate beautifully. You’ll find the all-stainless hardware
superior to any other brand. This is what counts years down the road. Our most popular basic
chrome frame! $19.31
BUY THIS ITEM
(PHOTO)
|
-> #9167 Lighted License Plate Frame - This chrome
die cast license plate frame incorporates two high intensity light bulbs that are wired
separately. Wire one each to your brake and tail lamp circuits or together for an extra bright
stop or running light...or use your imagination. -
$42.31
BUY THIS ITEM
(PHOTO)
|
-> #272364 'Back-Off' Lighted License Plate Frame - This chrome
license plate frame is one of our best sellers. It comes equipped with a bright array of RED L.E.D.s
that can be wired as aux. brake and run lights. Adds some much needed lighting to the rear of your
bike for low $$ and little effort! Easily installed, comes complete with installation instructions. -
$56.95
BUY THIS ITEM
(PHOTO)
|
-> #9171 Curved
Laydown License Plate Mount with Frame - This new, cool laydown license plate frame is curved to
follow the contour of your rear fender. Universal mount. Comes with curved chrome backing plate with
mount, beautifully chromed frame and hardware. (NOTE* This is for fender-mounted license plate mounts, not those mounted on the turn signal bar) -
$67.15
BUY THIS ITEM
(PHOTO)
|
-> #3-2 Smooth
License Plate Frame - Chrome steel frame with acrylic plate
cover and stainless steel back plate. Measures 4-1/2" x
8-1/8" to hold most license plates. - $DISCONTINU
BUY THIS ITEM
(PHOTO)
|
-> #52-692 LED License Plate
Holder - Accommodates 7” x 4” to 8-1/2” x 4-3/8” plate size.
Die cast chrome plate holder incorporates 3 LED light strips. The top is and can be used as
auxiliary running or brake light. The two side amber lights can be used as auxiliary turn
signals. Mounts to most license plate holders. Outer frame measures 9-1/8" l x 5-1/8" h x 3/4"
d - 1" width border. Clear acrylic front panel to protect license plate. - $107.96
BUY THIS ITEM
(PHOTO)
|
-> #59000 Fluted
License Plate Frame - Sturdy CNC machined chrome steel
license plate frame from Cobra adds style to your dreary license plate area.
- $42.27
BUY THIS ITEM
(PHOTO)
|
-> #9168 Inspection Plate - This small chrome
display bracket mounts cleanly in any location dictated by local or state regulations. Now you
don't have to mess up a nice paint job, chrome surface, or fork leg with some cheesy government
sticker! Universal fitment, ball milled, chromed to perfection. $38.63
BUY THIS ITEM
(PHOTO)
|
-> KustomWerks Inspection Plate -
A Scootworks 'in-house' best seller!! Manufactured and distributed locally, this chrome inspection
sticker plate is the best 'bang for the buck' around. We've installed loads of these things in our
own shop, and they've sold like mad in our store front. Now, we're offering this same great deal
to bikers worldwide via our Scootworks website. Easily installs on your motorcycle, and keeps the
state inspection sticker OFF of your fork leg and frame! $15.95
BUY THIS ITEM
(PHOTO)
|
-> Chrome License Plate Backing -
Another Scootworks original for your cruiser! This beautifully chromed universal licence plate
backing is compatable with standard motorcycle plates issued in the U.S. It can be drilled and
adapted to most any motorcycle license frame, and will replace that unsightly black plastic or
painted metal panel behind your license plate. A nice piece of chrome, to add more detail to
your cruiser...for only a few bucks! $9.45
BUY THIS ITEM
(PHOTO)
|
|
#3160 Lone Eagle Frame
#3161 Swept Eagle Frame
|
American Eagle Chrome License Frames -
These slick license frames are real attention grabbers,
paying tribute to the American Eagle and the American Lifestyle. They carry the logo:
'Land of the FREE, and Home of the BRAVE' and are adorned with the American flag insignia.
These frames are a beautiful addition to your bike, and show your American pride!
-> #3160 Lone Eagle License Plate Frame -
Fits Standard 7" x 4" License Plates. Mounting Hardware Included -
$57.95
BUY THIS ITEM
(PHOTO)
|
-> #3161 Swept Eagle License Plate Frame -
Fits Standard 7" x 4" License Plates. Mounting Hardware Included -
$57.95
BUY THIS ITEM
(PHOTO)
|
|
Flame Light Accent for Sidemount "D" above...
|
Cateye
and Sidemount Lights- Here is a great
selection of cateye taillights to add a whole new look to your cruiser, and
helps increase the visibility of your bike with arrays of super bright LED's
(on most models).
Models A, B & C are all
manufactured of billet aluminum and chrome plated for a beautiful
finish. Model D is manufactured from chrome plated steel. Model E is manufactured from
polished stainless steel (though most all of the mount is hidden when installed). All include
hidden clear lamps to illuminate license plate.
- (A), (B), & (C sidemount)
- Can be mounted to axle bolt, fasteners on
swingarm or rear differential, etc via mounting arm with hole (seen in picture), and are
of a generic mounting style to allow custom installation to a wide variety of motorcycles.
These may require modification to your LH rear wheel spacer for installation.
- (C Fendermount)
bolts directly to your rear fender.
-
(D) is designed to work on the LH lower shock mounting bolt of most cruisers
and is more easily adapted to axle mount due to the thinner steel mounting tab.
- (E) - Mounts under rear
fender on Honda Spirit 750 and many other bikes with short, custom styled or 'bobbed'
fenders. Can be modified to fit other bikes as well.
-> (A) Side Mount LED
Billet Curved Taillight, Vertical Mount License Plate (Chrome)- $170.95
BUY
THIS ITEM |
-> (B) Side Mount LED
Billet Straight Taillight, Vertical Mount License Plate (Chrome)- $120.00
BUY
THIS ITEM |
-> (C)
Billet horizontal Fender-mount License Plate with LED Cateye (Chrome)- $123.45
BUY
THIS ITEM |
-> (C)
Billet Horizontal Side-Mount License Plate with LED Cateye (Chrome)- $153.85
BUY
THIS ITEM |
-> (D) Side mount
Taillight, Chrome Plated Steel w/Chrome License Plate Frame
(Vertical) and incandescent Cateye Lamp. 1/2" dia mtg hole for LH lower shock bolt, swingarm bolt, or can be enlarged
for installation on axle. - $105.00
BUY
THIS ITEM
(Installed on Spirit 750)
|
-> (D) Side mount
Frame Only (without light or light mount), Chrome Plated Steel w/Chrome License Plate Frame
(Vertical). 1/2" dia mtg hole for LH lower shock bolt, swingarm bolt, or can be enlarged
for installation on axle. - $72.00
BUY
THIS ITEM
(Installed w/o Light)
(Installed on Axle of VLX)
(Installed on V-Star 1100)
|
-> (D1) Side mount
Taillight, Chrome Plated Steel w/Chrome License Plate Frame (vertical)
and thin incandescent Cateye Lamp mounted on SIDE. 1/2" dia mtg hole for LH lower shock bolt, swingarm bolt, or can be enlarged
for installation on axle. NOTE** Thin cateye can also be installed on top of license frame with existing hardware.- $105.00
BUY
THIS ITEM
(photo)
(photo)
|
-> (D2) Side mount
Taillight, Chrome Plated Steel w/Chrome License Plate Frame (vertical)
and Skull Cateye Lamp mounted on top. 1/2" dia mtg hole for LH lower shock bolt, swingarm bolt, or can be enlarged
for installation on axle. NOTE** Skull cateye can also be installed on side of license frame with existing hardware.- $108.95
BUY
THIS ITEM
(photo)
|
-> Flame Accent for Cateye Light on Vertical Sidemount
"D" - $42.84
BUY
THIS ITEM
(photo)
|
-> (E) Under Fender Mount
LED Taillight for Spirit 750 chain/belt drive models (Can be modified to fit other bikes)- $123.00
BUY
THIS ITEM
(Installed on Spirit 750)
(Installed on VLX 600)
|
-> (F) Side Mount LED
Billet Curved Taillight w/Diamond shaped LED lamp, Vertical Mount License Plate (Chrome)- $189.95
BUY
THIS ITEM
(photo)
|
Note: Be sure to check
your local laws for the legality of vertical license plate mounting in your locale.
|
|
|
#9198 Kuryakyn Curved Lay-Back License Plate Frame -
Add the Curved Tip-Back License Plate Frame and smooth out the
back of your fender. With 8 degrees of angle and a curved frame, this chrome beauty holds a
4” x 7” plate and bolts directly to your stock OEM license plate mount.
|
|
|
Kuryakyn Curved License Plate Mount -
The new Street Glide is way cool, but this bolt on gracefully
curved license plate mount makes a big difference. Rid yourself of the stock black bracket and
the flat look. No Drilling – No need for a new license plate light. Just bolt it on and go!
Fits '06-'08 Street Glide and '07-'08 Screamin' Eagle Road King.
|
|
|
Cleanup Kit for the Kawasaki Mean Streak - Replace
your bulky original equipment turn signal mounts and license plate framing with this sleek looking
chrome beauty! Brings your rear turn signals in nice and tight, while providing a cool chrome
fender trim and slanted license plate mount. FITS all Kawasaki Mean Streak 1500's and 1600's
|
|
Cleanup kit for VTX1300R & VTX1800R
|
Cleanup kit, VTX1300R & VTX1800R - Replace
your OEM license plate mount with this trim, sleek billet part. Gets your license plate
close to the fender, and removes all of that crazy sheet metal bracketry. FITS all years of VTX1300R & VTX1800R.
|
|
Cleanup Kit for Aero 750
|
Lighted Wrap-around License Frame for Aero 750 - Replace
your bulky original equipment licence mount on the Aero 750 with this cool LED lighted chrome license frame assembly.
FITS: Honda 750 Aero, all years.
|
|
License Plate Mounted Helmet Lock
|
License Plate Mounted Helmet Lock -
An awesome way to relocate your helmet lock to a practical location, or add a helmet lock to your
bike in an easy to reach location. Fits most any motorcycle, and comes complete with hardware
needed for installation.
|
Universal Flasher Relocator Bar
Chrome License Plate Lighting Bracket
|
Rear Signal
Relocator Bars & Mounts- Moves
the rear flashers to the license plate bracket.
-> #05-201 Universal Flasher Relocator Bar.$13.15
BUY THIS ITEM
|
-> #4247 Universal Chrome License Plate mounted Lighting bracket. $36.79
BUY THIS ITEM
|
|
|
License Plate Mounted Flagpole/Flag
|
License Plate Mounted Flagpole/Flag -
This is the perfect answer for those of you who are having trouble locating a flag pole and
flag that fits your bike correctly. Easy to install & adjust. Fits most any motorcycle, and comes complete with
4-1/2" x 8-1/2" American Flag, 12" chrome staff, and hardware
needed for installation.
|
|
Chrome License Plate Bolts
|
Chrome License Plate Bolts -
The chrome button head is a M6 x 16 w/chrome acorn nut. The Bullet
bolt is a bullet shaped chrome plated cone with a 1/4-20 stud, lockwasher, and nut. The Skull
bolt is a chrome plated skull with a 1/4-20 stud, lockwasher, and nut. They are sold
in singles or multiples of 2 or 4. If you want other amounts, simply click on the single 'Buy One'
link, and correct the final number when you go to your shopping cart at checkout.
|
<- VISIT
