->
#4029 (heel shift/brake pedal cover)
FITS:
KAWASAKI:
REAR BRAKE: Vulcan 500, 750, 900 Custom
HEEL SHIFTER: Vulcan 900 Classic & LT, Vulcan 1500/1600 Classic, Vulcan Nomad 1500/1600, Vulcan Drifter 800/1500
$29.99
BUY
THIS ITEM
->
#4034 (shifter peg cover)
For oval shifters with a width of 5/8" or less. Recommended for use on all 2000-earlier models with an oval shifter, including oval heel-toe applications.
$19.99
BUY
THIS ITEM
->
#4036 (shifter peg cover)
FITS:
KAWASAKI: Vulcan 500,750 and Drifter 800. For oval shifters with a width greater than 5/8". Recommended for use on all 2001+ models with an oval shifter, including oval heel-toe applications.
$19.99
BUY
THIS ITEM
->
#4045 (brake pedal cover)
FITS:
Kawasaki: Mean Streak '02-'05. Looks like the 4029.
$34.99
BUY
THIS ITEM
->
#7518 FLAMIN' Brake Pedal Cover
FITS:
Kawasaki: All Vulcan vn2000 & 900 Classic, '96+ Vulcan 1500 (except Mean Streak), '05+ Vulcan 1600 Classic. Pads are physically retained, not glued on!
$39.99
BUY
THIS ITEM
(PHOTO)
->
#8004 (universal shifter peg)
Like the 8021 below, but only 2-1/4" long. We use these in our shop for the beefiest and coolest metric shifter
peg ever. Requires cutting off the OEM peg, drilling/tapping to 5/16-24 for installation. Info on
installation can be seen
HERE and
HERE.
$16.99
BUY
THIS ITEM
->
#8021 (universal shifter peg)
This peg is 2-3/4" long. We use these in our shop for the beefiest and coolest metric shifter
peg ever. Requires cutting off the OEM peg, drilling/tapping to 5/16-24 for installation. Info on
installation can be seen
HERE and
HERE.
$18.99
BUY
THIS ITEM
(PHOTO)
->
#1665 SUPER-Shift peg (universal shifter peg)
This monsta is 3-3/4" long! We use these in our shop for the beefiest and coolest metric shifter
peg ever. Requires cutting off the OEM peg, drilling/tapping to 5/16-24 for installation. Info on
installation can be seen
HERE and
HERE.
$15.94
BUY
THIS ITEM
(PHOTO)
->
#8027 (brake pedal cover)
FITS:
KAWASAKI: Vulcan 1500A, 1500 Classic ('96-'00), Nomad 1500, Vulcan Drifter 800/1500 Brake Pedal (all).
Requires drilling 1 hole.
$32.99
BUY
THIS ITEM
(PHOTO)
->
#8044 (universal brake pedal cover)
We use these in our shop for a great looking and robust metric brake pedal
cover, especially on applications where no cover of this type exists. Requires drilling one hole for installation.
Will fit on most any pedal that is 2-3/8" wide x 1-3/4" tall or less. You can also trim the flat metal
pad on the OEM brake pedal down to fit into the 2-3/8" wide x 1-3/4" tall recess on the bottom of this
pedal cover, as we do on the Kawasaki Mean Streak. On textured and slightly curved pedals (like on
the Honda VT-600 VLX), we use a grinder to flatten the face of the OEM pedal, than bolt this beauty
on. A very universal part to work with! You can also see some info on installation
HERE and
HERE.
$32.99
BUY
THIS ITEM
(PHOTO)
->
#8850 (brake pedal cover)
FITS:
KAWASAKI: Vulcan 1500A, 1500 Classic, 1500/1600 Nomad ('98-'04), 1600 Classic ('03-'04), Vulcan Drifter 800/1500 Brake Pedal (all)
$32.99
BUY
THIS ITEM
->
#8851 (shifter peg cover)
FITS:
KAWASAKI: Vulcan 800 (A, Classic); Vulcan 900 Custom & Classic Toe Shift Peg; Vulcan 1500 A/B/C, Vulcan 1500/1600 Classic Toe Shifter, Nomad (all), Mean Streak, Vulcan Drifter 1500 Toe Shifter (all)
$19.99
BUY
THIS ITEM
->
#8857 (brake pedal cover). Looks same as 8027 above.
FITS:
KAWASAKI: Vulcan 900 Classic, Vulcan 1500 ('01+),
Vulcan 1600 Classic (all), Vulcan 1500/1600 Nomad, VN2000 (all).
Requires drilling 1 hole.
$32.99
BUY
THIS ITEM
(PHOTO)
->
#81-112 (brake pedal cover)
FITS:
KAWASAKI: Vulcan 1500 & 1600 Mean Streak
$35.96
BUY
THIS ITEM
| 
<- VISIT
