Scootworks NEW StakRisers for select Triumph Motorcycles. Our
newest pullback riser extension raises your handlebars 1-1/2" (37mm) and has a pullback of 2" (50mm). StakRisers are
designed to help reduce arm and back strain by letting you ride in a more upright position.
These work with TRIUMPH
factory risers that have a base diameter of approximately 1-1/2". **NOTE** Triumph has used different risers within the
same production model, so measure your riser at the base (near the top of your triple tree) to insure that is ROUND,
and that it is approximately 1-1/2" in diameter. If it is a different diameter, check our other Triumph risers for the
diameter needed on your bike.
StakRisers utilize the stock Triumph handlebar risers and factory riser cap or bridge. Just install
the new StakRisers between your existing riser and triple tree. View the photos above for reference.
Scootworks StakRisers fit the following Triumph Motorcycles: Legend 900. Note: Re-routing of the cables and hoses may be
required depending on your motorcycle. Since these work with the OEM mount, they will work on 7/8" and 1" handlebar
applications. Fitment & testing for other models is currently underway. Contact support@scootworks.com to participate
in our prototype program.
->
StakRisers SWR-15 for Triumph Legend
$79.99
BUY
THIS ITEM
Scootworks NEW StakRisers-I for select Triumph Motorcycles. Our
newest pullback riser extension raises your handlebars 1" and has a pullback of 1-3/4". StakRisers are designed to help
reduce arm and back strain by letting you ride in a more upright position.
These work with TRIUMPH factory risers that have a base diameter of approximately 1-1/4". **NOTE** Triumph has used
different risers within the same production model, so measure your riser at the base (near the top of your triple tree) to
insure that is ROUND, and that it is approximately 1-1/4" in diameter. If it is a different diameter, check our other
Triumph risers for the diameter needed on your bike.
Scootworks NEW StakRisers-II give you more pullback and rise than our regular StakRisers. These pullback riser extensions
raises your handlebars 1-3/4" and has a pullback of 2-1/2". StakRisers II are designed to help reduce arm and back
strain by letting you ride in a more upright position. These work with TRIUMPH factory risers that have a base diameter
of approximately 1-1/4". StakRisers utilize the stock Triumph handlebar risers and logo'd riser bridge or caps. Just
install the new StakRisers between your existing riser and triple tree. View the photos above for reference.
Scootworks StakRisers and StakRisers-II fit the following Triumph Motorcycles: Bonneville America, Adventurer, Thunderbird, & Speedmaster. Note:
Re-routing of the throttle cable may be required with the StakRiser II's depending on your motorcycle. Since these work
with the OEM mount, they will work on 7/8" and 1" handlebar applications. Fitment & testing for other models is currently
underway. Contact support@scootworks.com to participate in our prototype program.
->
StakRisers-I SWR-18 for America, Adventurer, Thunderbird, & Speedmaster
$79.99
BUY
THIS ITEM
->
StakRisers-II SWR-17 for America, Adventurer, Thunderbird, & Speedmaster
$79.99
BUY
THIS ITEM
Scootworks NEW StakRisers-II for select Triumph Motorcycles. Our
newest pullback riser extensions provide rise & pullback for your OEM mounts. **NOTE** Triumph has used different risers
within the same production model, so measure your riser at the base (near the top of your triple tree) to insure that is
ROUND, and that it is approximately 1" in diameter. If it is a different diameter, check our other Triumph risers for the
diameter needed on your bike.
StakRisers-II raises your handlebars 1-1/2" (37mm) and has a pullback of approximately 2" (50mm). StakRisers are designed
to help reduce arm and back strain by letting you ride in a more upright position. These work with TRIUMPH factory
risers that have a base diameter of approximately 1". StakRisers™ utilize the stock Triumph handlebar risers and logo'd
riser cap (if supplied). Just install the new StakRisers between your existing riser and triple tree. View the photos
above for reference. Scootworks StakRisers fit the following Triumph Motorcycles: Bonneville T-100, Bonneville Std,
& Bonneville SE. Note: Re-routing of the cables and hoses may be required depending on your motorcycle. Since these
work with the OEM mount, they will work on 7/8" and 1" handlebar applications.
Cable rerouting (if needed) is easily accomplished by the following: - Lift front so wheel is off ground and spins freely -
Loosen M8 Pinch bolts on in top tree - Remove 30mm hex bolt from center of tree - Loosen upper windshield hardware if
equipped - Lift top tree up, move throttle cables, brake hose, & clutch cable behind tree - Reinstall top tree &
tighten - Rotate handlebar fully right and loosen throttle cable freeplay adjustments on throttle cables so throttle
rotates freely. - Go ride!
Now available in Matte Black!
->
StakRisers-II SWR-19 (brushed aluminum) for Bonneville Standard, T100 & SE
$79.99
BUY
THIS ITEM
->
StakRisers-II SWR-19B (Matte Black) for Bonneville Standard, T100 & SE
$79.99
BUY
THIS ITEM
*Scootworks products are protected by patent pending,
US/International patents, and/or intellectual property rights. Reproduction without
express written permission from Scootworks is forbidden and will be prosecuted to the fullest
extent of the law.