A pic of the CruzPac w/WidePad installed


Pic of CruzPac on Vulcan 800 Classic


Closeup of CruzPac on Vn800...


A pic of the CruzPac w/Studded CruzPad installed


A pic of the CruzPac w/drop in bag

Scootworks CruzPac^tm- After much feedback from customers, developmental work, experimentation, prototype fabrication, and testing... it's finally here! The Scootworks CruzPac was designed by us for fitment on mid-size cruisers. Many of our customers have been asking for a smaller trunk for bikes that would retain the classic styling of our SuperTrunk. Our CruzPac^tm fits the bill, coming in at approximately 30% smaller than the SuperTrunk. While most smaller tourpacks have a more round 'Euro-styling', ours has the classic cruiser styling of our larger trunk, yet in a smaller package.

            More Photos ->  (pic #1)  (pic #2)  (pic #3)  (pic #4)  (pic #5)  (pic #6)  (pic #7)  (pic #8)  (pic #9)  (pic #10)  (pic #11)  (pic #12)

Pictures 5, 6, & 7 above show the CruzPac with a backrest installed. The CruzPad in pics 5 & 6 matches the typical driver backrest pads found on many cruisers, today. it is available in plain or studded.

The CruzPac measures approx. 17-1/2" wide at the front and 15-1/2" wide at the rear, 11-1/4" tall at the front and 9-3/4" tall at the rear, and 14.5" front-to-back. The proportions of this trunk make it perfect for the mid-size cruisers like: Vulcan 800/900, Honda ACE750/VT1100/VTX1300R, Suzuki Volusia 800/C50, Yamaha 650/1100/1300, and others. Our new FLAT BOTTOM is also reinforced to make installation on luggage racks or installation on our mounting systems found at the bottom of the page, a snap.

The Scootworks CruzPac^tm is supplied with all the features of the SuperTrunk, including dual locking latches, heavy-duty chrome plated hinges, installed lid restraint, full perimeter lid seal, reinforced bottom, gelcoat outer finish, and top quality hand-laid fiberglass construction!

You can also find more pics and info in our new site HERE.

Trunk/Saddlebag Liner Kit
Can also be used to line hard saddlebags, tour packs, toolboxes or anything that needs a custom-fitted, permanently attached soft liner. Material is pliable and stretchable to fit into tight corners and over odd shapes. Paper liner allows drawing out patterns. Can be cut with scissors and trimmed with a utility knife after installation. Adhesive allows repositioning until it is rubbed down, then it really sticks! Measures 18” x 36”.

The new flat bottom on our SuperTrunk & CruzPac works great with our mounts, and is easily fitted to luggage rack mounting and OEM trunk mounts.


Available with plain or studded passenger backrest/armrest combo!


Shipped in gelcoat finish, ready for sanding and paint in your color. NOTE- Now shipped in GLOSS BLACK gel coat!


Beautiful lines, lots of surface area for mounting lights, antenna brackets, etc.

Scootworks SuperTrunk III- Our newest Full-Size motorcycle trunk design! Measures approx. 23" wide, 17.5" front-to-back, and 13" tall. This trunk is proportioned similar to the Harley-Davidson tour packs found on the Electroglide-series of motorcycles. Add a spacious Tour Pack to your motorcycle with the Scootworks SuperTrunk III. The Scootworks SuperTrunk III comes in a durable BLACK gel-coat finish, ready for prep and color matching to your motorcycle. Features lockable latches, full perimeter lid gasketing, compatable with all H-D and most aftermarket trunk mounts, and instruction manual. This motorcycle trunk is compatable with all readily available Harley-Davidson accessories to make customization a snap. Our new FLAT BOTTOM is also reinforced to make installation on luggage racks or installation on our mounting systems found at the bottom of this page, a snap. As seen in photo link #4 below, it even accepts aftermarket speaker pods with ease! You can also find more pics and info in our new site HERE.

Trunk/Saddlebag Liner Kit
Can also be used to line hard saddlebags, tour packs, toolboxes or anything that needs a custom-fitted, permanently attached soft liner. Material is pliable and stretchable to fit into tight corners and over odd shapes. Paper liner allows drawing out patterns. Can be cut with scissors and trimmed with a utility knife after installation. Adhesive allows repositioning until it is rubbed down, then it really sticks! Measures 18” x 36”.

Note:
1 kit will cover the bottom of the trunk
2 kits will cover the bottom and sides of the trunk
3 kits will cover the bottom, sides and lid of the trunk

Available: Lift-out Trunk Bag for the SuperTrunk!

Early version of Scootworks SuperTrunk II on Nomad 1500 with optional top rack.


Scootworks SuperTrunk III-style tour pack on Kawasaki Nomad 1500


SuperTrunk & Passenger Backrest w/armrests


The SuperTrunk is compatable with aftermarket Speaker Pods!

Motorcycle Trunk Mounting systems - While our trunks are designed with a flat, reinforced bottom for easy mounting on luggage racks and other OEM trunk mounts, Scootworks also provides trunk mounting systems for some select motorcycle makes and models. You can also find more trunk mounts in our new site HERE. Below are the trunk mounts we carry: