Billet Mirrors- SCORPION mirrors are HOT! One piece CNC machined billet mirrors with beautiful chrome plating. The front side of the mirror is flat. The flat glass in these mirrors have a light blue tint for a totally different look. No adapters required, comes complete with all mounting hardware. This is a new item here at Scootworks! Available in teardrop or rectangle shapes. With special left hand thread for Yamaha right mirror.

Magnum™ and Ellipse Mirrors by Kuryakyn- Called 'Magnum™' because of their rugged design. Every component has been beefed up. Unlike others' flimsy mirrors, these feature sturdy stems and an oversized adjuster ball that holds its position under the toughest conditions. Available in two head sizes: approximately the same square-inch head size as stock; or 20% smaller than stock. The Ellipse Mirrors feature convex glass to minimize blur from vibration. All require the mounting hardware sold separately below.

Superman Micro, fluted


Teardrop w/milled back


Custom Slotted w/fluted back


Countour Mirror


Fireman Mirror

Custom Mirrors from KW - With styling typically found only on mirrors from Arlen Ness and the like, these new cool custom mirrors from KW are making the scene quickly. Click on the photo links beside each item below to see these slick new styles! (**NOTE** Requires the #1445 mounting hardware at the bottom of this section)

Signal Light Mirrors- This Küryakyn original looks good coming and going. From the drivers seat, they are a functional, great looking custom mirror. A heavy duty locking mechanism and swivel ball keep these mirrors adjusted just where you want them. Looking at the mirrors from the front, you’ll notice a bank of L.E.D.’s that work as a running light and a super bright auxiliary turn signal. Unlike other lighted mirrors, these lights only face forward so glare is not a factor. The life of this light source will be several times that of incandescent bulbs. The necessary load equalizer is included with this kit.

Chrome Cable Covering


Spring-style Chrome Hose/Wiring Covering

Chrome Cable Covering- This synthetic Chrome Cable Covering is available in various sizes, allowing it to hide most electrical accessory lighting wiring in chrome. Synthetic non-conductive composition makes it great for covering electrical wiring.

The Spring-type covering (2nd photo on left) is similar to that found on the hydraulic hoses of many motorcycles as shipped from the factory. Our covering is chrome plated to a high luster, unlike most of the OEM covering. It can also be used on electrical wiring, and it's steel composition holds shape well in tight bends. This is packaged in packs of 3 pieces, each being 19-1/2" long and 5/8" in diameter.

Chrome Handlebar Wire Clips


Chrome 7" Zip Ties, 10 pack

Chrome Handlebar Wire Clips and Ties- These clips are designed to snap into the holes on the underside of your handlebars to cleanly route your wiring and/or cables from the switch heads and controls down towards the triple trees. They can be installed in smooth bars by drilling holes for them to snap into, or simply replace the black plactic guides already installed on your bars. The wire ties are made of nylon, chrome plated, and are 7" long zip ties in a 10-pack.

Chrome Handlebar Cable/Hose Clamps

Chrome Handlebar Cable & Hose Clamps - Scootworks sources these in large quantities and is passing the savings along to you! You'll not find a better deal on chrome throttle cable, clutch cable, and hose clamps. These CNC machined and chromed beauties are just what the doctor ordered when you're putting the finishing touches on the details of your bars...like cleanly routing your cables! These fit 1" and 1-1/4" handlebars and frame tubes (depending on the model selected). Grab a handful and get your cable routing cleaned up today!

Chrome Switch Heads & Covers for Yamaha!

Chrome Handlebar Control Head Covers and Replacements- Cover up unsightly housings and create a smooth, full-custom look with these chrome switch head covers or replacement switch heads. Clamshell-design chrome covers. They install easily and encapsulate the stock housings without interfering with control functions. Simply install over the top of your existing switch heads, no need to tinker with the internal wiring or switches! They’re an awesome accent to ISO-Grips and our custom mirrors. Our switch head HOUSINGS found below are a complete replacement for the switch head housing, not a cover!

-> #9117 Switch Head Cover - FITS: V-Star 650 Classic & Silverado (all years) $64.39  (pair) BUY THIS ITEM     Installation Instructions

-> #63-136 Switch Head Housings - FITS: V-Star 650 Classic & Silverado (all years). $89.96  (pair) BUY THIS ITEM

-> #9112 Switch Head Cover - FITS: V-Star 650 Custom (all years) $64.39  (pair) BUY THIS ITEM     Installation Instructions

-> #9113 Switch Head Cover - FITS: V-Star 1100 Custom (all years) $64.39  (pair) BUY THIS ITEM     Installation Instructions

-> #63-617 Switch Head Housings - FITS: V-Star 1100 Custom (all years). $89.96  (pair) BUY THIS ITEM

-> #9114 Switch Head Cover - FITS: V-Star 1100 Classic & Silverado (all years) $64.39  (pair) BUY THIS ITEM     Installation Instructions

-> #63-614 Switch Head Housings - FITS: V-Star 1100 Classic & Silverado (all years). $89.96  (pair) BUY THIS ITEM

-> #63-302 Switch Head Housings - FITS: V-Star 1300 (all). $89.96  (pair) BUY THIS ITEM

-> #9112 Switch Head Cover - FITS: Road Star 1600/1700 (all years), and Warrior (all). $64.39  (pair) BUY THIS ITEM     Installation Instructions

-> #81-110 Switch Head Housings - FITS: Road Star 1600/1700 (all years), and Warrior (all). $89.96  (pair) BUY THIS ITEM

Front Master Cylinder Reservoir Covers, Reservoir Risers, and Switchbox Assemblies-

Wide Style Levers in Chrome!

Chrome Brake and Clutch Lever Sets - These chrome levers are a beautiful addition to your bike. The 'Wide Style' levers are wider and more comfortable than stock. The 'Smooth Blade' levers are standard lever widths, and add a sleek look to your handlebar controls. Easy to install, inexpensive, and beautifully chromed. These levers are a great way to add a bit more sparkle to your handlebars and improve comfort at the same time!

Foam Lever Grips


Leather Lever Fringe (BBP)

Lever Accessories - Foam-based lever grips (padding) and lever wraps are manufactured by Show Chrome. They slide over the brake and clutch levers, providing gentle comfort for those long runs.

These durable lace-up lever covers/fringe are made of quality Black Leather by BBP. These lever wraps are 1-3/4" x 4-1/2" wide add extra comfort and style to any Cruiser. Fringe measures 12" long, and can be easily trimmed to any length with scissors.