Chrome Wheel Covers
These wheel
covers are designed to cover spoke wheels and are made of heavy sheet
steel with a beautiful chrome finish. Provides that cool 'solid wheel look' for a fraction of the cost of
a wheel replacement! Solid performers in the field, we've NEVER had a single complaint about loosening or noise.
-> V-Star 650/1100 Classic
and 650 /1100 Silverado Front Wheel Cover (all years)- $232.35 BUY
THIS ITEM
-> #62-108L Stepped and Terrace design-
FITS: LEFT SIDE of V-Star 1100 Custom (not Classic!), Royal Star, Road Star 1600/1700- $62.96 BUY
THIS ITEM(PHOTO)
-> #62-108R Stepped and Terrace design-
FITS: RIGHT SIDE of V-Star 650 Custom and Classic, V-Star 1100 Custom (not Classic!),
Royal Star, Road Star 1600/1700- $62.96 BUY
THIS ITEM(PHOTO)
-> #63-605 Stepped and Terrace design-
FITS: BOTH SIDES of V-Star 1100 Classic- $125.96 BUY
THIS ITEM(PHOTO)
Fluted Front Caliper Accent
Brake Caliper Accents-
These caliper accents are in a fluted designs. Easily attached
in minutes, to give your brake calipers an added bit of detail.
FRONT Caliper Accent, Fluted
- Fits Yamaha V-Star 1100 Classic/Custom ('99+) - $64.35 (pair)
BUY THIS ITEM(photo)
FRONT Caliper Accent, Fluted
- Fits Yamaha Road Star 1600 & Road Star 1700 (all) - $DISCONTIN (pair)
BUY THIS ITEM(photo)
REAR Caliper Accent, Fluted
- Fits Yamaha Road Star 1600 & Road Star 1700 (all) - $32.15 (each)
BUY THIS ITEM(photo)
Chrome Banjo Bolt and Brake Bleeder Covers
#2018 Bleeder cover- This little gem is the perfect compliment to the Banjo Bolt Cover below. Easily installed over the stock rubber cover, this piece provides a nice detail when dressing up brake calipers on metric cruisers. - $10.11 BUY THIS ITEM(PHOTO)
#2013 - Same as #2018 above, except sold in pairs for more savings! - $18.39 BUY THIS ITEM(PHOTO)
#2015 Fluted Banjo bolt cover- This trick little cover "erases" nasty looking zinc or cad plated brake line fittings that are very prone to rust or corrosion. They also add finishing detail to Master Cylinder Covers and Caliper Covers. Fits most cruisers with banjo fittings requiring a 12 mm wrench. - $14.71 BUY THIS ITEM(PHOTO)
#1-319 Smooth Billet Bleeder bolt cover- Smooth chrome cover is easy to install! - $11.35 BUY THIS ITEM(PHOTO)
#1-318 Smooth Chrome Banjo bolt cover- Smooth chrome cover is easy to install! - $13.46 BUY THIS ITEM(PHOTO)
Chrome
Front Axle Covers - These chrome covers
clean up the nasty RH side axle end of V-Star 650s and 1100s. Easy to install, snaps on
in just seconds!
#63-117 R.H. Side Front Axle Cap. Fits
V-Star 650/1100 Custom and Classic - $15.26 BUY
THIS ITEM
Roadstar Swingarm Cover
Swingarm Covers & Extensions-
-> #8262 Roadstar Swingarm Covers - An easy way to make your
swingarm sparkle with chrome. Quick installation, and fits all Roadstar
models and years, except Warrior. NOTE* Requires 1" or more of clearance between right side axle
nut and exhaust at all times - $156.39 BUY THIS ITEM(photo)
-> #8664 Roadstar Swingarm Covers - Like 8262 above,
works with OEM (stock) exhaust. Quick installation, and fits all Roadstar
models and years, except Warrior - $156.39 BUY THIS ITEM(photo)
-> #8661 Roadstar Swingarm Extension - Covers lower tube of RH swingarm,
for installations where shorter exhaust expose this area, or for those who simply have to have
ALL the chrome! Quick installation, and fits all Roadstar models and years, except Warrior - $29.43 BUY THIS ITEM
-> #8660 Roadstar Swingarm Tube Covers - Works with 8229 Phantom Covers below, to make the full 8262 cover
set above. For those who already have the Phantom covers, and want to convert to full chromage mode! Fits all Roadstar models and years, except Warrior - $DISCONTIN BUY THIS ITEM(instructions)
Chrome
Rear Axle 'Phantom' Covers - These awesome rear axle/hub covers
work wonders on the swingarms of V-Star 650s, 1100s, and Roadstars. They turn a hodge-podge of
fasteners, frame tubes, axles, hubs, etc. into one smooth sculpted chrome cover. Combine
these with our new Boomerang frame covers and you'll have one
seriously hot lookin' scooter on your hands!
-> #8229 Roadstar (pair) Phantom Covers, all years. NOTE* Requires 1" or more of clearance between right side axle
nut and exhaust at all times - $77.29 BUY
THIS ITEM
-> #8665 Roadstar (pair) Phantom Covers, all years. Like 8229 above,
works with OEM (stock) exhaust. - $73.59 BUY
THIS ITEM
Front Axle Plugs and Covers
Front Axle Covers-
-> RH Front axle cover for
V-Star 650 (all). Easy to install! -
$14.36 (pair) BUY
THIS ITEM(photo)
-> RH Front axle cover for
V-Star 1100 (all). Easy to install! -
$14.36 (pair) BUY
THIS ITEM(photo)
-> RH Front axle cover for
Royal Star Ventura (all). Easy to install! -
$14.36 (pair) BUY
THIS ITEM(photo)
Eagle Front Fender Ornament
This bird is the word! Your front fender will take on
new life with this majestically sculpted chrome and gold eagle with amber lighted
eyes. One screw and the top comes off for easy bulb replacement. - $42.31 BUY THIS ITEM(PHOTO)
Studded Mudflap
Mud Flaps and Mud Guards
#DL-Flap
Studded leather mudflap customized by Scootworks to include
a cool Mustang chrome concho. Great way to dress up your fender while stopping
mud and stones from being thrown into the front of your engine and/or radiator! - $29.95 BUY THIS ITEM(PHOTO)(pic on bike)
Front Fender Rail/Bumper
Fender Rails/Bumpers and Trim
V-Star 650
#63-121
Chrome Front Fender Rail - Steel twin rail design mounts
to front forks. Bolts on easily to original fender mounting bracket. FITS: Yamaha
V-Star 650 Classic - $67.95 BUY THIS ITEM(PHOTO)
V-Star 1100
#63-121
Chrome Front Fender Rail - Steel twin rail design mounts
to front forks. Bolts on easily to original fender mounting bracket. FITS: Yamaha
V-Star 1100 Classic - $67.95 BUY THIS ITEM(PHOTO)
Road Star 1600 & 1700
#62-104
Chrome Front Fender Rail - Steel twin rail design mounts
to front forks. Bolts on easily to original fender mounting bracket. FITS: Yamaha
Road Star 1600/1700 - $62.96 BUY THIS ITEM(PHOTO)
Royal Star Venture
#61-112
Chrome Front Fender Rail - Steel twin rail design mounts
to front forks. Bolts on easily to original fender mounting bracket. FITS: Yamaha
Venture Royal Star - $DISCONTIN BUY THIS ITEM(PHOTO)
1 pc Front Fender Trim
1 pc Rear Fender Trim
National Cycle Fender Tips
--V-Star 650 Custom---
-> #N727 Front
Fender Trim, V-Star 650 Custom -
Fits all years V-Star 650 Custom -
$61.70 BUY THIS ITEM(PHOTO)
-> #N728 Rear
Fender Trim, V-Star 650 Custom -
Fits all years V-Star 650 Custom -
$Discontinu BUY THIS ITEM(PHOTO)
--V-Star 1100 Custom---
-> #N727 Front
Fender Trim, V-Star 1100 Custom -
Fits all years V-Star 1100 Custom -
$61.70 BUY THIS ITEM(PHOTO)
Smooth Front Fender Tip
Triceptor Front Fender Tip
Kuryakyn Fender Tip
-> #7344 Front Fender Tip-
Fits all V-Star 650/1100/1300, Roadstar 1600/1700, Stratoliner, Roadliner. Installs easily, no drilling required -
$29.43 BUY THIS ITEM(PHOTO)
-> #7340 Triceptor Front Fender Tip-
Fits all V-Star 650/1100/1300, Roadstar 1600/1700, Stratoliner, Roadliner, Raider, Raider-S. Installs easily, no drilling required -
$38.63 BUY THIS ITEM(PHOTO)
Valve Stem Caps, Inflators, etc.
Valve Stem Covers
CO2 Inflator and Refills
Tire Stuff -
Valve Stem covers to add the finishing touch to your wheels, Air Pressure
Gauges to keep the pressure in check, and CO2 Inflators and Refills to get you back up and
rolling quickly!
-> Ribbed Valve Stem Covers- $8.96 (pair)
BUY
THIS ITEM
-> Eagle Valve Stem Covers- $13.46 (pair)
BUY
THIS ITEM
-> UltraFlate + CO2 Tire Inflator. Refills
tires instantly from a small CO2 container...easily stored in windshield bag or tool roll,
COMPACT Security for your tires! - $18.95
BUY
THIS ITEM(photo)
<- VISIT
