Use the links
above to navigate our on-line catalog.
All prices
listed are in U.S. Dollars ($). Use the Personal
Currency Assistant to convert your local currency.
Chrome Fasteners for Metric Applications!
New Supplier allows for 40%-70% OFF!!! Yep, our chrome
bolts are the cheapest, EVER! Thanks to a new supplier and a quantity purchasing agreement, we
now have the deepest discounts on chrome bolts, EVER. We have 10's of thousands of pieces in
stock, and ready to ship!
Scootworks is a distributor of
chrome fasteners for your metric motorcycle. Below is a listing of our fasteners
categorized by fastener type, size in mm, thread pitch (# of threads/mm),
and length in mm. Select the parts you wish to purchase, and don't forget to
choose the quantity needed. If you should not find a specific metric fastener
in our selection, please email us at
shipper3@scootworks.com and
include as much info as possible about the chrome nuts/bolts/washers you
need!
Tips for selecting and using chrome fasteners and hole plugs:
When installing Socket head fasteners, always use a clean, unworn allen wrench of the
correct size. An undersized or worn (semi-rounded) wrench will cause micro-fractures in the chrome plating within the
socket, eventually leading to rust. Use an inch-pound torque wrench to avoid over tensioning
if possible, as this will also cause micro-fractures in chrome plating. Ball wrenches should be avoided if
at all possible.
Once installation of your allen head fasteners is complete,
help protect the allen cavity from rust by applying a dab of clear enamel in the holes with
a Q-tip or other similar cotton swab.
When the enamel has dried for 24 hours, use a cotton swab to apply a coat of automotive
wax, and a fresh swab to wipe clean.
When choosing replacement hex head fasteners, be sure to measure the the shaft diameter.
A common mistake is to order fasteners based on the size of wrench required to fit, rather than
the actual shaft size by which fasteners are categorized.
When installing chrome hex head fasteners, always use only 6 point
wrenches or sockets to distribute tightening forces along the entire surface of the fastener's
flats. 12 point wrenches or sockets will damage the edges of chrome fasteners, inviting
rust and/or peeling of the finish. It is also advisable to tighten with a torque wrench to
avoid over tensioning.
Button head vs. socket head bolts: A common mistake
when selecting button or socket head bolts is due to the misunderstanding of the
terminology. The top or exposed portion of a button head bolt is curved, like a small
dome. They are smooth to the touch, and have no sharp edges exposed. A socket head
bolt looks more like a one would perceive a conventional allen bolt to appear, exposing a
small tubular head with the socket section used by the allen wrench being a
pronounced feature in appearance. Be sure to observe the photos below that accompany
each category for a better understanding of these two different fasteners.
Plug, (or button) caps are typically intended for use with socket
head bolts, not button head bolts . They get the name "button" caps from their shape, appearing
as a small, chrome looking button...filling the cavity used by an allen wrench for installation and
removal. While these are sometimes used to plug the opening of a large button head bolt (M10 or greater),
most of the smaller button head bolts look odd with a plug installed in them. The allen cavity
of the smaller button head bolts (M6 or smaller) is usually too shallow to
accept hole plugs, and the button portion of the plug will extend beyond the
curvature of the bolt head. This is due to the dome or curved shape of the
top of the button head bolt. Plug caps look best when used with socket head
bolts. These plugs are not chrome plated, but are nickel plated with a nicely
polished finish that matches your chrome fasteners.
Plug Caps
**NOTE** Select all fasteners desired, then scroll to
the BOTTOM of the page and click [ADD TO CART] only once to add all fastener selections to your
order...
Part #
Description
Price Ea.
Quantity
CP-XSMALL
XSmall Plug Cap fits hole for 4 mm wrench
.40
CP-SMALL
Small Plug Cap fits hole for 5 mm wrench
.40
CP-MEDIUM
Medium Plug Cap fits hole for 6 mm wrench
.40
CP-Large
Large Plug Cap fits hole for 8 mm wrench
.40
CP-XLARGE
XLARGE Plug Cap fits hole for 10 mm wrench
.40
Socket Head Allen Bolts
**NOTE** Select all fasteners desired, then scroll to
the BOTTOM of the page and click [ADD TO CART] only once to add all fastener selections to your
order...
Part #
Description
Price Ea.
Quantity
10722
M5 x .8 x 10mm
2.33
10726
M5 x .8 x 20mm
2.36
10728
M5 x .8 x 30mm
2.66
10730
M5 x .8 x 40mm
2.84
10735
M6 x 1.0 x 10mm
2.17
10738
M6 x 1.0 x 16mm
2.39
10739
M6 x 1.0 x 20mm
2.52
10741
M6 x 1.0 x 30mm
2.69
10743
M6 x 1.0 x 40mm
2.85
10745
M6 x 1.0 x 50mm
3.10
10747
M6 x 1.0 x 60mm
3.40
10749
M6 x 1.0 x 70mm
3.75
10751
M6 x 1.0 x 80mm
4.04
10770
M8 x 1.25 x 10mm
2.40
10773
M8 x 1.25 x 20mm
2.74
10775
M8 x 1.25 x 30mm
2.98
10777
M8 x 1.25 x 40mm
3.40
10779
M8 x 1.25 x 50mm
3.73
10781
M8 x 1.25 x 60mm
3.90
10783
M8 x 1.25 x 70mm
4.20
10785
M8 x 1.25 x 80mm
4.62
10788
M8 x 1.25 x 100mm
6.64
10790
M8 x 1.25 x 120mm
7.35
10817
M10 x 1.25 x 25mm
4.10
10821
M10 x 1.25 x 45mm
5.60
10822
M10 x 1.25 x 50mm
5.85
10794
M10 x 1.50 x 20mm
3.64
10795
M10 x 1.50 x 25mm
3.80
10798
M10 x 1.50 x 40mm
4.04
10802
M10 x 1.50 x 60mm
4.98
10804
M10 x 1.50 x 70mm
5.01
10806
M10 x 1.50 x 80mm
5.71
Hex Head Bolts
**NOTE** Select all fasteners desired, then scroll to
the BOTTOM of the page and click [ADD TO CART] only once to add all fastener selections to your
order...
Part #
Description
Price Ea.
Quantity
11722
M5 x 0.8 x 10mm
2.33
11726
M5 x 0.8 x 20mm
2.36
11728
M5 x 0.8 x 30mm
2.66
11730
M5 x 0.8 x 40mm
2.84
11735
M6 x 1.0 x 10mm
2.17
11739
M6 x 1.0 x 20mm
2.52
11741
M6 x 1.0 x 30mm
2.69
11742
M6 x 1.0 x 30mm
2.75
11743
M6 x 1.0 x 40mm
2.85
11745
M6 x 1.0 x 50mm
3.10
11747
M6 x 1.0 x 60mm
3.40
11749
M6 x 1.0 x 70mm
3.75
11751
M6 x 1.0 x 80mm
4.04
11770
M8 x 1.25 x 10mm
2.40
11773
M8 x 1.25 x 20mm
2.74
11774
M8 x 1.25 x 25mm
2.83
11775
M8 x 1.25 x 30mm
2.98
11777
M8 x 1.25 x 40mm
3.40
11779
M8 x 1.25 x 50mm
3.73
11781
M8 x 1.25 x 60mm
3.95
11783
M8 x 1.25 x 70mm
4.20
11785
M8 x 1.25 x 80mm
4.62
11787
M8 x 1.25 x 90mm
4.31
11790
M8 x 1.25 x 120mm
4.58
11816
M10 x 1.25 x 20mm
3.76
11818
M10 x 1.25 x 30mm
4.02
11820
M10 x 1.25 x 40mm
4.30
11821
M10 x 1.25 x 45mm
4.68
11822
M10 x 1.25 x 50mm
4.89
11824
M10 x 1.25 x 60mm
5.97
11826
M10 x 1.25 x 70mm
6.53
11828
M10 x 1.25 x 80mm
7.20
11794
M10 x 1.50 x 20mm
3.64
11798
M10 x 1.50 x 40mm
4.04
11800
M10 x 1.50 x 50mm
4.55
11802
M10 x 1.50 x 60mm
4.98
11804
M10 x 1.50 x 70mm
5.01
11806
M10 x 1.50 x 80mm
5.71
Button Head Allen Bolts
**NOTE** Select all fasteners desired, then scroll to
the BOTTOM of the page and click [ADD TO CART] only once to add all fastener selections to your
order...
Part #
Description
Price Ea.
Quantity
13738
M6 x 1.0 x 16mm
3.41
13739
M6 x 1.0 x 20mm
3.46
13740
M6 x 1.0 x 25mm
3.49
13741
M6 x 1.0 x 30mm
3.57
13742
M6 x 1.0 x 35mm
3.75
13743
M6 x 1.0 x 40mm
4.06
13772
M8 x 1.25 x 16mm
3.40
13773
M8 x 1.25 x 20mm
3.45
13774
M8 x 1.25 x 25mm
3.55
13775
M8 x 1.25 x 30mm
3.55
13776
M8 x 1.25 x 35mm
3.83
13777
M8 x 1.25 x 40mm
3.99
13779
M8 x 1.25 x 50mm
4.45
13785
M8 x 1.25 x 80mm
7.10
13794
M10 x 1.50 x 20mm
3.64
13795
M10 x 1.50 x 25mm
3.75
13796
M10 x 1.50 x 30mm
3.89
13798
M10 x 1.50 x 40mm
4.04
MPB805
M12 x 1.75 x 20mm
6.67
13837
M12 x 1.75 x 30mm
6.75
MPB807
M12 x 1.75 x 40mm
7.62
Acorn Nuts
**NOTE** Select all fasteners desired, then scroll to
the BOTTOM of the page and click [ADD TO CART] only once to add all fastener selections to your
order...
Part #
Description
Price Ea.
Quantity
21952
M5 x 0.8
1.50
21954
M6 x 1.0
1.75
21958
M8 x 1.25
1.96
21961
M10 x 1.25
3.92
21962
M10 x 1.5
3.92
21963
M12 x 1.25
6.37
Hex Nuts
**NOTE** Select all fasteners desired, then scroll to
the BOTTOM of the page and click [ADD TO CART] only once to add all fastener selections to your
order...
Part #
Description
Price Ea.
Quantity
15954
M6 x 1.0
1.43
15958
M8 x 1.25
1.60
15961
M10 x 1.25
2.05
15962
M10 x 1.5
2.05
Nylock Nuts
**NOTE** Select all fasteners desired, then scroll to
the BOTTOM of the page and click [ADD TO CART] only once to add all fastener selections to your
order...
Part #
Description
Price Ea.
Quantity
17954
M6 x 1.0
1.89
17958
M8 x 1.25
2.21
17961
M10 x 1.25
3.78
17962
M10 x 1.50
3.78
Flat Washers
**NOTE** Select all fasteners desired, then scroll to
the BOTTOM of the page and click [ADD TO CART] only once to add all fastener selections to your
order...
Part #
Description
Price Ea.
Quantity
23986
M5
1.41
23987
M6
1.42
23989
M8
1.44
23282
M8 Super-Washer, M8 I.D. x 1-1/8" O.D.
3.00
23738A
M8 SuperThick
2.89
23990
M10
1.44
Click [ADD TO CART] below only once to add all fastener selections to your order...